GMCforum: GMCnet » [GMCnet] Bogie thrust washer alignment pin extractor needed.

Home » Public Forums » GMCnet » [GMCnet] Bogie thrust washer alignment pin extractor needed.

Fri, 17 February 2012 12:35

Jp Benson

Messages: 649
Registered: October 2011
Location: Fla

Karma: 2

Senior Member

Rebuilding one of my bogies and somehow pushed the alignment pins to far into the holes.
http://www.gmcmhphotos.com/photos/showphoto.php?photo=42651&title=alignment-pin&cat=6011

Does anyone know of a non-destructrive way for extracting these pins.� There's not enough left protruding to grab with pliers and I'd rather not drill.

Thanks,
Paul
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Fri, 17 February 2012 16:20

sgltrac

Messages: 2797
Registered: April 2011

Karma: 1

Senior Member

Leave the over driven one there. The two remaining ones are enough to keep it from turning. Use a lot of grease on both faces of the washer and assemble it.

Sully
77 royale
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: Jp Benson <chocomo99@yahoo.com>
Sender: gmclist-bounces@temp.gmcnet.org
Date: Fri, 17 Feb 2012 10:35:39
To: gmclist@temp.gmcnet.org<gmclist@temp.gmcnet.org>
Reply-To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Bogie thrust washer alignment pin extractor needed.

Rebuilding one of my bogies and somehow pushed the alignment pins to far into the holes.
http://www.gmcmhphotos.com/photos/showphoto.php?photo=42651&title=alignment-pin&cat=6011

Does anyone know of a non-destructrive way for extracting these pins.� There's not enough left protruding to grab with pliers and I'd rather not drill.

Thanks,
Paul
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Sully 77 Royale basket case. Future motorhome land speed record holder(bucket list) Seattle, Wa.

Previous Topic:	Is There Anything Better Than Hearing It Run For The First Time?
Next Topic:	[GMCnet] Onan Replacement

Goto Forum:

Current Time: Thu Oct 24 11:25:25 CDT 2024

Total time taken to generate the page: 0.00890 seconds