GMCforum: GMCnet » charcoal cannister

Home » Public Forums » GMCnet » charcoal cannister

Show: Today's Messages :: Polls :: Message Navigator

charcoal cannister [message #152637]

Mon, 12 December 2011 09:53

skip2

Messages: 544
Registered: September 2011
Location: Winter Haven,FL (center o...

Karma:

Senior Member

After overfilling my tank and parking nose down I noticed while figuring out my leak that the port to the carb on my charcoal cannister was not hooked to anything. Best I can tell it should be hooked to the same port as the PCV valve. The stock qjet and manifold have manifold have been changed out to and edelbrock qjet and high rise manifold there is a 4" riser on my motor cover. Yes I already orderd a new fuel vapor seperator fron Sirum. Thanks in advanced
Skip

74 Canyon Lands, FiTech, 3.7 FD LSD, Manny Tranny, Springfield Distributor, 2001 Chevy Tracker Ragtop Towd

Report message to a moderator

[Message index]

		charcoal cannister By: skip2 on Mon, 12 December 2011 09:53
		Re: charcoal cannister By: Bob de Kruyff on Mon, 12 December 2011 10:59
		Re: charcoal cannister By: JohnL455 on Mon, 12 December 2011 12:20
		[GMCnet] charcoal cannister By: storm'n on Mon, 12 December 2011 12:56

Previous Topic:	Fry's Fuel
Next Topic:	Re: [GMCnet] Engine cover rubber seal

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 05:32:46 CDT 2024

Total time taken to generate the page: 0.05706 seconds