GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » is this thermostat in correct place ?
is this thermostat in correct place ? [message #164680] Thu, 29 March 2012 22:55 Go to next message
glacierfl   United States
Messages: 444
Registered: June 2011
Karma: 0
Senior Member

Hello,

The image link below shows what seems to be a thermostat. Is this the correct position, or is it a PM add on ???.
Also does anyone know what the model # is etc, and where i can get a replacement, at Napa perhaps ??

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41431&title=img-5127r&cat=1

thank you

cheers and beers


Steve & Debbie Monticello, FL 77 Palm Beach :- Aurora EX G4WDT
Re: is this thermostat in correct place ? [message #164683 is a reply to message #164680] Thu, 29 March 2012 23:02 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
That is a vacuum controlled hot water valve that controls water flow through the heater core. I don't have a part number but you should be able to find one at any parts store for 5/8" hoses.

Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org
Re: is this thermostat in correct place ? [message #164703 is a reply to message #164680] Fri, 30 March 2012 08:37 Go to previous messageGo to next message
Dennis S is currently offline  Dennis S   United States
Messages: 3046
Registered: November 2005
Karma: 2
Senior Member
glacierfl wrote on Thu, 29 March 2012 22:55

Hello,

The image link below shows what seems to be a thermostat. Is this the correct position, or is it a PM add on ???.
Also does anyone know what the model # is etc, and where i can get a replacement, at Napa perhaps ??

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41431&title=img-5127r&cat=1

thank you

cheers and beers


Look here..

http://www.gmcmhphotos.com/photos/showphoto.php?photo=30899&title=gmc-motorhome-009&cat=4620

Dennis


Dennis S
73 Painted Desert 230
Memphis TN Metro
Re: is this thermostat in correct place ? [message #164706 is a reply to message #164680] Fri, 30 March 2012 10:05 Go to previous messageGo to next message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
Senior Member
The water valves were there from the factory. No vacuum signal is open (heat) and vacuum closes the valve for AC in the cold or Rec position. There are several varients of these GM/aftermarket used in brass or plastic and any should work. It is positioned by the hose cut lengths and can be tucked in a little neater when you change the hoses. Also those clamps are too big a number size and buy the ones with the extended tang so the the hose rubber doesn't extrude out through the spiral threads. I glanced at www.appliedGMC.com and didn't see them but I'm sure Jim K has them or try www.gmcmotorhomeparts.com at Gateway.

John Lebetski
Woodstock, IL
77 Eleganza II
Re: [GMCnet] is this thermostat in correct place ? [message #164717 is a reply to message #164706] Fri, 30 March 2012 11:55 Go to previous message
rssbob is currently offline  rssbob   United States
Messages: 259
Registered: January 2004
Location: La Mesa, Ca. (San Diego a...
Karma: 0
Senior Member
I think that is also one that some have replaced with a plain old , hand operated shut-off valve so they could control when they wanted to control when they wanted hot water to be able to enter the interior heater.
Bob

On Mar 30, 2012, at 8:05 AM, John R. Lebetski wrote:

>
>
> The water valves were there from the factory. No vacuum signal is open (heat) and vacuum closes the valve for AC in the cold or Rec position. There are several varients of these GM/aftermarket used in brass or plastic and any should work. It is positioned by the hose cut lengths and can be tucked in a little neater when you change the hoses. Also those clamps are too big a number size and buy the ones with the extended tang so the the hose rubber doesn't extrude out through the spiral threads. I glanced at www.appliedGMC.com and didn't see them but I'm sure Jim K has them or try www.gmcmotorhomeparts.com at Gateway.
> --
> John Lebetski
> Chicago, IL
> 77 Eleganza II
> Source America First
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Bob Sobrito
78 Palm Beach
La Mesa, Ca
Previous Topic: First and Sencond Place Winners
Next Topic: Jim B's Daily Pose
Goto Forum:
  


Current Time: Mon Nov 18 11:18:40 CST 2024

Total time taken to generate the page: 0.00891 seconds