| [GMCnet] Wheel Bearing Tool [message #158076] |
Thu, 26 January 2012 10:43  |
lgarland1
Messages: 11
Registered: December 2004
Karma: 0
|
Junior Member |
|
|
I am at the age where I have entered a 'get rid of stuff' mode so that
my kids won't have to deal with it at some point in the future. I have
a complete Tom Warner front wheel bearing tool kit which includes the
split collar, inserts for pulling and reinstalling the bearing, and the
OTC 927 puller. I added an 8-point socket to allow use of a ratchet
wrench or breaker bar (half inch drive) to drive the forcing screw and
Chris$ provided a very nice case for the whole kit.
I was going to list this on e-bay but decided to offer the kit to
members of this mailing list first. I believe I paid Tom $200 for the
kit back in 1999 and I would like to get at least that amount for it. I
would prefer local pickup since this thing is heavy and with the case it
is fairly large and I hate packing up stuff for shipping. But, if
necessary, I could get it ready and ship it (I have no idea what
shipping cost would be -- probably over $20).
Please let me know if you are interested.
Leland (Lee) Garland
Phoenix (Ahwatukee) AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Wheel Bearing Tool [message #158086 is a reply to message #158076] |
Thu, 26 January 2012 11:33  |
 |
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| lgarland1 wrote on Thu, 26 January 2012 08:43 |
I am at the age where I have entered a 'get rid of stuff' mode so that
my kids won't have to deal with it at some point in the future. I have
a complete Tom Warner front wheel bearing tool kit which includes the
split collar, inserts for pulling and reinstalling the bearing, and the
OTC 927 puller. I added an 8-point socket to allow use of a ratchet
wrench or breaker bar (half inch drive) to drive the forcing screw and
Chris$ provided a very nice case for the whole kit.
I was going to list this on e-bay but decided to offer the kit to
members of this mailing list first. I believe I paid Tom $200 for the
kit back in 1999 and I would like to get at least that amount for it. I
would prefer local pickup since this thing is heavy and with the case it
is fairly large and I hate packing up stuff for shipping. But, if
necessary, I could get it ready and ship it (I have no idea what
shipping cost would be -- probably over $20).
Please let me know if you are interested.
|
If you still have it when I am down there (just over a month) I would like to buy it. I do not want to get into a bidding war though....
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
| Re: [GMCnet] Wheel Bearing Tool [message #158107 is a reply to message #158076] |
Thu, 26 January 2012 16:21 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Lee,
If you paid $200 for it in 1999 it considering inflation and the interest you could have earned if it was money in the bank I reckon
you're basically giving it away!
The last one went for $425 on eBay!
Regards,
Rob M.
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Leland L Garland
Sent: Friday, 27 January 2012 3:44 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Wheel Bearing Tool
I am at the age where I have entered a 'get rid of stuff' mode so that
my kids won't have to deal with it at some point in the future. I have
a complete Tom Warner front wheel bearing tool kit which includes the
split collar, inserts for pulling and reinstalling the bearing, and the
OTC 927 puller. I added an 8-point socket to allow use of a ratchet
wrench or breaker bar (half inch drive) to drive the forcing screw and
Chris$ provided a very nice case for the whole kit.
I was going to list this on e-bay but decided to offer the kit to
members of this mailing list first. I believe I paid Tom $200 for the
kit back in 1999 and I would like to get at least that amount for it. I
would prefer local pickup since this thing is heavy and with the case it
is fairly large and I hate packing up stuff for shipping. But, if
necessary, I could get it ready and ship it (I have no idea what
shipping cost would be -- probably over $20).
Please let me know if you are interested.
Leland (Lee) Garland
Phoenix (Ahwatukee) AZ
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Wheel Bearing Tool [message #158528 is a reply to message #158107] |
Mon, 30 January 2012 02:31 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
The $200 tool is not the same as the $400plus unit.
You'll see the two on our site.
On Thu, Jan 26, 2012 at 2:21 PM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Lee,
>
> If you paid $200 for it in 1999 it considering inflation and the interest you could have earned if it was money in the bank I reckon
> you're basically giving it away!
>
> The last one went for $425 on eBay!
>
> Regards,
> Rob M.
>
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Leland L Garland
> Sent: Friday, 27 January 2012 3:44 AM
> To: gmclist@temp.gmcnet.org
> Subject: [GMCnet] Wheel Bearing Tool
>
>
>
> I am at the age where I have entered a 'get rid of stuff' mode so that
> my kids won't have to deal with it at some point in the future. Â I have
> a complete Tom Warner front wheel bearing tool kit which includes the
> split collar, inserts for pulling and reinstalling the bearing, and the
> OTC 927 puller. Â I added an 8-point socket to allow use of a ratchet
> wrench or breaker bar (half inch drive) to drive the forcing screw and
> Chris$ provided a very nice case for the whole kit.
>
> I was going to list this on e-bay but decided to offer the kit to
> members of this mailing list first. Â I believe I paid Tom $200 for the
> kit back in 1999 and I would like to get at least that amount for it. Â I
> would prefer local pickup since this thing is heavy and with the case it
> is fairly large and I hate packing up stuff for shipping. But, if
> necessary, I could get it ready and ship it (I have no idea what
> shipping cost would be -- probably over $20).
>
> Please let me know if you are interested.
>
> Leland (Lee) Garland
> Phoenix (Ahwatukee) AZ
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
