Home » Public Forums » GMCnet » [GMCnet] Final Drive gasket
| [GMCnet] Final Drive gasket [message #162405] |
Wed, 07 March 2012 11:47  |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Netters
When others asked I wasn't paying attention, and now I need to ask.
The cover gasket for the final drive that I picked up this morning is a
Felpro RDS 55034, a one piece thing without a staple holding 2 thinner
pieces of gasket together.
Can the New style be used without any problem or is there a special
preparation required before installation or do I just return it?
Thanks guys
Mike in NS
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Final Drive gasket [message #162467 is a reply to message #162405] |
Thu, 08 March 2012 11:24  |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
When I changed out my final drive last summer TWICE, the 2nd time it came with a
single piece gasket and it works fine.
Ray
Ray & Lisa
78 Royale "Great Lakes Eagle"
Center Kitchen TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
----- Original Message ----
From: Kingsley Coach <kingsleygmc@gmail.com>
To: Gmclist <Gmclist@temp.gmcnet.org>
Sent: Wed, March 7, 2012 11:47:00 AM
Subject: [GMCnet] Final Drive gasket
Netters
When others asked I wasn't paying attention, and now I need to ask.
The cover gasket for the final drive that I picked up this morning is a
Felpro RDS 55034, a one piece thing without a staple holding 2 thinner
pieces of gasket together.
Can the New style be used without any problem or is there a special
preparation required before installation or do I just return it?
Thanks guys
Mike in NS
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
| Re: [GMCnet] Final Drive gasket [message #162469 is a reply to message #162467] |
Thu, 08 March 2012 12:01 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Thanks Ray
I hope I only have to do it once...<g>
Mike in NS
On Thu, Mar 8, 2012 at 12:24 PM, Ray Erspamer <78gmc-royale@att.net> wrote:
> When I changed out my final drive last summer TWICE, the 2nd time it came
> with a
> single piece gasket and it works fine.
>
> Ray
>
>
> Ray & Lisa
> 78 Royale "Great Lakes Eagle"
> Center Kitchen TZE368V101144
> Wauwatosa, Wisconsin 53226
> Email: 78GMC-Royale@att.net
> 414-745-3188
> Web Site: http://ray-lisa.page.tl/
>
>
>
> ----- Original Message ----
> From: Kingsley Coach <kingsleygmc@gmail.com>
> To: Gmclist <Gmclist@temp.gmcnet.org>
> Sent: Wed, March 7, 2012 11:47:00 AM
> Subject: [GMCnet] Final Drive gasket
>
> Netters
> When others asked I wasn't paying attention, and now I need to ask.
> The cover gasket for the final drive that I picked up this morning is a
> Felpro RDS 55034, a one piece thing without a staple holding 2 thinner
> pieces of gasket together.
> Can the New style be used without any problem or is there a special
> preparation required before installation or do I just return it?
>
> Thanks guys
>
> Mike in NS
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Final Drive gasket [message #162472 is a reply to message #162405] |
Thu, 08 March 2012 12:21 |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Mike,
You may want to read this old thread -- and note the comment about the vent hole in the final drive...
http://goo.gl/RYZ6F
Dennis
| Kingsley Coach wrote on Wed, 07 March 2012 11:47 |
Netters
When others asked I wasn't paying attention, and now I need to ask.
The cover gasket for the final drive that I picked up this morning is a
Felpro RDS 55034, a one piece thing without a staple holding 2 thinner
pieces of gasket together.
Can the New style be used without any problem or is there a special
preparation required before installation or do I just return it?
Thanks guys
Mike in NS
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
| Re: [GMCnet] Final Drive gasket [message #162509 is a reply to message #162469] |
Thu, 08 March 2012 21:24 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
The one piece gasket cannot be wrong.
They were having problems with stapling it backwards.
On Thu, Mar 8, 2012 at 10:01 AM, Kingsley Coach <kingsleygmc@gmail.com> wrote:
> Thanks Ray
> I hope I only have to do it once...<g>
>
> Mike in NS
>
> On Thu, Mar 8, 2012 at 12:24 PM, Ray Erspamer <78gmc-royale@att.net> wrote:
>
>> When I changed out my final drive last summer TWICE, the 2nd time it came
>> with a
>> single piece gasket and it works fine.
>>
>> Ray
>>
>>
>> Ray & Lisa
>> 78 Royale "Great Lakes Eagle"
>> Center Kitchen TZE368V101144
>> Wauwatosa, Wisconsin 53226
>> Email: 78GMC-Royale@att.net
>> 414-745-3188
>> Web Site: http://ray-lisa.page.tl/
>>
>>
>>
>> ----- Original Message ----
>> From: Kingsley Coach <kingsleygmc@gmail.com>
>> To: Gmclist <Gmclist@temp.gmcnet.org>
>> Sent: Wed, March 7, 2012 11:47:00 AM
>> Subject: [GMCnet] Final Drive gasket
>>
>> Netters
>> When others asked I wasn't paying attention, and now I need to ask.
>> The cover gasket for the final drive that I picked up this morning is a
>> Felpro RDS 55034, a one piece thing without a staple holding 2 thinner
>> pieces of gasket together.
>> Can the New style be used without any problem or is there a special
>> preparation required before installation or do I just return it?
>>
>> Thanks guys
>>
>> Mike in NS
>>
>> --
>> Michael Beaton
>> 1977 Kingsley 26-11
>> 1977 Eleganza II 26-3
>> Antigonish, NS
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
|
|
| Re: [GMCnet] Final Drive gasket [message #214794 is a reply to message #214764] |
Thu, 18 July 2013 00:19 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
The old stockfrom Fel Pro was in two pieces, and most of
On Wed, Jul 17, 2013 at 6:32 PM, Emery Stora <emerystora@me.com> wrote:
> Probably not. If you look at the face there should be a vent at about the
> 1:00 position.
>
> Just order one from Jim Kanomsta and it will be the right one.
>
> Emery Stora
>
> On Jul 17, 2013, at 8:59 AM, LW <tux@apex-internet.com> wrote:
>
> >
> >
> > Does this look like the correct gasket? I too am going to need one
> soon. I am not sure what the integral vent maze is supposed to look like.
> >
> >
> http://shop.advanceautoparts.com/wcsstore/CVWEB/staticproductimage//2151/large/19780701_fel_rds55034_pri_larg.jpg
> >
> > Thank you!
> >
> > --
> > Chris
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Final Drive gasket [message #214796 is a reply to message #214794] |
Thu, 18 July 2013 00:21 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
they were stapled together wrong.
On Wed, Jul 17, 2013 at 10:19 PM, Jim Kanomata <jimkanomata@gmail.com>wrote:
> The old stockfrom Fel Pro was in two pieces, and most of
>
>
> On Wed, Jul 17, 2013 at 6:32 PM, Emery Stora <emerystora@me.com> wrote:
>
>> Probably not. If you look at the face there should be a vent at about
>> the 1:00 position.
>>
>> Just order one from Jim Kanomsta and it will be the right one.
>>
>> Emery Stora
>>
>> On Jul 17, 2013, at 8:59 AM, LW <tux@apex-internet.com> wrote:
>>
>> >
>> >
>> > Does this look like the correct gasket? I too am going to need one
>> soon. I am not sure what the integral vent maze is supposed to look like.
>> >
>> >
>> http://shop.advanceautoparts.com/wcsstore/CVWEB/staticproductimage//2151/large/19780701_fel_rds55034_pri_larg.jpg
>> >
>> > Thank you!
>> >
>> > --
>> > Chris
>> > _______________________________________________
>> > GMCnet mailing list
>> > Unsubscribe or Change List Options:
>> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
Goto Forum:
Current Time: Fri Nov 15 19:20:49 CST 2024
Total time taken to generate the page: 0.01146 seconds
|
GMCforum
Search
Help
Register
Login
Home
