| Isle width [message #164822] |
Sat, 31 March 2012 19:32  |
1275gtsport
Messages: 272
Registered: September 2009
Location: Rothesay NB
Karma: 0
|
Senior Member |
|
|
OK doing some rebuilding. have the material for the flooring and looking at only doing this once.
the wardrobe is not in straight. I know this Because the bathroom door won't open all the way and when I place a level on the shower module it shows as plumb the wardrobe is not. The closet door will open all the way.
I need to know if the "kickplate" is the right distance apart and the cabinet part of the wardrobe is not on it right. this assumes that it is in 2 pieces in the first place.
The Wardrobe needs to be replaced and I am planning on doing it, next year. but I don't want to end up with a gap between my floor and the kick plate.
Thanks.
Adam Raeburn
Rothesay, NB
1976 Austin Mini
1977 GMC Palm Beach
---------------------------------------------------
Once you replace everything that is attached to something else. It will all be fixed.
|
|
|
|
|
|
| Re: Isle width [message #164857 is a reply to message #164822] |
Sun, 01 April 2012 01:46  |
Adrien G.
Messages: 474
Registered: May 2008
Location: Burns Flat, OK 73624
Karma: 1
|
Senior Member |
|
|
Adam writes,
>the wardrobe is not in straight. I know this Because the bathroom door won't open all the way and when I place a level on the shower module it shows as plumb the wardrobe is not<
Adam,
The OEM closet module (on the forward side, kitchen side)has nothing securing it at top or at least at the belt line, and very little on the floor, because of the cutouts for the heater and sink drain. The floor bracket may have broken loose, push the bottom of module in place by removing the kitchen floor panel next to the closet.
For the top, with a spacer to keep the top in place, try to fasten the end of the overhead cabinet to it, or if want to fasten it to the body, the overhead cabinet will have to come down.
The toe kick is fastened from the back side to the face frame, if it's coming loose pry up the module and cut a block to put in front of and against the toe kick under the face frame.
Hope this is of some help.
Adrien & Jenny Genesoto
75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
|
|
|
|
|
|
|
|
| Re: Isle width [message #164928 is a reply to message #164850] |
Sun, 01 April 2012 18:45 |
Chr$
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
You mean it's raining very WELL tonight. 
| Harry wrote on Sat, 31 March 2012 21:39 |
Isle is a small island. We have plenty out here. Which one do you want measured?
Oh, the aisle? I can do that for you in the morning. It's raining really good tonight.
|
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
