GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Check Those Axle Bolts
Check Those Axle Bolts [message #163172] Fri, 16 March 2012 13:38 Go to previous message
WD0AFQ is currently offline  WD0AFQ   United States
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma:
Senior Member
Make sure you check those bolts. Bert Curtis wired mine. After we pulled the first blown engine I have not rewired them. Every time I check the driver's side, they are loose. The plan is to rewire them. My passenger side bolts are always tight. I have been around when a couple of axles came loose. Not a good sound. Can you imagine that axle flailing around under there? There are a couple of guys on this net that can tell you all about it.
Takes 3 minutes to snug them. I can wiggle around and get all of mine from the top. At least this time my header bolts remained tight. Using the thick Remflex that Jim K. gave me. We have about 3500 miles on this engine install. I had 2,000 on it last time I had to tighten the header bolts.
I think being able to see our engine, from the driver's seat, keeps me checking things before each trip. All intake bolts were tight, but as usual, had to snug the tappet cover bolts and the thermostat bolts.
Looking forward to seeing our friends next week and praying for "uneventful" trips for everyone.
Dan and Teri


3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Inner Frame Repair:
Next Topic: Re: [GMCnet] Window Felt
Goto Forum:
  


Current Time: Sun Oct 06 07:25:10 CDT 2024

Total time taken to generate the page: 0.01323 seconds