GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMC Swap Meet » WTB, passenger fender (Section on Passenger fender)
WTB, passenger fender [message #152032] Wed, 07 December 2011 08:37 Go to next message
MikeT   United States
Messages: 225
Registered: November 2009
Location: Marine City, Michigan
Karma: 0
Senior Member
Does anyone have a true parts coach they are willing to cut an 18" section off the passenger fender and sell.

Attached is a picture of the area I need. Thinking it would be easier to repair with the piece then repair without.

Thanks

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41746&title=dscn2017&cat=500


Mike Thomas Marine City, MI 77 ex Palm Beach

[Updated on: Wed, 07 December 2011 08:49]

Report message to a moderator

Re: WTB, passenger fender [message #152057 is a reply to message #152032] Wed, 07 December 2011 12:22 Go to previous messageGo to next message
Craig Lechowicz is currently offline  Craig Lechowicz   United States
Messages: 541
Registered: October 2006
Location: Waterford, MI
Karma: 0
Senior Member
Mike,
I think the coach over in St. Johns that Mike Lincoln sold me the front clip from might have that part. I'm not sure if it's still there or not. Somewhere I have a phone # for him, and for George, the guy at the lot in St. Johns where it's located. You might try & pm Mike, but I haven't seen him on the board lately. You can pm or call me, and I can root around for phone numbers. Not sure if you want to drive all the way out to St. Johns to get it or not, probably depends on what else pops up.


Craig Lechowicz
'77 Kingsley, Waterford, MI
Re: WTB, passenger fender [message #152096 is a reply to message #152032] Wed, 07 December 2011 19:08 Go to previous messageGo to next message
roy1 is currently offline  roy1   United States
Messages: 2126
Registered: July 2004
Location: Minden nevada
Karma: 6
Senior Member
If you can get that section of the fender it would make it a little easier to repair. If not some resin and fiberglass cloth will get the job done. You would need to do several layers and some shaping and sanding to get it to the proper shape but it is doable.


Roy Keen Minden,NV 76 X Glenbrook
Re: WTB, passenger fender [message #152246 is a reply to message #152032] Fri, 09 December 2011 06:31 Go to previous message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
Senior Member
MikeT wrote on Wed, 07 December 2011 06:37

Does anyone have a true parts coach they are willing to cut an 18" section off the passenger fender and sell.

Attached is a picture of the area I need. Thinking it would be easier to repair with the piece then repair without.

Thanks

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41746&title=dscn2017&cat=500


<http://gmc.dwinchester.com/>
see "Restoration of the Yellow Submarine"


Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com
Previous Topic: Bill Bs ebay listings for Dec.07 thru 17th.
Next Topic: 16" steel wheels
Goto Forum:
  


Current Time: Wed Oct 23 11:16:44 CDT 2024

Total time taken to generate the page: 0.01180 seconds