Roller Cam issue - please read if you have one. [message #150590] |
Thu, 24 November 2011 11:01 |
|
Matt Colie
Messages: 8547 Registered: March 2007 Location: S.E. Michigan
Karma:
|
Senior Member |
|
|
To all GMC people with roller follower cams, please be aware of this issue.
An owner has had a recent issue with an engine built and installed last year.
The engine was built with a Competition Cams 42-413-9 Roller cam kit.
It wore out the distributor drive gear in about six thousand miles. In a query to Competition Cams, he found out that they only expect five thousand miles of life from the bronze distributor drive gear.
If you have a Comp Cams Roller, carry a distributor drive gear and the tools to replace or a back-up distributor and plan to replace this gear on a regular basis.
Unfortunately, this owner only works the GMC-EFI group.
More information will be available as more is learned.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|