Re: [GMCnet] Rear suspension clarification [message #159735] |
Thu, 09 February 2012 14:28 |
Richard Brown
Messages: 281 Registered: May 2009
Karma:
|
Senior Member |
|
|
I can't say that rotating the bogey arm would help the lubrication much, but taking the strain off the bogey could help the bushing "float" around the pin allowing the grease to fully fill the void & ensuring better distribution while pushing out old grease & contaminants. When my dad greased farm implements, he always pumped in grease until clean grease came out, thereby flushing the wearing surfaces of any metal fragments. Grease is much cheaper than bushings & pins in my opinion.
Richard & Carol Brown
1974 Eleganza SE
"DILLIGAF"
Lindale, Tx. 75771
903-881-0192
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Richard & Carol Brown
1974 Eleganza SE
1174 Hickory Hills Dr.
Murchison, TX. 75778
|
|
|