Home » Public Forums » GMCnet » [GMCnet] 1st Gear
[GMCnet] 1st Gear [message #158189] |
Fri, 27 January 2012 09:30 |
Gary Berry
Messages: 1002 Registered: May 2005
Karma: -1
|
Senior Member |
|
|
Hey All;
We've started out winter trip. Going to CA to visit the kids (and
more importantly the grandkids), then on to Pismo Beach for some sand
camping, then on to Quartzsite (I know, it will be late but Diana
REALLY wants to so some bead shopping), then on to Death Valley for a
buggy run, then head home. BUT, my transmission isn't shifting into
low after coming to a stop. I can manually shift it and it will go
into 1st gear. Otherwise it just takes off in 2nd geqr. The
transmission is topped off and the fluid is red and looks good. Any
ideas??? Thanks in advance...
--
Gary and Diana Berry
73 CL Stretch in Wa.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] 1st Gear [message #158212 is a reply to message #158189] |
Fri, 27 January 2012 14:39 |
Gary Casey
Messages: 448 Registered: September 2009
Karma: 0
|
Senior Member |
|
|
The return spring for the 1-2 shift valve is very light, so almost anything can make it hang up and not downshift. The two most probable are some dirt in the valve (valve body removal and cleaning) or sticking in the governor that prevents it from going to zero pressure. I'd start with the valve body first. You could try just manually selecting 1st for a while - you might get lucky and the dirt could work its way out. Regardless, I can't see where it is anything internal and expensive. Just to verify, I assume it does stay in 1st when you put it back in drive and then upshifts normally, right?
Gary
Hey All;
We've started out winter trip. Going to CA to visit the kids (and
more importantly the grandkids), then on to Pismo Beach for some sand
camping, then on to Quartzsite (I know, it will be late but Diana
REALLY wants to so some bead shopping), then on to Death Valley for a
buggy run, then head home. BUT, my transmission isn't shifting into
low after coming to a stop. I can manually shift it and it will go
into 1st gear. Otherwise it just takes off in 2nd geqr. The
transmission is topped off and the fluid is red and looks good. Any
ideas??? Thanks in advance...
--
Gary and Diana Berry
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] 1st Gear [message #158230 is a reply to message #158212] |
Fri, 27 January 2012 19:34 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I fought that issue on an internmittant basis for a couple of years. It would do it for a few thousand miles and then for the next 2000 to 3000 it would work OK.
I finally adjusted the modulator 1/2 turn (in I believe) as a guess. I have not seen the problem again.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: [GMCnet] 1st Gear [message #158238 is a reply to message #158189] |
Fri, 27 January 2012 21:00 |
shawnee
Messages: 422 Registered: February 2004 Location: NC
Karma: 0
|
Senior Member |
|
|
Gary Berry wrote on Fri, 27 January 2012 10:30 | Hey All;
We've started out winter trip. Going to CA to visit the kids (and
more importantly the grandkids), then on to Pismo Beach for some sand
camping, then on to Quartzsite (I know, it will be late but Diana
REALLY wants to so some bead shopping), then on to Death Valley for a
buggy run, then head home. BUT, my transmission isn't shifting into
low after coming to a stop. I can manually shift it and it will go
into 1st gear. Otherwise it just takes off in 2nd geqr. The
transmission is topped off and the fluid is red and looks good. Any
ideas??? Thanks in advance...
--
Gary and Diana Berry
73 CL Stretch in Wa.
|
Gary,
I had the same problem when I replaced the original transmission with a rebuilt one from Jasper. It would not go into first gear when stopped and was in second gear which was very slow and if on a grade would not move at all. I could get it into low gear manualy, then shift into drive after getting started and everything was OK. Jasper said it was impossible, but provided another transmission for me. The bad part was in less than 3,000 miles the new transmission self destructed on a grade and blew the hose off the vent and caused a fire. No more Jasper for me.
Gene Dotson
74 Canyonlands
www.bdub.net/Motorhome_Enhancements New Windows and Aluminum Radiators
|
|
|
|
Re: [GMCnet] 1st Gear [message #158293 is a reply to message #158189] |
Sat, 28 January 2012 08:42 |
gbarrow2
Messages: 765 Registered: February 2004 Location: Lake Almanor, Ca./ Red Bl...
Karma: 3
|
Senior Member |
|
|
Gary,
When you leave Corning have breakfast at Nancy's Airport Cafe in Willows ( across from WalMart just off the freeway). Or if your're later stop in Williams at Granzella's fo a sandwich and ice cream.
My transmission developed those symptoms on the way back from SOOR at Mapleton several years ago. A few months later the tranny failed completly and I had to get a new one from Manny.
Good luck.
Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach
|
|
|
|
Re: [GMCnet] 1st Gear [message #158300 is a reply to message #158298] |
Sat, 28 January 2012 09:59 |
mickeysss
Messages: 1476 Registered: January 2012
Karma: 0
|
Senior Member |
|
|
I got stuck in first gear the first day i drove it after manny put the new trans in for $1700, 3:50. I hope it does not do it any more.
it looks like the the plastic speedo drive gear could be bad from what i read here. Lets pray it is not. If it is how hard is it
to put a new one in, do i have to tow it 800 miles from la to manny. That thing looks plastic and made to break its teeth.
why would someone get stuck in first gear and not get out of it. This is it right. the plastic transmission governor gear, yellow like
plastic cam looking thing. How do i get this, i guess of course Jim in Freemont, but how do i get it in, miguel does not work on
transmissions. Maybe it will go away. right, wrong. ????
On Jan 28, 2012, at 7:45 AM, Gary Berry wrote:
> Hey Gene;
>
> Thanks for the tips on the eating places. Have never tried Nancy's.
> I'll see if Diana wants to stop (if she ever wakes up). Gransellas is
> a very nice place to eat.
>
> I've tried to get a transmission out of Manny for 3 years. He says
> as long as mine is working he's not going to sell me one. Maybe this
> time. I can only hope...
>
> On Sat, Jan 28, 2012 at 6:42 AM, gene barrow <barrowgene@gmail.com> wrote:
>>
>>
>> Gary,
>> When you leave Corning have breakfast at Nancy's Airport Cafe in Willows ( across from WalMart just off the freeway). Or if your're later stop in Williams at Granzella's fo a sandwich and ice cream.
>>
>> My transmission developed those symptoms on the way back from SOOR at Mapleton several years ago. A few months later the tranny failed completly and I had to get a new one from Manny.
>>
>> Good luck.
>> --
>> Gene Barrow
>
> --
> Gary and Diana Berry
> 73 CL Stretch in Wa.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: [GMCnet] 1st Gear [message #158649 is a reply to message #158300] |
Mon, 30 January 2012 21:32 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
If it is a governor gear, That is an easy replacement. If you can not do it yourself have Miguel call his buddy Jim K. or Manny for directions. I'm sure Manny or Jim will put one in the mail to you. I believe they are less than $5.00. Miguel replaced Dan Gregg's trans so he sure can install a governor gear in one.
I fail to understand the problem here. All three of these vendors will work to help you.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: [GMCnet] 1st Gear [message #158662 is a reply to message #158641] |
Mon, 30 January 2012 22:24 |
mickeysss
Messages: 1476 Registered: January 2012
Karma: 0
|
Senior Member |
|
|
It was a miracle that you could help me that day and i thank yo very much. I love you manny
for that, i will never forget that you came all the way down to do that while you were at that convention in San Deigo.
I am not bitching, I was just stating the case that it was great that you came when i bought it and it stuck in
first so close to MMGMC- broke about 4 mile from monte clair in first gear on the freeway and i drove it about
5 miles in first to get to monte clair. I was very lucky and i thank you. It was low on fluid from just being filled most likely.
I am very happy Miguel is still working on it etc. It if still does it when i pick it up i will let you know
and i do not expect you to come all the way down here for me. It is most likely that little plastic
yellowish gear thingy do hicky etc. But Manny i owe you more for what you did, please do not
get me wrong. I will always thank you for what you did. It is not your fault for sure what ever it is you
did the best i could hope for and i thank you. mickey :-) It is a good price thank you. If it happens when i
pick it up i will ask you what to do and have someone down here fix it. Miguel does not work on the tranny.
I have the greatest respect for your integrity and i am honored that you helped me. thank you for your integrity. Mickey
Let me thank you again, THANK YOU BIG TIME> mickey
I am talking about miles from miguel's i think that is what you are talkiing about space ship miles.
I drove it to miguels and it has been there ever since. it is there now. He has been working on it since on other stuff.
Bye the way hello! and thank you again manny. :-) say hello to your wife and family I only got to say hi at the star bucks
for about 10 minutes when i paid you. Thank you - thank you - thank you communicate with you later and i am A very happy
camper and honored to meet you thank you. M.
On Jan 30, 2012, at 7:07 PM, Manny Trovao wrote:
> You were a little low on fluid and it wouldn't let you shit.
> That amount for the tranny with power drive is a good deal and if it
> included installation it was a great deal.
> Anyway its not the same problem.
> Its the governor gear that if it breaks its impossible to remove if
> you have headers, The header has be be loosened.
> Its 500 miles from here to San Diego and you are over one hundred
> miles north of San Diego so it would be less than 400 miles from here.
> Yes, you can get the governor gear from Jim in Fremont or from me for
> $3.00 plus shipping.
> I guess you're talking space ship miles <G>
>
> --
> Manny Trovao
> mannystrans@gmail.com
> Manny's Trans / Power Drive
> San Jose, California
> 408-937-1583
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] 1st Gear [message #158665 is a reply to message #158662] |
Mon, 30 January 2012 22:46 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I believe that the problem is not the gear, but the governor.
Manny, please clarify.
Thanks,
On Mon, Jan 30, 2012 at 8:24 PM, mickey's space ship shuttle
<mickeysss@me.com> wrote:
>
> It was a miracle that you could help me that day and i thank yo very much. I love you manny
> for that, i will never forget that you came all the way down to do that while you were at that convention in San Deigo.
> I am not bitching, I was just stating the case that it was great that you came when i bought it and it stuck in
> first so close to MMGMC- broke about 4 mile from monte clair in first gear on the freeway and i drove it about
> 5 miles in first to get to monte clair. I was very lucky and i thank you. It was low on fluid from just being filled most likely.
> I am very happy Miguel is still working on it etc. It if still does it when i pick it up i will let you know
> and i do not expect you to come all the way down here for me. It is most likely that little plastic
> yellowish gear thingy do hicky etc. But Manny i owe you more for what you did, please do not
> get me wrong. I will always thank you for what you did. It is not your fault for sure what ever it is you
> did the best i could hope for and i thank you. mickey :-) It is a good price thank you. If it happens when i
> pick it up i will ask you what to do and have someone down here fix it. Miguel does not work on the tranny.
>
> I have the greatest respect for your integrity and i am honored that you helped me. thank you for your integrity. Mickey
>
> Let me thank you again, THANK YOU BIG TIME> mickey
>
> I am talking about miles from miguel's i think that is what you are talkiing about space ship miles.
>
> I drove it to miguels and it has been there ever since. it is there now. He has been working on it since on other stuff.
>
> Bye the way hello! and thank you again manny. :-) say hello to your wife and family I only got to say hi at the star bucks
> for about 10 minutes when i paid you. Thank you - thank you - thank you communicate with you later and i am A very happy
> camper and honored to meet you thank you. M.
>
> On Jan 30, 2012, at 7:07 PM, Manny Trovao wrote:
>
>> You were a little low on fluid and it wouldn't let you shit.
>> That amount for the tranny with power drive is a good deal and if it
>> included installation it was a great deal.
>> Anyway its not the same problem.
>> Its the governor gear that if it breaks its impossible to remove if
>> you have headers, The header has be be loosened.
>> Its 500 miles from here to San Diego and you are over one hundred
>> miles north of San Diego so it would be less than 400 miles from here.
>> Yes, you can get the governor gear from Jim in Fremont or from me for
>> $3.00 plus shipping.
>> I guess you're talking space ship miles <G>
>>
>> --
>> Manny Trovao
>> mannystrans@gmail.com
>> Manny's Trans / Power Drive
>> San Jose, California
>> 408-937-1583
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] 1st Gear [message #158666 is a reply to message #158649] |
Mon, 30 January 2012 22:50 |
mickeysss
Messages: 1476 Registered: January 2012
Karma: 0
|
Senior Member |
|
|
I think i ordered one already -
Transmission Govenor Gear - (A116)
I ordered it just in case already it is in the mail since friday or so from freemont.
I know manny is a tranny manny god and i believe in god. I would not let him
come down here for that, i would do it and happy to pay someone else to do it.
I was very lucky when i bought this Palm Beach the seller told me the transmission slipped.
I read around and found manny and called him about it. the seller was in San Diego which is
100 miles from me south east. I called manny and he stated that he had a transmission and that
he had to go to a convention in San Diego that same week end i was to buy it or so. He stated he
could change it for me with a new 3:50 ratio and on the way back stop at anaheim ca. and i pay him.
I think or i left the 1700 with the seller for him i can't remember now, but we gotter duune. Cable talk.
When i picked it up drove to miguel's for a brake booster was leaking. It stuck in first about 5 miles away
on the freeway behind a truck. But it may have been low on fluid, I have left there and been paying
miguel since fixing things, brake booster, change front windshield, steering box shaft replacement,
air bags now being done one blew in the parking lot, batteries are down now, getting er dune.
I thank them both for help ing get off the ground and look forward on picking it up when miguel
gets it all together for me. they above is what i ordered just in case. I am lucky for all this to happen
and i thank them both. I can't wait to get it going and move into it for the summer for my office
and home to just try it out that way and save rent for while and surf malibu this summer while i run my company.
I was lucky to run into these generals of the gmc and get help, let no one put asunder what the gmc has put together.
: those whom God hath joined together let no man put asunder.
On Jan 30, 2012, at 7:32 PM, Ken Burton wrote:
>
>
> If it is a governor gear, That is an easy replacement. If you can not do it yourself have Miguel call his buddy Jim K. or Manny for directions. I'm sure Manny or Jim will put one in the mail to you. I believe they are less than $5.00. Miguel replaced Dan Gregg's trans so he sure can install a governor gear in one.
>
> I fail to understand the problem here. All three of these vendors will work to help you.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] 1st Gear [message #158674 is a reply to message #158649] |
Tue, 31 January 2012 00:09 |
mickeysss
Messages: 1476 Registered: January 2012
Karma: 0
|
Senior Member |
|
|
they are all far away from anaheim where i am, miguel dosn't work on transmissions, I am not sure what is wrong with it any way.
I have not been able to drive it since i bought it from working and getting up to miguel's. It may just be low on fluid. It was
just put in new by manny and stuck in first on the way to miguels from san diego, it has been there about 2 months i think or so.
I will not get it till miguel gets the air bags replaced and drive it,, and see what happens. it has been parked since it was stuck in first gear.
We shall see if it happens again when i pick it up. thank you mickey - I talked with a guy that does my vans he is block from me.
He can do it if i need it done. we shall see. It is not a big deal. :-)
On Jan 30, 2012, at 7:32 PM, Ken Burton wrote:
>
>
> If it is a governor gear, That is an easy replacement. If you can not do it yourself have Miguel call his buddy Jim K. or Manny for directions. I'm sure Manny or Jim will put one in the mail to you. I believe they are less than $5.00. Miguel replaced Dan Gregg's trans so he sure can install a governor gear in one.
>
> I fail to understand the problem here. All three of these vendors will work to help you.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] 1st Gear [message #158683 is a reply to message #158189] |
Tue, 31 January 2012 07:11 |
Steven Ferguson
Messages: 3447 Registered: May 2006
Karma: 0
|
Senior Member |
|
|
Drove mine for 10 years that way with zero problems. Never thought you'd
get Diana back to the dust bowl again.
On Fri, Jan 27, 2012 at 8:30 AM, Gary Berry <duallycc@gmail.com> wrote:
> Hey All;
>
> We've started out winter trip. Going to CA to visit the kids (and
> more importantly the grandkids), then on to Pismo Beach for some sand
> camping, then on to Quartzsite (I know, it will be late but Diana
> REALLY wants to so some bead shopping), then on to Death Valley for a
> buggy run, then head home. BUT, my transmission isn't shifting into
> low after coming to a stop. I can manually shift it and it will go
> into 1st gear. Otherwise it just takes off in 2nd geqr. The
> transmission is topped off and the fluid is red and looks good. Any
> ideas??? Thanks in advance...
>
> --
> Gary and Diana Berry
> 73 CL Stretch in Wa.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Fathom the hypocrisy of a nation where every citizen must prove they have
health insurance......but not everyone has to prove they're a citizen.
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Re: [GMCnet] 1st Gear [message #158704 is a reply to message #158684] |
Tue, 31 January 2012 09:52 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
Steven Ferguson wrote on Tue, 31 January 2012 06:13 | Put some exlax in the tranny Gary.
On Mon, Jan 30, 2012 at 8:07 PM, Manny Trovao <mannystrans@gmail.com> wrote:
> You were a little low on fluid and it wouldn't let you shit.
> That amount for the tranny with power drive is a good deal and if it
> included installation it was a great deal.
> Anyway its not the same problem.
> Its the governor gear that if it breaks its impossible to remove if
> you have headers, The header has be be loosened.
> Its 500 miles from here to San Diego and you are over one hundred
> miles north of San Diego so it would be less than 400 miles from here.
> Yes, you can get the governor gear from Jim in Fremont or from me for
> $3.00 plus shipping.
> I guess you're talking space ship miles <G>
>
> --
> Manny Trovao
> mannystrans@gmail.com
> Manny's Trans / Power Drive
> San Jose, California
> 408-937-1583
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Fathom the hypocrisy of a nation where every citizen must prove they have
health insurance......but not everyone has to prove they're a citizen.
Steve Ferguson
Sierra Vista, AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Yup! It's always good to stay hydrated. Helps ward off constipation!
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
Re: [GMCnet] 1st Gear [message #158727 is a reply to message #158189] |
Tue, 31 January 2012 12:00 |
KB
Messages: 1262 Registered: September 2009
Karma: 0
|
Senior Member |
|
|
> If it is a governor gear, That is an easy replacement. If you can not do it yourself have Miguel call his buddy Jim K. or Manny for directions. I'm sure Manny or Jim will put one in the mail to you. I believe they are less than $5.00. Miguel replaced Dan Gregg's trans so he sure can install a governor gear in one.
JimK charges $24 for them, plus tax/shipping:
http://www.appliedgmc.com/prod.itml/icOid/721
Karen
1973 23'
1975 26'
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Karen
1975 26'
San Jose, CA
|
|
|
Re: [GMCnet] 1st Gear [message #158738 is a reply to message #158727] |
Tue, 31 January 2012 14:07 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
KB wrote on Tue, 31 January 2012 12:00 | > If it is a governor gear, That is an easy replacement. If you can not do it yourself have Miguel call his buddy Jim K. or Manny for directions. I'm sure Manny or Jim will put one in the mail to you. I believe they are less than $5.00. Miguel replaced Dan Gregg's trans so he sure can install a governor gear in one.
JimK charges $24 for them, plus tax/shipping:
http://www.appliedgmc.com/prod.itml/icOid/721
Karen
1973 23'
1975 26'
|
Looks like the price went up. I should have invested in Governor Gears instead of the Stock Market.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Goto Forum:
Current Time: Sun Oct 27 23:15:42 CDT 2024
Total time taken to generate the page: 0.02452 seconds
|