Home » Public Forums » GMCnet » My project Coach
My project Coach [message #150109] |
Sat, 19 November 2011 10:58 |
davidlive
Messages: 143 Registered: November 2011 Location: Simi valley, Southern Cal...
Karma: -1
|
Senior Member |
|
|
Hello Everyone, i'm new to the forums and the gmc motorhome, i recently acquired one (couple months ago) it's a 1974 26's painted desert model.
I researched and fell in love with the design of these.
I wanted a project coach that i will have to rebuild from the ground up, this will probably take me years to do as it's simply in a rv storage place atm while i tear out the interior and look for a better place to work on it.
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome5.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome6.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome8.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome7.jpg
I've already started ripping out the interior which was original and in very bad condition, i forgot to take before pictures and only have the two the seller had
Before
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome9.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome10.jpg
During
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0151.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0152.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0153.jpg
I'm still working on ripping more of the interior out, i've got the shower and heater out sense those pictures.
I just wanted to make this thread as a way to track what i'm doing and ideals and hear from others what they think, this again is a project that i figure will take me years to complete lol
Some upgrade Ideals i have
though the bumper hitch (i plan on possibly towing a 22-26' enclosed trailer)
max brake system
rims and tires (last thing i do as the current tires are new)
Air bad system
brake system (disc, electric power booster)
reaction bar
Headlights, taillights, clearance lights (LED)
Tank-less water heater (propane / Electric)
Custom lighting (led)
Microwave mounted about stove
Custom Dashboard
New windows
replace all appliances
Redo all plumbing and electrical wiring (romex wiring and soft copper w/compression fittings plumbing)
install a Macerator
rear wheel wells replaced
floorboard replaced
repair lower door hinge or replace door
Current ideal floor plan
David
78 Royal #749
74 #136
Oversteer is when you hit the wall with the rear of the car, understeer is when you hit the wall with the front of the car. Hp is how fast you hit the wall, and torque is how far you take the wall with you when you hit it.
[Updated on: Thu, 17 December 2015 19:58] Report message to a moderator
|
|
|
Re: [GMCnet] My project Coach [message #150119 is a reply to message #150109] |
Sat, 19 November 2011 13:11 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
David,
Where do you live?
On ise the frame for larger tanks / batteries (rougly 3")
> Headlights, taillights, clearance lights (LED)
> Central Vacuum system
> Tank-less water heater (propane / 120v)
> Custom lighting
> Microwave mounted about stove
> flip up tv mounted over passenger seat
> Light on retractable cord mounted in refrigerator maintenance door
> Custom Dashboard
> New windows
> Ev conversion (electric motors)
> Solar panels (remove rear ladder)
> Place generator in front (where the radiator would had been)
> replace all appliances
> Redo all plumbing and electrical wiring (romex wiring and hard copper plumbing)
> Remove dashboard a/c and heater (due to ev conversion)
> Remove 2nd gas tank leave 1 tank (for generator to use dual fuel sources gas/propane)
>
>
>
> Current ideal floor plan
>
>
> -----------------------------
> | Â possible propane tank
> |----------------------------
> | Â Â Â Â Water Tank
> | Â Â Â Â Queen Bed
> | Water  ---------
> | Heater | Drawers |
> |----------------------------
> | Â Toliet|
> |
> |
> | Shower       Closet
> |
> |
> |--------
> |
> | Refrig       Stove/Microwave
> |
> |
> |----
> |
> |Door         Sink / Heater
> |
> |
> |----
> |
> |
> |
> | Desk        Couch
> |
> |
> |
> |------------------------
> |
> |
> |
> |
> | Â TV Â Â Â Â Â Â Â Â Drivers seat
> |
> |
> -------------------------
>
>
>
>
> David
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] My project Coach [message #150121 is a reply to message #150109] |
Sat, 19 November 2011 14:31 |
|
ljdavick
Messages: 3548 Registered: March 2007 Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
David,
That's quite an ambitious plan you are undertaking. I thought I saw another Motorhome in the background, so I'll guess that you already love the Motorhome experience.
Could you tell us a little bit about yourself and the coach you are working on? Where are you and how do you plan to use the finished coach? Then again, there are plenty who get as much satisfaction working on these beauties as they do traveling in them!
Thanks,
Larry Davick
The Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Sent from my iPad
On Nov 19, 2011, at 8:58 AM, davidlive@gmail.com <davidlive@gmail.com> wrote:
>
>
> Hello Everyone, i'm new to the forums and the gmc motorhome, i recently acquired one (couple months ago) it's a 1974 26's painted desert model.
> I researched and feel in love with the design of these.
>
> I wanted a project coach that i will have to rebuild from the ground up, this will probably take me years to do as it's simply in a rv storage place atm while i tear out the interior and look for a better place to work on it.
>
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome5.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome6.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome8.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome7.jpg
>
> I've already started ripping out the interior which was original and in very bad condition, i forgot to take before pictures and only have the two the seller had
>
> Before
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome9.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome10.jpg
>
>
> During
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0151.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0152.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0153.jpg
>
>
> I'm still working on ripping more of the interior out, i've got the shower and heater out sense those pictures.
>
>
>
>
> I just wanted to make this thread as a way to track what i'm doing and ideals and hear from others what they think, this again is a project that i figure will take me years to complete lol :)
>
>
> Some upgrade Ideals i have
> though the bumper hitch (i plan on possibly towing a 22-26' enclosed trailer)
> max brake system
> rims and tires (last thing i do as the current tires are new)
> Air bad system
> brake system (disc, power booster)
> chuck aulgar reaction bar
> raise the frame for larger tanks / batteries (rougly 3")
> Headlights, taillights, clearance lights (LED)
> Central Vacuum system
> Tank-less water heater (propane / 120v)
> Custom lighting
> Microwave mounted about stove
> flip up tv mounted over passenger seat
> Light on retractable cord mounted in refrigerator maintenance door
> Custom Dashboard
> New windows
> Ev conversion (electric motors)
> Solar panels (remove rear ladder)
> Place generator in front (where the radiator would had been)
> replace all appliances
> Redo all plumbing and electrical wiring (romex wiring and hard copper plumbing)
> Remove dashboard a/c and heater (due to ev conversion)
> Remove 2nd gas tank leave 1 tank (for generator to use dual fuel sources gas/propane)
>
>
>
> Current ideal floor plan
>
>
> -----------------------------
> | possible propane tank
> |----------------------------
> | Water Tank
> | Queen Bed
> | Water ---------
> | Heater | Drawers |
> |----------------------------
> | Toliet|
> |
> |
> | Shower Closet
> |
> |
> |--------
> |
> | Refrig Stove/Microwave
> |
> |
> |----
> |
> |Door Sink / Heater
> |
> |
> |----
> |
> |
> |
> | Desk Couch
> |
> |
> |
> |------------------------
> |
> |
> |
> |
> | TV Drivers seat
> |
> |
> -------------------------
>
>
>
>
> David
>
> ______________________________________________
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
Re: [GMCnet] My project Coach [message #150133 is a reply to message #150121] |
Sat, 19 November 2011 16:14 |
davidlive
Messages: 143 Registered: November 2011 Location: Simi valley, Southern Cal...
Karma: -1
|
Senior Member |
|
|
Dear ljdavick
that was a picture at the seller's place, i wish that motorhome in the background was mine as well lol, it's a extremely fancy one
I'm 32 years old male located in simi valley, ca
it's a 1974 26's painted desert, i'm not sure how many owners it's had or where it's been the person i bought it from had it in fresno, ca.
i plan on working on this for a couple years so i don't really have a date when i'll be done, as for what i'll use it for not sure yet, i'd love to just travel abroad, expessily if i get my power from the sun and live green the only thing i'll have in expenses gas/propane for the generator/stove/heaters and of course food/clothes.
Today i cleaned up the coach and took some more pictures of me taking apart the interior
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0203.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0202.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0207.jpg
the rear wheel wells are cracking and need of replacement, i think i'll remake them later out of a sheet metal
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0204.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0205.jpg
also found out the floor board is rotted out, i already planned on redoing the floor but this gives me a reason for sure now
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0206.jpg
also the lower hinge on the door is breaking or rather should say the door frame is, not sure yet if i'm going to attempt to repair the door or simply buy a used one
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0208.jpg
78 Royal #749
74 #136
Oversteer is when you hit the wall with the rear of the car, understeer is when you hit the wall with the front of the car. Hp is how fast you hit the wall, and torque is how far you take the wall with you when you hit it.
[Updated on: Sat, 19 November 2011 16:17] Report message to a moderator
|
|
|
Re: [GMCnet] My project Coach [message #150136 is a reply to message #150133] |
Sat, 19 November 2011 16:18 |
|
ljdavick
Messages: 3548 Registered: March 2007 Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
Go for it!
Sent from my iPad
On Nov 19, 2011, at 2:14 PM, davidlive@gmail.com <davidlive@gmail.com> wrote:
>
>
> Dear ljdavick
>
> that was a picture at the seller's place, i wish that motorhome in the background was mine as well lol, it's a extremely fancy one
>
> I'm 32 years old male located in simi valley, ca
> i plan on working on this for a couple years so i don't really have a date when i'll be done, as for what i'll use it for not sure yet, i'd love to just travel abroad, expessily if i get my power from the sun and live green the only thing i'll have in expenses gas/propane for the generator/stove/heaters and of course food/clothes.
>
>
>
> Today i cleaned up the coach and took some more pictures of me taking apart the interior
>
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0203.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0202.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0207.jpg
>
>
> the rear wheel wells are cracking and need of replacement, i think i'll remake them later out of a sheet metal
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0204.jpg
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0205.jpg
>
>
> also found out the floor board is rotted out, i already planned on redoing the floor but this gives me a reason for sure now
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0206.jpg
>
>
> also the lower hinge on the door is breaking or rather should say the door frame is, not sure yet if i'm going to attempt to repair the door or simply buy a used one
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0208.jpg
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
Re: [GMCnet] My project Coach [message #150137 is a reply to message #150133] |
Sat, 19 November 2011 16:20 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
this might be a better link
http://s3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/?albumview=slideshow
gene
On Sat, Nov 19, 2011 at 2:14 PM, davidlive@gmail.com <davidlive@gmail.com>wrote:
>
>
> Dear ljdavick
>
> that was a picture at the seller's place, i wish that motorhome in the
> background was mine as well lol, it's a extremely fancy one
>
> I'm 32 years old male located in simi valley, ca
> i plan on working on this for a couple years so i don't really have a date
> when i'll be done, as for what i'll use it for not sure yet, i'd love to
> just travel abroad, expessily if i get my power from the sun and live green
> the only thing i'll have in expenses gas/propane for the
> generator/stove/heaters and of course food/clothes.
>
>
>
> Today i cleaned up the coach and took some more pictures of me taking
> apart the interior
>
>
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0203.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0202.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0207.jpg
>
>
> the rear wheel wells are cracking and need of replacement, i think i'll
> remake them later out of a sheet metal
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0204.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0205.jpg
>
>
> also found out the floor board is rotted out, i already planned on redoing
> the floor but this gives me a reason for sure now
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0206.jpg
>
>
> also the lower hinge on the door is breaking or rather should say the door
> frame is, not sure yet if i'm going to attempt to repair the door or simply
> buy a used one
>
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0208.jpg
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
Re: My project Coach [message #150149 is a reply to message #150109] |
Sat, 19 November 2011 17:50 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Heh, such a familiar sight. I remember when I was at that stage.
Interesting screaming chicken on the sides.
You're even younger than I.
Welcome to the nuthouse, and don't give up no matter how dire it gets. It's worth it.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
[Updated on: Sun, 20 November 2011 14:12] Report message to a moderator
|
|
|
Re: [GMCnet] My project Coach [message #150160 is a reply to message #150109] |
Sat, 19 November 2011 18:53 |
Ray Erspamer
Messages: 1707 Registered: May 2007 Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Welcome to the group Dave, you're going to meet some incredible people out here
and you're going to have a blast working on the coach. If we can help in any
way, just ask.
Ray
Ray & Lisa Erspamer
78 Royale "Great Lakes Eagle"
Center Kitchen TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
----- Original Message ----
From: "davidlive@gmail.com" <davidlive@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Sat, November 19, 2011 10:58:04 AM
Subject: [GMCnet] My project Coach
Hello Everyone, i'm new to the forums and the gmc motorhome, i recently acquired
one (couple months ago) it's a 1974 26's painted desert model.
I researched and feel in love with the design of these.
I wanted a project coach that i will have to rebuild from the ground up, this
will probably take me years to do as it's simply in a rv storage place atm while
i tear out the interior and look for a better place to work on it.
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome5.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome6.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome8.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome7.jpg
I've already started ripping out the interior which was original and in very bad
condition, i forgot to take before pictures and only have the two the seller had
Before
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome9.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome10.jpg
During
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0151.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0152.jpg
http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0153.jpg
I'm still working on ripping more of the interior out, i've got the shower and
heater out sense those pictures.
I just wanted to make this thread as a way to track what i'm doing and ideals
and hear from others what they think, this again is a project that i figure will
take me years to complete lol :)
Some upgrade Ideals i have
though the bumper hitch (i plan on possibly towing a 22-26' enclosed trailer)
max brake system
rims and tires (last thing i do as the current tires are new)
Air bad system
brake system (disc, power booster)
chuck aulgar reaction bar
raise the frame for larger tanks / batteries (rougly 3")
Headlights, taillights, clearance lights (LED)
Central Vacuum system
Tank-less water heater (propane / 120v)
Custom lighting
Microwave mounted about stove
flip up tv mounted over passenger seat
Light on retractable cord mounted in refrigerator maintenance door
Custom Dashboard
New windows
Ev conversion (electric motors)
Solar panels (remove rear ladder)
Place generator in front (where the radiator would had been)
replace all appliances
Redo all plumbing and electrical wiring (romex wiring and hard copper plumbing)
Remove dashboard a/c and heater (due to ev conversion)
Remove 2nd gas tank leave 1 tank (for generator to use dual fuel sources
gas/propane)
Current ideal floor plan
-----------------------------
| possible propane tank
|----------------------------
| Water Tank
| Queen Bed
| Water ---------
| Heater | Drawers |
|----------------------------
| Toliet|
|
|
| Shower Closet
|
|
|--------
|
| Refrig Stove/Microwave
|
|
|----
|
|Door Sink / Heater
|
|
|----
|
|
|
| Desk Couch
|
|
|
|------------------------
|
|
|
|
| TV Drivers seat
|
|
-------------------------
David
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
Re: [GMCnet] My project Coach [message #150165 is a reply to message #150109] |
Sat, 19 November 2011 19:32 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Sounds like a great project!!
One item you stated was to Redo all plumbing and electrical wiring (romex
wiring and hard copper plumbing), I thought that I read in the forum or
elsewhere that you don't want to hard copper plumb as road vibrations might
work the connections loose. I leave it up to the experts here to commit on
that.
On Sat, Nov 19, 2011 at 9:58 AM, davidlive@gmail.com <davidlive@gmail.com>wrote:
>
>
> Hello Everyone, i'm new to the forums and the gmc motorhome, i recently
> acquired one (couple months ago) it's a 1974 26's painted desert model.
> I researched and feel in love with the design of these.
>
> I wanted a project coach that i will have to rebuild from the ground up,
> this will probably take me years to do as it's simply in a rv storage place
> atm while i tear out the interior and look for a better place to work on it.
>
>
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome5.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome6.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome8.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome7.jpg
>
> I've already started ripping out the interior which was original and in
> very bad condition, i forgot to take before pictures and only have the two
> the seller had
>
> Before
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome9.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/motorhome10.jpg
>
>
> During
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0151.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0152.jpg
>
> http://i3.photobucket.com/albums/y92/DavidLive/1974%20GMC%20Motorhome/IMAG0153.jpg
>
>
> I'm still working on ripping more of the interior out, i've got the shower
> and heater out sense those pictures.
>
>
>
>
> I just wanted to make this thread as a way to track what i'm doing and
> ideals and hear from others what they think, this again is a project that i
> figure will take me years to complete lol :)
>
>
> Some upgrade Ideals i have
> though the bumper hitch (i plan on possibly towing a 22-26' enclosed
> trailer)
> max brake system
> rims and tires (last thing i do as the current tires are new)
> Air bad system
> brake system (disc, power booster)
> chuck aulgar reaction bar
> raise the frame for larger tanks / batteries (rougly 3")
> Headlights, taillights, clearance lights (LED)
> Central Vacuum system
> Tank-less water heater (propane / 120v)
> Custom lighting
> Microwave mounted about stove
> flip up tv mounted over passenger seat
> Light on retractable cord mounted in refrigerator maintenance door
> Custom Dashboard
> New windows
> Ev conversion (electric motors)
> Solar panels (remove rear ladder)
> Place generator in front (where the radiator would had been)
> replace all appliances
> Redo all plumbing and electrical wiring (romex wiring and hard copper
> plumbing)
> Remove dashboard a/c and heater (due to ev conversion)
> Remove 2nd gas tank leave 1 tank (for generator to use dual fuel sources
> gas/propane)
>
>
>
> Current ideal floor plan
>
>
> -----------------------------
> | possible propane tank
> |----------------------------
> | Water Tank
> | Queen Bed
> | Water ---------
> | Heater | Drawers |
> |----------------------------
> | Toliet|
> |
> |
> | Shower Closet
> |
> |
> |--------
> |
> | Refrig Stove/Microwave
> |
> |
> |----
> |
> |Door Sink / Heater
> |
> |
> |----
> |
> |
> |
> | Desk Couch
> |
> |
> |
> |------------------------
> |
> |
> |
> |
> | TV Drivers seat
> |
> |
> -------------------------
>
>
>
>
> David
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
GMC Wannabe
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Re: [GMCnet] My project Coach [message #150172 is a reply to message #150165] |
Sat, 19 November 2011 20:03 |
davidlive
Messages: 143 Registered: November 2011 Location: Simi valley, Southern Cal...
Karma: -1
|
Senior Member |
|
|
Thank you very much, that is a excellent point, i didn't even think about that when i thought i'd redo it in hard copper, the soft copper probably gives more so the vibration doesn't affect it like hard would plus the compression fittings would hold better, and possibly easier to work with. that will be the way to go then
(updated main post to reflect that)
Thanks David
78 Royal #749
74 #136
Oversteer is when you hit the wall with the rear of the car, understeer is when you hit the wall with the front of the car. Hp is how fast you hit the wall, and torque is how far you take the wall with you when you hit it.
[Updated on: Sat, 19 November 2011 20:04] Report message to a moderator
|
|
|
|
Re: My project Coach [message #150193 is a reply to message #150109] |
Sat, 19 November 2011 22:17 |
Chr$
Messages: 2690 Registered: January 2004 Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
PEX Tubing. You won't regret it. find it a Lowes.
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
Re: My project Coach [message #150259 is a reply to message #150198] |
Sun, 20 November 2011 13:50 |
davidlive
Messages: 143 Registered: November 2011 Location: Simi valley, Southern Cal...
Karma: -1
|
Senior Member |
|
|
I sure hope i don't get tired of working on it, i doubt i will as i only have a day or two i get to even work on it, only on my days off of work, till i find a better place to work on it.
Also is there a upgrade for the front end suspension ? i read in another fourm post but didn't quite understand, i would be interested as i'm doing a conversion to ev i would want the front end to be able to support more weight if possible?
78 Royal #749
74 #136
Oversteer is when you hit the wall with the rear of the car, understeer is when you hit the wall with the front of the car. Hp is how fast you hit the wall, and torque is how far you take the wall with you when you hit it.
|
|
|
Re: My project Coach [message #150261 is a reply to message #150109] |
Sun, 20 November 2011 14:13 |
GeorgeRud
Messages: 1380 Registered: February 2007 Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
There is a one ton front end conversion (Hubler front end)that is gaining popularity as the parts are more robust and availability of parts should be better in the future.
Definitely take lots of pictures as you go, and don't hesitate to ask questions as you go. It's best to learn and not repeat other's mistakes as you proceed.
Welcome to the group!
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
Re: My project Coach [message #150282 is a reply to message #150259] |
Sun, 20 November 2011 17:38 |
rvanwin
Messages: 325 Registered: April 2007 Location: Battlefield, MO
Karma: 6
|
Senior Member |
|
|
davidlive wrote on Sun, 20 November 2011 13:50 | i would be interested as i'm doing a conversion to ev i would want the front end to be able to support more weight if possible?
|
I have always been interested in EV and Hybrid vehicles. I believe that is the future for effectively meeting our overall transportation needs. I would be interested what you are planning for the GMC. There are some large vehicle applications that work but are costly. Just wondering about your thinking process?
Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
|
|
|
Goto Forum:
Current Time: Mon Nov 18 20:42:25 CST 2024
Total time taken to generate the page: 0.01299 seconds
|