GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » CV and Ball Joints
CV and Ball Joints [message #160066] Sun, 12 February 2012 10:53 Go to previous message
waynefraser is currently offline  waynefraser   Canada
Messages: 38
Registered: December 2010
Location: Delta, BC
Karma:
Member

Time to start preparing the coach for summer. Inspected the CV Joints and found that 2 are seeping, and 1 is dry. I will be replacing the boots and any CV if needed. Also going to get the ball joints done at the same time as they have been loose for a while.

The question is... while the front end is apart, is there anything else I should do at the same tme?

Cheers


Wayne Fraser, 1973 Glacier 260, Ladner, BC
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] End of Windshield
Next Topic: [GMCnet] GMC Sub Frame
Goto Forum:
  


Current Time: Mon Oct 28 00:19:39 CDT 2024

Total time taken to generate the page: 0.01073 seconds