GMCforum: GMCnet » [GMCnet] Fw: Intake Manifold Question

Home » Public Forums » GMCnet » [GMCnet] Fw: Intake Manifold Question

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Fw: Intake Manifold Question [message #158742]

Tue, 31 January 2012 14:57

ejuk8em

Messages: 90
Registered: July 2010

Karma:

Member

Hi all,
While in winter hibernation here in Illinois (although it has been over 50 degrees for the last couple of days) I pulled the carb off of The Stray Dog to have it rebuilt. I just spoke with the repair shop and they mentioned that the pre-heat� choke was packed full of carbon from the engine. They are suggesting that I pull the intake and check/replace the intake manifold heat tube, as it is likely damaged or rusted. Has anyone had this happen? If so, I could use a bit of instruction on what to look for and where to get this part. I'm also wondering if I need to be doing anything else while the intake is off. I've read the thread on blocking off the exhaust passenges and I think this would certainly be the time to do that.
Any suggestions would be appreciated.
Thanks,
Lyle

Lyle A. Rigdon, Retired�Superintendent
'73 Pineapple Yellow Sequoia - The Stray Dog
Pawnee, IL� 62558
Pawnee Pride - Live It!
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Fw: Intake Manifold Question By: ejuk8em on Tue, 31 January 2012 14:57
		Re: [GMCnet] Fw: Intake Manifold Question By: sgltrac on Tue, 31 January 2012 15:33
		Re: [GMCnet] Fw: Intake Manifold Question By: A Hamilto on Tue, 31 January 2012 15:38
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Tue, 31 January 2012 16:00
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Tue, 31 January 2012 17:02
		Re: [GMCnet] Fw: Intake Manifold Question By: Gary Worobec on Tue, 31 January 2012 18:21
		Re: [GMCnet] Fw: Intake Manifold Question By: jimk on Wed, 01 February 2012 00:32
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Burton on Wed, 01 February 2012 01:19
		Re: [GMCnet] Fw: Intake Manifold Question By: ejuk8em on Wed, 01 February 2012 10:01
		Re: [GMCnet] Fw: Intake Manifold Question By: Gary Worobec on Wed, 01 February 2012 10:16
		Re: [GMCnet] Fw: Intake Manifold Question By: Dennis S on Wed, 01 February 2012 11:22
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Burton on Wed, 01 February 2012 14:42
		Re: [GMCnet] Fw: Intake Manifold Question By: James Hupy on Wed, 01 February 2012 12:02
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Wed, 01 February 2012 16:29
		Re: [GMCnet] Fw: Intake Manifold Question By: ejuk8em on Thu, 02 February 2012 21:28
		Re: [GMCnet] Fw: Intake Manifold Question By: Dennis S on Thu, 02 February 2012 21:44
		Re: [GMCnet] Fw: Intake Manifold Question By: ejuk8em on Fri, 03 February 2012 15:51
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Thu, 02 February 2012 21:46
		Re: [GMCnet] Fw: Intake Manifold Question By: ejuk8em on Fri, 03 February 2012 15:57
		Re: [GMCnet] Fw: Intake Manifold Question By: Greg and April on Fri, 03 February 2012 16:05
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Fri, 03 February 2012 17:11
		Re: [GMCnet] Fw: Intake Manifold Question By: Greg and April on Fri, 03 February 2012 18:40
		Re: [GMCnet] Fw: Intake Manifold Question By: James Hupy on Fri, 03 February 2012 18:56
		Re: [GMCnet] Fw: Intake Manifold Question By: Matt Colie on Sat, 04 February 2012 08:25
		Re: [GMCnet] Fw: Intake Manifold Question By: Kosier on Sat, 04 February 2012 12:52
		Re: [GMCnet] Fw: Intake Manifold Question By: Matt Colie on Sat, 04 February 2012 14:13
		Re: [GMCnet] Fw: Intake Manifold Question By: rssbob on Sat, 04 February 2012 14:32
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Sat, 04 February 2012 17:02
		Re: [GMCnet] Fw: Intake Manifold Question By: Greg and April on Sat, 04 February 2012 17:58
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Sat, 04 February 2012 20:18
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Sat, 04 February 2012 20:36
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Sat, 04 February 2012 21:17
		Re: [GMCnet] Fw: Intake Manifold Question By: ggroth on Sun, 05 February 2012 19:33
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Sun, 05 February 2012 19:47
		Re: [GMCnet] Fw: Intake Manifold Question By: Greg and April on Sat, 04 February 2012 13:27
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Sat, 04 February 2012 17:01
		Re: [GMCnet] Fw: Intake Manifold Question By: gmcrv1 on Sun, 05 February 2012 08:41
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Sun, 05 February 2012 18:09
		Re: [GMCnet] Fw: Intake Manifold Question By: gmcrv1 on Wed, 08 February 2012 10:55
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Wed, 08 February 2012 17:10
		Re: [GMCnet] Fw: Intake Manifold Question By: Keith V on Wed, 08 February 2012 17:37
		Re: [GMCnet] Fw: Intake Manifold Question By: A Hamilto on Sun, 05 February 2012 19:23
		Re: [GMCnet] Fw: Intake Manifold Question By: k2gkk on Sun, 05 February 2012 21:27
		Re: [GMCnet] Fw: Intake Manifold Question By: emerystora on Fri, 03 February 2012 17:15
		Re: [GMCnet] Fw: Intake Manifold Question By: USAussie on Fri, 03 February 2012 17:54
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Burton on Thu, 02 February 2012 21:55
		Re: [GMCnet] Fw: Intake Manifold Question By: sgltrac on Wed, 01 February 2012 11:48
		Re: [GMCnet] Fw: Intake Manifold Question By: KB on Thu, 02 February 2012 21:49
		Re: [GMCnet] Fw: Intake Manifold Question By: Dennis S on Thu, 02 February 2012 22:01
		Re: [GMCnet] Fw: Intake Manifold Question By: James Hupy on Fri, 03 February 2012 10:57
		Re: [GMCnet] Fw: Intake Manifold Question By: KB on Fri, 03 February 2012 11:37
		Re: [GMCnet] Fw: Intake Manifold Question By: emerystora on Fri, 03 February 2012 11:58
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Fri, 03 February 2012 12:24
		Re: [GMCnet] Fw: Intake Manifold Question By: hnielsen2 on Fri, 03 February 2012 14:51
		Re: [GMCnet] Fw: Intake Manifold Question By: KB on Fri, 03 February 2012 12:35
		Re: [GMCnet] Fw: Intake Manifold Question By: James Hupy on Fri, 03 February 2012 12:50
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Fri, 03 February 2012 13:04
		Re: [GMCnet] Fw: Intake Manifold Question By: GeorgeRud on Fri, 03 February 2012 13:19
		Re: [GMCnet] Fw: Intake Manifold Question By: Ken Henderson on Fri, 03 February 2012 14:09
		Re: [GMCnet] Fw: Intake Manifold Question By: KB on Fri, 03 February 2012 16:27
		Re: [GMCnet] Fw: Intake Manifold Question By: rallymaster on Sun, 05 February 2012 00:26
		Re: [GMCnet] Fw: Intake Manifold Question By: Mr ERFisher on Sun, 05 February 2012 22:59

Previous Topic:	[GMCnet] Affect on alignment of rear ride height set too high
Next Topic:	[GMCnet] Ford Peels the Top Off the Mustang Shelby GT500 at Chicago

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Mar 31 01:39:37 CDT 2025

Total time taken to generate the page: 0.00858 seconds