Home » Public Forums » GMCnet » HF 20 Ton Low Profile Hydraulic Bottle Jack (New item for Harbor Freight)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 Re: [GMCnet] HF 20 Ton Low Profile Hydraulic Bottle Jack [message #158514 is a reply to message #158512] |
Sun, 29 January 2012 23:43   |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Rob,
While you're checking, have you verified that the jack will go under the
jack hook pad with a completely flat tire? Considering the possibility
that a blown tire may take out the air lines to the bags, it really should
be checked with the bags empty too.
Ken H.
On Sun, Jan 29, 2012 at 11:55 PM, Rob Mueller wrote:
> G'day,
>
> I have Cc'd JimK on this email so he can verify that both the bogie hooks
> he sells will work with the Torin jack he also sells. I'm
> sure he doesn't want to ship a setup to someone only to have them tell him
> it won't work!
>
> I am asking that because the OD of the Torin jack body is 3.76 inches.
>
> Therefore it is 1.88 inches from the center of the jack pad to the side of
> the body. Add an additional 0.5 inches and you get the
> distance from the side of the body to the "end" of the jack pad.
>
> Therefore for bogie hooks to work properly with the Torin jack in the full
> down position they must have a horizontal pad that is
> 2.38 from the vertical part. A - B.
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=42551
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=42552
>
> As noted in an earlier message I had to modify the ones I got from Terry
> Skinner to work.
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach |
|
|
|
| Re: [GMCnet] HF 20 Ton Low Profile Hydraulic Bottle Jack [message #158517 is a reply to message #158514] |
Mon, 30 January 2012 00:03 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Ken,
Nope!
Good points!
It would sure piss me off I had bought a bunch of tools only to find out that when I REALLY needed them the bloody things didn't
work!
We might save Kan-O-Tomatoes an a$$ chewin'! ;-)
I have a pair of Ford Jacks in Houston but no Torin's, I'll see what happens with the Ford jack and since it's an inch higher it
should work with the Torin's.
Regards,
Rob M.
-----Original Message-----
From: Ken Henderson
Rob,
While you're checking, have you verified that the jack will go under the jack hook pad with a completely flat tire? Considering the
possibility that a blown tire may take out the air lines to the bags, it really should be checked with the bags empty too.
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] HF 20 Ton Low Profile Hydraulic Bottle Jack [message #158556 is a reply to message #158514] |
Mon, 30 January 2012 09:30 |
Gary Berry
Messages: 1002
Registered: May 2005
Karma: -1
|
Senior Member |
|
|
Yep, when I had a blowout last year while passing through Salem,
OR, the debris took out the drivers side air line. The body went down
so far that I couldn't get my WalMart 4-ton jack under the Tom Warner
jack hook. I pulled out the original GMC jack and lifted the coach to
swap the tire. Also was lucky enough to be able to fix the air line.
Like Ken says, it's something to try before you hit the road.
On Sun, Jan 29, 2012 at 9:43 PM, Ken Henderson <hend4800@bellsouth.net> wrote:
> Rob,
>
> While you're checking, have you verified that the jack will go under the
> jack hook pad with a completely flat tire? �Considering the possibility
> that a blown tire may take out the air lines to the bags, it really should
> be checked with the bags empty too.
>
> Ken H.
>
--
Gary and Diana Berry
73 CL Stretch in Wa.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] HF 20 Ton Low Profile Hydraulic Bottle Jack [message #158601 is a reply to message #158556] |
Mon, 30 January 2012 15:02 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Gary,
Good information.
What are the measurements of your bottle jack and your Tom Warner jack hook.
Regards,
Rob M.
-----Original Message-----
From: Gary Berry
Yep, when I had a blowout last year while passing through Salem,
OR, the debris took out the drivers side air line. The body went down
so far that I couldn't get my WalMart 4-ton jack under the Tom Warner
jack hook. I pulled out the original GMC jack and lifted the coach to
swap the tire. Also was lucky enough to be able to fix the air line.
Like Ken says, it's something to try before you hit the road.
Gary
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] HF 20 Ton Low Profile Hydraulic Bottle Jack [message #158612 is a reply to message #158573] |
Mon, 30 January 2012 16:56 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mike,
Great!
What is the measurement from A to B?
Regards,
Rob M.
-----Original Message-----
From: Mike Miller
I have two of the hooks from JimK. (The black one in the first photo.) I also had to modify it to make it work with my jacks.
While it would lift the coach just fine, it had problems when lowering. The edge on the bottom, point "A" in the photo, would catch
on the top of the body of the jack. This same edge also tore off the fill plug on one of my jacks. I ground the edge at a 45
degree angle. I also ground down the bottom corners so they would be less likely to catch. I am careful now to place the fill plug
in the corner part of the hook so the plug and the hook do not rub.
I, like Rob, do not have pictures... but could take some if needed.
--
Mike
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] HF 20 Ton Low Profile Hydraulic Bottle Jack [message #158655 is a reply to message #158612] |
Mon, 30 January 2012 21:58 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
If nothing else, we back our jack with a 3year warrenty coverage.
Harbor Freight is only for a year.
We encourage customers to use it few times as the failier usually
happens the first coulle times.
On Mon, Jan 30, 2012 at 2:56 PM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Mike,
>
> Great!
>
> What is the measurement from A to B?
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Mike Miller
>
> I have two of the hooks from JimK. (The black one in the first photo.) I also had to modify it to make it work with my jacks.
>
> While it would lift the coach just fine, it had problems when lowering. The edge on the bottom, point "A" in the photo, would catch
> on the top of the body of the jack. This same edge also tore off the fill plug on one of my jacks. I ground the edge at a 45
> degree angle. I also ground down the bottom corners so they would be less likely to catch. I am careful now to place the fill plug
> in the corner part of the hook so the plug and the hook do not rub.
>
> I, like Rob, do not have pictures... but could take some if needed.
> --
> Mike
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Mon Apr 14 23:32:19 CDT 2025
Total time taken to generate the page: 0.04372 seconds
|
GMCforum
Search
Help
Register
Login
Home
