GMCforum: GMCnet » Led's from Dan Gregg...fit in original fixtures

Home » Public Forums » GMCnet » Led's from Dan Gregg...fit in original fixtures

Show: Today's Messages :: Polls :: Message Navigator

Led's from Dan Gregg...fit in original fixtures [message #146446]

Thu, 13 October 2011 21:59

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma: 5

Senior Member

From Dan Gregg I got a couple of LED conversion modules that fit in our original fixtures. Lumens equal an 1156 lamp. Leds have a double sided thermal tape on them. They happen fit right in the groove of our original fixtures and use it as a heat sink. Pics

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41107&title=leds-to-fit-in-original-light-fixtures&cat=3841

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41108&title=leds-to-fit-in-original-light-fixtures&cat=3841

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146471 is a reply to message #146446]

Fri, 14 October 2011 08:56

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

Wally, Dan,

My 73 coach has three bulbs in each bathroom fixture and my fixture has a round depression backing up each bulb. Do you replace each bulb with an led?

Dennis

wally wrote on Thu, 13 October 2011 21:59

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146476 is a reply to message #146471]

Fri, 14 October 2011 09:25

wally

Messages: 643
Registered: August 2004
Location: Omaha Nebraska

Karma: 5

Senior Member

Dennis S wrote on Fri, 14 October 2011 08:56

Wally, Dan,

My 73 coach has three bulbs in each bathroom fixture and my fixture has a round depression backing up each bulb. Do you replace each bulb with an led?

Dennis

wally wrote on Thu, 13 October 2011 21:59

Dennis, I swapped one bulb in each three bulb fixture for now. The fixtures on ours have a v shaped reflector with a flat which the LED module fits right in. LED's come with an aluminum heat sink 3 by 3 1/2" which I didn't need. Darn I thought the fixtures would be the same.

Wally Anderson
Omaha NE
75 Glenbrook

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146483 is a reply to message #146476]

Fri, 14 October 2011 10:09

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Dennis, a couple of these will light up a wet bath. Some use a couple of them when dry camping and don't turn the bulbs on. Use the bulbs when plugged in. Its just up to the one paying for them. These are pretty bright, 220 lumen.
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146485 is a reply to message #146483]

Fri, 14 October 2011 10:36

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

Wally, Dan,

Here is a photo of my original bath light fixture, Progressive Dynamics PD101055.

If I converted this would I want to use the heat sink material?
What is the purpose?

http://www.gmcmhphotos.com/photos/showphoto.php?photo=41109&title=gmc-bath-lights-002&cat=4620

http://goo.gl/7MDKe

Thanks guys,

Dennis

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146488 is a reply to message #146485]

Fri, 14 October 2011 11:22

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

No Dennis. It will stick right in there, as long as it is metal. The light Wally shows is a high powered one with a voltage regulator that needs a heat sink. If not, it will go off every 5 minutes, when it heats up, stay off til it cools. The thing will handle 30 plus volts.
I have smaller ones that require no heat sink.
Dan

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146502 is a reply to message #146488]

Fri, 14 October 2011 13:43

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma: 13

Senior Member

I used the LEDs from Prudent RVer, that Dan sells, in the center bulb locations on both bathroom fixtures. I used three 3-LED strips in one and (because I had an extra one) four in the other. Probably overkill, but it lights the bathroom very brightly. I almost never flip the switch to the second position to light the incandescent bulbs in the top and bottom positions.

http://www.gmcmhphotos.com/photos/showphoto.php?photo=37592

http://www.gmcmhphotos.com/photos/showphoto.php?photo=37595

http://www.gmcmhphotos.com/photos/showphoto.php?photo=37622

We love these lights and love the light color.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146508 is a reply to message #146502]

Fri, 14 October 2011 16:36

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Good pictures Carl. It takes 4 of those to equal one that Wally has. I use a mixture of both in our coach, along with the fluorescent replacements.
Will show them off tomorrow at the car show I am taking the GMC and Bug to. Teri made me some nice posters bragging on the GMC and upgrades.
Dan

Report message to a moderator

Re: Led's from Dan Gregg...fit in original fixtures [message #146516 is a reply to message #146508]

Fri, 14 October 2011 18:17

mike miller

Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon

Karma: 0

Senior Member

WD0AFQ wrote on Fri, 14 October 2011 14:36

... Will show them off tomorrow at the car show I am taking the GMC and Bug to. Teri made me some nice posters bragging on the GMC and upgrades.

Print out some "GMCers Brochures" to give out. Byron Songer created them just for this and they can be found here:

<http://www.gmceast.com/lifestyle/gmcers/>

JimK printed out a bunch (with generic "MY GMC" information) and we gave them out at the TI air show. (Big hit on Sunday.)

Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com

Report message to a moderator

Previous Topic:	[GMCnet] Hubcaps!
Next Topic:	[GMCnet] In tank fuel pump on eBay

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 06 11:31:37 CST 2024

Total time taken to generate the page: 0.05169 seconds