Home » Public Forums » GMCnet » [GMCnet] Portable Industrial Endoscope
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152155 is a reply to message #152154] |
Thu, 08 December 2011 10:46   |
George Beckman
Messages: 1085
Registered: October 2008
Location: Colfax, CA
Karma: 11
|
Senior Member |
|
|
| emerystora wrote on Thu, 08 December 2011 08:39 |
For the GMCer that has everything!
This is not for your body but it looks great for looking into those small spaces on your engine, etc.
Free shipping.
|
I want one! I want to look at my intake manifold to see if it is sealing.
'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152156 is a reply to message #152155] |
Thu, 08 December 2011 10:49 |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
I've got one of these:
http://www.northerntool.com/shop/tools/product_200367474_200367474
Didn't pay that for it.... but none the less the camera head a pretty big and makes it problematic.
That's when I call the neighbor who sells medical equipment.....
Dolph
On Dec 8, 2011, at 11:46 AM, George Beckman wrote:
>
>
> emerystora wrote on Thu, 08 December 2011 08:39
>> For the GMCer that has everything!
>> This is not for your body but it looks great for looking into those small spaces on your engine, etc.
>>
>> Free shipping.
>
>
> I want one! I want to look at my intake manifold to see if it is sealing.
> --
> '74 Eleganza, SE, Howell + EBL
> Best Wishes,
> George
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152157 is a reply to message #152155] |
Thu, 08 December 2011 11:11 |
Mike O'Connell
Messages: 53
Registered: November 2008
Location: Deerfield MA
Karma: 0
|
Member |
|
|
These things can be useful from time to time. I discovered that one of the screws holding on my choke plate was missing. I have a friend in the defense industry who had access to one of these things and we poked around all the intake ports looking for it. We never did find it but I assume the PO had lost it somewhere else.
Mike O'Connell
Deerfield, MA
'75 Eleganza
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152159 is a reply to message #152157] |
Thu, 08 December 2011 11:16 |
mlincoln
Messages: 107
Registered: August 2006
Location: Salt Lake City
Karma: 0
|
Senior Member |
|
|
Remember, a pint of mag sulfate orally and plenty of clear liquids for 24
hours before attempting use internally! As in painting, prep is everything
for endoscopy. ;-)
Mike Lincoln (MD)
1978 GMC Royale Center Kitchen
2009 GMC Acadia
On Thu, Dec 8, 2011 at 10:11 AM, Mike O'Connell <moconnell2000@yahoo.com>wrote:
>
>
> These things can be useful from time to time. I discovered that one of the
> screws holding on my choke plate was missing. I have a friend in the
> defense industry who had access to one of these things and we poked around
> all the intake ports looking for it. We never did find it but I assume the
> PO had lost it somewhere else.
> --
> Mike O'Connell
> Deerfield, MA
> '75 Eleganza
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael J. Lincoln MD, FACMI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Mike
|
|
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152164 is a reply to message #152155] |
Thu, 08 December 2011 12:55 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Unbelievable prices.....wasn't that long ago these things were $10,000 !
Ray
Ray & Lisa Erspamer
78 Royale "Great Lakes Eagle"
Center Kitchen TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
----- Original Message ----
From: George Beckman <gbeckman@pggp.com>
To: gmclist@temp.gmcnet.org
Sent: Thu, December 8, 2011 10:46:33 AM
Subject: Re: [GMCnet] Portable Industrial Endoscope
emerystora wrote on Thu, 08 December 2011 08:39
> For the GMCer that has everything!
> This is not for your body but it looks great for looking into those small
>spaces on your engine, etc.
>
> Free shipping.
I want one! I want to look at my intake manifold to see if it is sealing.
--
'74 Eleganza, SE, Howell + EBL
Best Wishes,
George
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152175 is a reply to message #152173] |
Thu, 08 December 2011 15:45 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
I'd love to find one with a 40' tube, maybe I could figure why my homes sewer
line is always plugging up. I talked to several pluming firms and they want
big $$$ to scope it.
Ray
Ray & Lisa Erspamer
78 Royale "Great Lakes Eagle"
Center Kitchen TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
----- Original Message ----
From: Bruce Hislop <bruce@perthcomm.com>
To: gmclist@temp.gmcnet.org
Sent: Thu, December 8, 2011 3:14:23 PM
Subject: Re: [GMCnet] Portable Industrial Endoscope
I bought one for the shop. Handy thing to see in and around stuff, fishing wires
etc.
Not to easy to see in the bright sunlight though, and watch you don't get the
borescope camera caught between stuff, else you'll be still taking stuff apart
to get it out!
Great tool!
--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
Hubler 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152188 is a reply to message #152180] |
Thu, 08 December 2011 17:32 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Well, I get the 'up periscope' test every five years on advice (family history of colorectal cancer). Lst trip through, the GI gent was harassing the practice nurse over preps, "He better be so clean I could have my lunch in there...". I was gonna comment, but he turned the Fentanyl up and I left the room rapidly.
--johnny
'76 23' Transmode
'76 palm beach
'44 a- oh nevermind
________________________________
From: Rob Mueller <robmueller@iinet.net.au>
To: gmclist@temp.gmcnet.org
Sent: Thursday, December 8, 2011 5:49 PM
Subject: Re: [GMCnet] Portable Industrial Endoscope
Mike,
Thanks for the laugh!
I've gone through a number of "bore-o-scopings" and the prep ain't fun! ;-)
Regards,
Rob M.
-----Original Message-----
From: Michael Lincoln
Remember, a pint of mag sulfate orally and plenty of clear liquids for 24
hours before attempting use internally! As in painting, prep is everything
for endoscopy. ;-)
Mike Lincoln (MD)
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152191 is a reply to message #152175] |
Thu, 08 December 2011 18:10 |
|
|
Ray, the one I have from Harbor Freight is the same as a lot
of them. I found extra flex arms for it from MCM Electonics,
I bought 2, so mine will go out a little over 5 ft now.
On 12/8/2011 1:45 PM, Ray Erspamer wrote:
> I'd love to find one with a 40' tube, maybe I could figure why my homes sewer
> line is always plugging up. I talked to several pluming firms and they want
> big $$$ to scope it.
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Terry Taylor
'74 ex-Eleganza SE
San Lorenzo, CA
http://www.n6mon.org
http://dldesignstore.com
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152194 is a reply to message #152191] |
Thu, 08 December 2011 18:49 |
Gary Worobec
Messages: 867
Registered: May 2005
Karma: -1
|
Senior Member |
|
|
Terry, My goodness with a 5 ft. length you are not considering a
do-it-yourself colonoscopy are you :) I know GMC'ers like to save a bit of
money but that might be going way too far.
Thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
----- Original Message -----
From: "Terry Taylor" <n6mon@pacbell.net>
To: <gmclist@temp.gmcnet.org>
Sent: Thursday, December 08, 2011 4:10 PM
Subject: Re: [GMCnet] Portable Industrial Endoscope
> Ray, the one I have from Harbor Freight is the same as a lot
> of them. I found extra flex arms for it from MCM Electonics,
> I bought 2, so mine will go out a little over 5 ft now.
>
>
> On 12/8/2011 1:45 PM, Ray Erspamer wrote:
>> I'd love to find one with a 40' tube, maybe I could figure why my homes
>> sewer
>> line is always plugging up. I talked to several pluming firms and they
>> want
>> big $$$ to scope it.
>>
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152206 is a reply to message #152194] |
Thu, 08 December 2011 19:51 |
|
|
That hurt, just thinking about it!
On 12/8/2011 4:49 PM, Gary Worobec wrote:
> Terry, My goodness with a 5 ft. length you are not considering a
> do-it-yourself colonoscopy are you :) I know GMC'ers like to save a bit of
> money but that might be going way too far.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Terry Taylor
'74 ex-Eleganza SE
San Lorenzo, CA
http://www.n6mon.org
http://dldesignstore.com
|
|
|
|
| Re: [GMCnet] Portable Industrial Endoscope [message #152212 is a reply to message #152194] |
Thu, 08 December 2011 20:47 |
 |
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
| Gary Worobec wrote on Thu, 08 December 2011 16:49 |
Terry, My goodness with a 5 ft. length you are not considering a
do-it-yourself colonoscopy are you  I know GMC'ers like to save a bit of
money but that might be going way too far.
----- Original Message -----
From: "Terry Taylor" <n6mon@pacbell.net>
Subject: Re: [GMCnet] Portable Industrial Endoscope
> ... I found extra flex arms for it from MCM Electonics,
> I bought 2, so mine will go out a little over 5 ft now.
>
|
Lately I haven't had time to read all of the threads so I have to pick and choose where to spend the time...
... I should have stopped spending time on this thread before I made it to this post.
<GRIN>
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
Goto Forum:
Current Time: Sun Mar 30 23:14:06 CDT 2025
Total time taken to generate the page: 0.05908 seconds
|
GMCforum
Search
Help
Register
Login
Home
