GMCforum: GMCnet » Bearing Tool

Home » Public Forums » GMCnet » Bearing Tool

Show: Today's Messages :: Polls :: Message Navigator

Bearing Tool [message #156094]

Mon, 09 January 2012 15:55

biggreen

Messages: 347
Registered: June 2011
Location: Northeast Florida

Karma: 1

Senior Member

Have seen various tools and pullers to remove the front bearings on our GMC's. Just missed one on ebay.
I've seen other front drive bearing tool kits, and wonder why they would not work.
I realize the difference in our setup and that of a say Honda, but what about the larger 4wd vehicles of today.
Anyone run across anything that would work and does not cost #700. ?
Thanks.

Report message to a moderator

Re: [GMCnet] Bearing Tool [message #156095 is a reply to message #156094]

Mon, 09 January 2012 16:09

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

RD,

AFAIK the only bearing tool that works is one specifically designed for the Toronado / Eldorado / GMC.

I reckon as the numbers of 1 ton front ends proliferate the number of second hand bearing tools on the market will increase.

The one on eBay went for $425 which is a fair piece of change that you can recoup if you have a tool and then install a 1 ton.

Also Charles Wersal down (or should I say up?) in Texas had made some he was selling but I don't remember the price.

Regards,
Rob M.
�

-----Original Message-----
From: R.D. Hart

Have seen various tools and pullers to remove the front bearings on our GMC's. Just missed one on ebay.
I've seen other front drive bearing tool kits, and wonder why they would not work.
I realize the difference in our setup and that of a say Honda, but what about the larger 4wd vehicles of today.
Anyone run across anything that would work and does not cost #700. ?
Thanks.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] Bearing Tool [message #156098 is a reply to message #156094]

Mon, 09 January 2012 16:15

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

and it may just be cheaper to change to a one ton front end with all new
parts ;>)

http://gmcmotorhome.info/front.html

gene

On Mon, Jan 9, 2012 at 1:55 PM, R.D. Hart <regor5556@yahoo.com> wrote:

>
>
> Have seen various tools and pullers to remove the front bearings on our
> GMC's. Just missed one on ebay.
> I've seen other front drive bearing tool kits, and wonder why they would
> not work.
> I realize the difference in our setup and that of a say Honda, but what
> about the larger 4wd vehicles of today.
> Anyone run across anything that would work and does not cost #700. ?
> Thanks.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Bearing Tool [message #156110 is a reply to message #156094]

Mon, 09 January 2012 17:08

jade

Messages: 163
Registered: August 2009

Karma: 0

Senior Member

Check with Dave Lenzi on his method as he doesn't use a bearing puller.
Could save you a bundle.
JADE
73 23' ?? 73 26' Painted Desert
Ajo, AZ
KC7QGC
----- Original Message -----
From: "R.D.Hart" <regor5556@yahoo.com>
To: <gmclist@temp.gmcnet.org>
Sent: Monday, January 09, 2012 2:55 PM
Subject: [GMCnet] Bearing Tool

>
>
> Have seen various tools and pullers to remove the front bearings on our
> GMC's. Just missed one on ebay.
> I've seen other front drive bearing tool kits, and wonder why they would
> not work.
> I realize the difference in our setup and that of a say Honda, but what
> about the larger 4wd vehicles of today.
> Anyone run across anything that would work and does not cost #700. ?
> Thanks.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Bearing Tool [message #156123 is a reply to message #156094]

Mon, 09 January 2012 18:22

Jim Galbavy

Messages: 1443
Registered: August 2007

Karma: 7

Senior Member

Depends on where you are. If you were in the central Atlantic area and were a member of the GMC Tidewater Crabs, the club would offer to loan you the club's tool set.

jim galbavy
prez, GMCTWC
'73 x-CL ANNIE
Lake Mary, Fl

Report message to a moderator

Re: Bearing Tool [message #156165 is a reply to message #156094]

Mon, 09 January 2012 21:37

biggreen

Messages: 347
Registered: June 2011
Location: Northeast Florida

Karma: 1

Senior Member

Are these sets still available?

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5891

I dont need to rent one, I'd just like one for my toolbox.
Need to change my rotors soon.

Report message to a moderator

Re: [GMCnet] Bearing Tool [message #156168 is a reply to message #156165]

Mon, 09 January 2012 21:50

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

RD,

I believe this tool set is made by Charles Wersal.

I've BCC'd him on this email and if I am correct I trust he will respond.

Regards,
Rob M.

-----Original Message-----
From: Of R.D. Hart

Are these sets still available?

http://www.gmcmhphotos.com/photos/showgallery.php?cat=5891

I dont need to rent one, I'd just like one for my toolbox.
Need to change my rotors soon.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: Bearing Tool [message #156172 is a reply to message #156123]

Mon, 09 January 2012 23:19

Charles

Messages: 455
Registered: January 2004

Karma: 0

Senior Member

I still have a few of the bearing pullers available.
Price is $350.00 + 10.95 USPS priority shipping. If
interested please Email me direct gcw13@sbcglobal.net
Charles

Report message to a moderator

Previous Topic:	rear camera - keep front rear view mirror ???
Next Topic:	Ramco mirrors. fit ????

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 10:27:54 CDT 2024

Total time taken to generate the page: 0.01494 seconds