GMCforum: GMCnet » Recirculating toilet: valve clearance issue

Home » Public Forums » GMCnet » Recirculating toilet: valve clearance issue

Show: Today's Messages :: Polls :: Message Navigator

Recirculating toilet: valve clearance issue [message #155415]

Wed, 04 January 2012 16:44

Duce Apocalypse

Messages: 824
Registered: May 2009
Location: Los angeles

Karma:

Senior Member

Well i replaced my sliding valve on my recirc toilet because the old one was sticking and leaking. The new one i got from thetford bolted right up but now it doesnt sit in the flange on the floor. Its about a half inch too tall. The new valve seems to be a bit taller than the old and is made entirely of plastic where as the old had a metal backing. I was wondering if anyone else ever encountered this issue and what did they do to corect it?

PS happy new year every body!

73 Canyon Lands, (a.k.a. The Yellow Submarine) West Los Angeles CA

Report message to a moderator

[Message index]

		Recirculating toilet: valve clearance issue By: Duce Apocalypse on Wed, 04 January 2012 16:44
		Re: Recirculating toilet: valve clearance issue By: Dennis S on Wed, 04 January 2012 21:51
		Re: Recirculating toilet: valve clearance issue By: gbarrow2 on Wed, 04 January 2012 22:08
		Re: Recirculating toilet: valve clearance issue By: Duce Apocalypse on Wed, 04 January 2012 22:53
		Re: [GMCnet] Recirculating toilet: valve clearance issue By: Steven Ferguson on Thu, 05 January 2012 06:15
		Re: [GMCnet] Recirculating toilet: valve clearance issue By: Duce Apocalypse on Thu, 05 January 2012 12:30

Previous Topic:	Re: [GMCnet] GmTrans temp
Next Topic:	Wheel size ( was Relocating a 76 Eleganza )

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 16:22:00 CDT 2024

Total time taken to generate the page: 0.00904 seconds