Home » Public Forums » GMCnet » [GMCnet] I bought a parts 6.0 Power Drawer today -- How similar is it to a 4.0 Power Drawer?
| [GMCnet] I bought a parts 6.0 Power Drawer today -- How similar is it to a 4.0 Power Drawer? [message #164528] |
Wed, 28 March 2012 22:57  |
henryblairjr
Messages: 43
Registered: February 2012
Karma: 0
|
Member |
|
|
When I drive the 100 miles back to my other home in Pittsboro, NC, I always
check on Craig's List to see what may be for sale near the route. Today I
found a 6.0 Power Drawer without the drawer, but the front cover with 6.0
on it is with it, no starter, and a box of parts and mounts. I also have a
4.0 Power Dawer that is complete.
I found the 6.0 Operator's Manual and Parts Catalog on line and printed it
out, but I did not find the similar 4.0 Document. What I really need to
know is which parts are interchangeable. Are the drawers interchangeable?
Are the control panels interchangeable? How similar are the engines. I
will not be back to my shop where the 4.0 is until next week.
Does anyone know where I can find a 4.0 Operator's and Parts manual on the
Internet?
Thanks in advance for your help.
Henry
Henry K. Blair, Jr.
603 South Walton Street
Bethune, SC 29009-9032
(770) 998-4897, Cell (770) 827-7392
henryblairjr@gmail.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] I bought a parts 6.0 Power Drawer today -- How similar is it to a 4.0 Power Drawer? [message #164530 is a reply to message #164528] |
Wed, 28 March 2012 23:09  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
| henryblairjr wrote on Wed, 28 March 2012 23:57 |
When I drive the 100 miles back to my other home in Pittsboro, NC, I always check on Craig's List to see what may be for sale near the route. Today I found a 6.0 Power Drawer without the drawer, but the front cover with 6.0 on it is with it, no starter, and a box of parts and mounts. I also have a 4.0 Power Dawer that is complete.
I found the 6.0 Operator's Manual and Parts Catalog on line and printed it out, but I did not find the similar 4.0 Document. What I really need to know is which parts are interchangeable. Are the drawers interchangeable?
Are the control panels interchangeable? How similar are the engines. I will not be back to my shop where the 4.0 is until next week.
Does anyone know where I can find a 4.0 Operator's and Parts manual on the Internet?
Thanks in advance for your help.
Henry
|
Henry,
For a manual:http://www.bdub.net/manuals/index.html
There is very little that is common between the BF (4.0) and NH (6.0) Onans.
But if you are willing to bring them to a rally, Ken Burton would like a non-cracked flywheel and I know someone that needs a field.
Matt from GMCMI at Shawnee and going to bed.
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
| Re: [GMCnet] I bought a parts 6.0 Power Drawer today -- How similar is it to a 4.0 Power Drawer? [message #164538 is a reply to message #164530] |
Thu, 29 March 2012 00:03 |
henryblairjr
Messages: 43
Registered: February 2012
Karma: 0
|
Member |
|
|
Thanks for your quick reply. I am printing out the manuals and I will see
what I have.
Henry
Henry K. Blair, Jr.
603 South Walton Street
Bethune, SC 29009-9032
(770) 998-4897, Cell (770) 827-7392
henryblairjr@gmail.com
On Thu, Mar 29, 2012 at 12:09 AM, Matt Colie <matt7323tze@gmail.com> wrote:
>
>
> henryblairjr wrote on Wed, 28 March 2012 23:57
> > When I drive the 100 miles back to my other home in Pittsboro, NC, I
> always check on Craig's List to see what may be for sale near the route.
> Today I found a 6.0 Power Drawer without the drawer, but the front cover
> with 6.0 on it is with it, no starter, and a box of parts and mounts. I
> also have a 4.0 Power Dawer that is complete.
> >
> > I found the 6.0 Operator's Manual and Parts Catalog on line and printed
> it out, but I did not find the similar 4.0 Document. What I really need to
> know is which parts are interchangeable. Are the drawers interchangeable?
> > Are the control panels interchangeable? How similar are the engines.
> I will not be back to my shop where the 4.0 is until next week.
> >
> > Does anyone know where I can find a 4.0 Operator's and Parts manual on
> the Internet?
> >
> > Thanks in advance for your help.
> >
> > Henry
>
> Henry,
>
> For a manual:http://www.bdub.net/manuals/index.html
>
> There is very little that is common between the BF (4.0) and NH (6.0)
> Onans.
> But if you are willing to bring them to a rally, Ken Burton would like a
> non-cracked flywheel and I know someone that needs a field.
>
> Matt from GMCMI at Shawnee and going to bed.
> --
> Matt & Mary Colie
> '73 Glacier 23 Chaumière (say show-me-air) Just about as stock as you will
> find
> SE Michigan - Twixt A2 and Detroit
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] I bought a parts 6.0 Power Drawer today -- How similar is it to a 4.0 Power Drawer? [message #164555 is a reply to message #164530] |
Thu, 29 March 2012 09:28 |
henryblairjr
Messages: 43
Registered: February 2012
Karma: 0
|
Member |
|
|
I am too far from the rally, but if your friends need these parts for a
6.0, tell them to give me a call. I think I am going to try to get the 4.0
running. You are right -- similarities seem to be minor.
Henry
Henry K. Blair, Jr.
603 South Walton Street
Bethune, SC 29009-9032
(770) 998-4897, Cell (770) 827-7392
henryblairjr@gmail.com
On Thu, Mar 29, 2012 at 12:09 AM, Matt Colie <matt7323tze@gmail.com> wrote:
>
>
> henryblairjr wrote on Wed, 28 March 2012 23:57
> > When I drive the 100 miles back to my other home in Pittsboro, NC, I
> always check on Craig's List to see what may be for sale near the route.
> Today I found a 6.0 Power Drawer without the drawer, but the front cover
> with 6.0 on it is with it, no starter, and a box of parts and mounts. I
> also have a 4.0 Power Dawer that is complete.
> >
> > I found the 6.0 Operator's Manual and Parts Catalog on line and printed
> it out, but I did not find the similar 4.0 Document. What I really need to
> know is which parts are interchangeable. Are the drawers interchangeable?
> > Are the control panels interchangeable? How similar are the engines.
> I will not be back to my shop where the 4.0 is until next week.
> >
> > Does anyone know where I can find a 4.0 Operator's and Parts manual on
> the Internet?
> >
> > Thanks in advance for your help.
> >
> > Henry
>
> Henry,
>
> For a manual:http://www.bdub.net/manuals/index.html
>
> There is very little that is common between the BF (4.0) and NH (6.0)
> Onans.
> But if you are willing to bring them to a rally, Ken Burton would like a
> non-cracked flywheel and I know someone that needs a field.
>
> Matt from GMCMI at Shawnee and going to bed.
> --
> Matt & Mary Colie
> '73 Glacier 23 Chaumière (say show-me-air) Just about as stock as you will
> find
> SE Michigan - Twixt A2 and Detroit
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] I bought a parts 6.0 Power Drawer today -- How similar is it to a 4.0 Power Drawer? [message #164565 is a reply to message #164557] |
Thu, 29 March 2012 10:14 |
henryblairjr
Messages: 43
Registered: February 2012
Karma: 0
|
Member |
|
|
Thanks, George, for your generous offer. I am in Atlanta frequently as my
son, Dr. Henry Blair III, is an oral surgeon with Atlanta Oral and Facial
Surgery. I lived in Atlanta from 1987 to 2010. I will gladly take the
parts to you in Atlanta if there is any interest. Pictures will be
available soon.
I just looked up Bean Station, TN, and saw that it is only about 5 hours
from Bethune. When is the event, and how large is it. In the next year I
plan to buy a GMC motor home. I will want restored to a high level as I
have found that buying one like that gets the restoration for pennies on
the dollar. If there will be a number of motor homes there, i may go for
the education.
Henry K. Blair, Jr.
603 South Walton Street
Bethune, SC 29009-9032
(770) 998-4897, Cell (770) 827-7392
henryblairjr@gmail.com
On Thu, Mar 29, 2012 at 10:45 AM, George Zhookoff <
George.Zhookoff@haskell.com> wrote:
>
>
> [quote title=henryblairjr wrote on Thu, 29 March 2012 09:28]I am too far
> from the rally, but if your friends need these parts for a
> 6.0, tell them to give me a call. Henry
>
> Henry K. Blair, Jr.
> > But if you are willing to bring them to a rally, Ken Burton would like a
> > non-cracked flywheel and I know someone that needs a field.
> >
> > Matt from GMCMI at Shawnee and going to bed.
>
> Henry,
>
> I'm in Atlanta and plan on going to Bean Station. If you get requests for
> parts I'd be more then happy to run up to SC, get the parts and tote them
> to Bean Station for anyone that could pick the parts up at the rally.
>
> George Zhookoff
> 78 EL II
> Atlanta
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 15:45:51 CST 2024
Total time taken to generate the page: 0.10300 seconds
|
GMCforum
Search
Help
Register
Login
Home
