Re: [GMCnet] Let's talk about Batteries [message #147681] |
Mon, 24 October 2011 14:55 |
Dan Winchester
Messages: 61 Registered: August 2006
Karma:
|
Member |
|
|
Copper washer would probably never cause a problem but still should not be placed between terminal and cable end, place it between cable end and nut.
Good cable ends are tinned and when tightened against a terminal the tin creates an airtight sealed connection that is less likley to corrode and create a high resistance. Just a little tidbit I learned while getting my marine electrical technitions certification.
Dan Winchester
www.dwinchester.com
----- Reply message -----
From: "Thomas Phipps" <tph1pp5@yahoo.com>
Date: Mon, Oct 24, 2011 10:51 am
Subject: [GMCnet] Let's talk about Batteries
To: <gmclist@temp.gmcnet.org>
I use a 100% copper washer. Helps keep the wing nut tight.
Tom Phipps,
MS II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|