Home » Public Forums » GMCnet » [GMCnet] Favorite Exotic Tools?
| [GMCnet] Favorite Exotic Tools? [message #146403] |
Thu, 13 October 2011 15:33  |
 |
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
One of the other lists I frequent has a thread going about favorite exotic tools. Here are some that I found interesting, but first - if anyone is looking for an Air Conditioning manifold gauge set Harbor Freight has theirs on sale for $40. <http://www.harborfreight.com/a-c-manifold-gauge-set-92649.html?utm_campaign=SEO&utm_medium=Inbound_links&utm_source=linking>
or
<http://tinyurl.com/3gb9z48>
Exotic tools:
The Mini-Ductor II is a device that can heat a ferrous nut, bolt, or whatever using electric induction , and not a flame. Look at the video, it's cool, but a bit more than $400.
<http://www.theinductor.com/index.php>
Harbor Freight vibrating tumbler and walnut shells to clean nuts, bolts, or other pieces from the vehicle.
Thread Chasers, like this one from Mac Tools
<http://www.mactools.com/shoponline/product/tabid/120/p-320457-trcombo-48.aspx>
or
<http://tinyurl.com/4xv4k3p>
Fiberoptic camera from many sources
Crosstech Super Industrial 357 torch <http://www.supplierofchoice.com/super_industrial1.htm>
or
< http://tinyurl.com/3lvcbpg >
Thread Detective - by www.knobsource.com
It's just a bunch of SAE or Metric nuts and bolts labeled to the correct size, like you'd find at a hardware store.
Here's a cheapie - a strap on LED head-light, or a lighted magnifying visor - Harbor Freight has these.
And one more Harbor Freight cheapie - they call it a Third Hand - a few articulated clips and a magnifying glass.
There were many lifts, presses, torque wrenches of every imaginable size and shape, and much more.
Gene has his squirt bottles - what about the rest of you? Any home made or exotic tools that you'd like to share?
Larry Davick
Fremont, California
The Mystery Machine
'76 (ish) Palm Beach
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146409 is a reply to message #146403] |
Thu, 13 October 2011 16:29  |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Larry,
Since you opened it to home made tools (certainly not exotic) but here is one of my own construction --- a toilet flange installation tool -- for those who still have the threaded inlet/flange.
http://www.gmcmhphotos.com/photos/showgallery.php?cat=5690
Dennis
| ljdavick wrote on Thu, 13 October 2011 15:33 |
One of the other lists I frequent has a thread going about favorite exotic tools. Here are some that I found interesting, but first - if anyone is looking for an Air Conditioning manifold gauge set Harbor Freight has theirs on sale for $40. <http://www.harborfreight.com/a-c-manifold-gauge-set-92649.html?utm_campaign=SEO&utm_medium=Inbound_links&utm_source=linking>
or
<http://tinyurl.com/3gb9z48>
Exotic tools:
The Mini-Ductor II is a device that can heat a ferrous nut, bolt, or whatever using electric induction , and not a flame. Look at the video, it's cool, but a bit more than $400.
<http://www.theinductor.com/index.php>
Harbor Freight vibrating tumbler and walnut shells to clean nuts, bolts, or other pieces from the vehicle.
Thread Chasers, like this one from Mac Tools
<http://www.mactools.com/shoponline/product/tabid/120/p-320457-trcombo-48.aspx>
or
<http://tinyurl.com/4xv4k3p>
Fiberoptic camera from many sources
Crosstech Super Industrial 357 torch <http://www.supplierofchoice.com/super_industrial1.htm>
or
< http://tinyurl.com/3lvcbpg >
Thread Detective - by www.knobsource.com
It's just a bunch of SAE or Metric nuts and bolts labeled to the correct size, like you'd find at a hardware store.
Here's a cheapie - a strap on LED head-light, or a lighted magnifying visor - Harbor Freight has these.
And one more Harbor Freight cheapie - they call it a Third Hand - a few articulated clips and a magnifying glass.
There were many lifts, presses, torque wrenches of every imaginable size and shape, and much more.
Gene has his squirt bottles - what about the rest of you? Any home made or exotic tools that you'd like to share?
Larry Davick
Fremont, California
The Mystery Machine
'76 (ish) Palm Beach
|
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146412 is a reply to message #146409] |
Thu, 13 October 2011 17:04 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Mine is simple and inexpensive...the thread file!
http://www.webbikeworld.com/motorcycle-tools/thread-file/
Mike in NS
On Thu, Oct 13, 2011 at 6:29 PM, Dennis Sexton <dennisfsexton@aol.com>wrote:
>
>
> Larry,
>
> Since you opened it to home made tools (certainly not exotic) but here is
> one of my own construction --- a toilet flange installation tool -- for
> those who still have the threaded inlet/flange.
>
> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5690
>
> Dennis
>
> ljdavick wrote on Thu, 13 October 2011 15:33
> > One of the other lists I frequent has a thread going about favorite
> exotic tools. Here are some that I found interesting, but first - if anyone
> is looking for an Air Conditioning manifold gauge set Harbor Freight has
> theirs on sale for $40. <
> http://www.harborfreight.com/a-c-manifold-gauge-set-92649.html?utm_campaign=SEO&utm_medium=Inbound_links&utm_source=linking
> >
> > or
> > <http://tinyurl.com/3gb9z48>
> >
> > Exotic tools:
> >
> > The Mini-Ductor II is a device that can heat a ferrous nut, bolt, or
> whatever using electric induction , and not a flame. Look at the video, it's
> cool, but a bit more than $400.
> > <http://www.theinductor.com/index.php>
> >
> > Harbor Freight vibrating tumbler and walnut shells to clean nuts, bolts,
> or other pieces from the vehicle.
> >
> > Thread Chasers, like this one from Mac Tools
> > <
> http://www.mactools.com/shoponline/product/tabid/120/p-320457-trcombo-48.aspx
> >
> > or
> > <http://tinyurl.com/4xv4k3p>
> >
> > Fiberoptic camera from many sources
> >
> > Crosstech Super Industrial 357 torch <
> http://www.supplierofchoice.com/super_industrial1.htm>
> > or
> > < http://tinyurl.com/3lvcbpg >
> >
> > Thread Detective - by www.knobsource.com
> > It's just a bunch of SAE or Metric nuts and bolts labeled to the correct
> size, like you'd find at a hardware store.
> >
> > Here's a cheapie - a strap on LED head-light, or a lighted magnifying
> visor - Harbor Freight has these.
> >
> > And one more Harbor Freight cheapie - they call it a Third Hand - a few
> articulated clips and a magnifying glass.
> >
> > There were many lifts, presses, torque wrenches of every imaginable size
> and shape, and much more.
> >
> > Gene has his squirt bottles - what about the rest of you? Any home made
> or exotic tools that you'd like to share?
> >
> >
> >
> >
> > Larry Davick
> > Fremont, California
> > The Mystery Machine
> > '76 (ish) Palm Beach
>
>
> --
> Dennis S
> 73 Painted Desert 230
> Germantown, TN
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146415 is a reply to message #146412] |
Thu, 13 October 2011 17:19 |
Gary Worobec
Messages: 867
Registered: May 2005
Karma: -1
|
Senior Member |
|
|
My inexpensive Soda Blaster and my rather expensive aluminum spool gun for
my MIG welder.
Thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
----- Original Message -----
From: "Kingsley Coach" <kingsleygmc@gmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Thursday, October 13, 2011 3:04 PM
Subject: Re: [GMCnet] Favorite Exotic Tools?
> Mine is simple and inexpensive...the thread file!
>
> http://www.webbikeworld.com/motorcycle-tools/thread-file/
>
> Mike in NS
>
>
>
> On Thu, Oct 13, 2011 at 6:29 PM, Dennis Sexton
> <dennisfsexton@aol.com>wrote:
>
>>
>>
>> Larry,
>>
>> Since you opened it to home made tools (certainly not exotic) but here is
>> one of my own construction --- a toilet flange installation tool -- for
>> those who still have the threaded inlet/flange.
>>
>> http://www.gmcmhphotos.com/photos/showgallery.php?cat=5690
>>
>> Dennis
>>
>> ljdavick wrote on Thu, 13 October 2011 15:33
>> > One of the other lists I frequent has a thread going about favorite
>> exotic tools. Here are some that I found interesting, but first - if
>> anyone
>> is looking for an Air Conditioning manifold gauge set Harbor Freight has
>> theirs on sale for $40. <
>> http://www.harborfreight.com/a-c-manifold-gauge-set-92649.html?utm_campaign=SEO&utm_medium=Inbound_links&utm_source=linking
>> >
>> > or
>> > <http://tinyurl.com/3gb9z48>
>> >
>> > Exotic tools:
>> >
>> > The Mini-Ductor II is a device that can heat a ferrous nut, bolt, or
>> whatever using electric induction , and not a flame. Look at the video,
>> it's
>> cool, but a bit more than $400.
>> > <http://www.theinductor.com/index.php>
>> >
>> > Harbor Freight vibrating tumbler and walnut shells to clean nuts,
>> > bolts,
>> or other pieces from the vehicle.
>> >
>> > Thread Chasers, like this one from Mac Tools
>> > <
>> http://www.mactools.com/shoponline/product/tabid/120/p-320457-trcombo-48.aspx
>> >
>> > or
>> > <http://tinyurl.com/4xv4k3p>
>> >
>> > Fiberoptic camera from many sources
>> >
>> > Crosstech Super Industrial 357 torch <
>> http://www.supplierofchoice.com/super_industrial1.htm>
>> > or
>> > < http://tinyurl.com/3lvcbpg >
>> >
>> > Thread Detective - by www.knobsource.com
>> > It's just a bunch of SAE or Metric nuts and bolts labeled to the
>> > correct
>> size, like you'd find at a hardware store.
>> >
>> > Here's a cheapie - a strap on LED head-light, or a lighted magnifying
>> visor - Harbor Freight has these.
>> >
>> > And one more Harbor Freight cheapie - they call it a Third Hand - a few
>> articulated clips and a magnifying glass.
>> >
>> > There were many lifts, presses, torque wrenches of every imaginable
>> > size
>> and shape, and much more.
>> >
>> > Gene has his squirt bottles - what about the rest of you? Any home made
>> or exotic tools that you'd like to share?
>> >
>> >
>> >
>> >
>> > Larry Davick
>> > Fremont, California
>> > The Mystery Machine
>> > '76 (ish) Palm Beach
>>
>>
>> --
>> Dennis S
>> 73 Painted Desert 230
>> Germantown, TN
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146416 is a reply to message #146412] |
Thu, 13 October 2011 17:28 |
 |
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Cool!
I can think of a few uses (mostly non-gmc) right of the top of my head.
But I really like this new word: Custovation
| Quote: |
*Custovation is a combination of customizing, and renovation. Not a restoration, which means to bring back to an original condition. Custovation has a more specific meaning: CUSTOMIZE - to make or alter to individual or personal specifications combined with RENOVATION which is to restore to an earlier condition, by repairing or remodeling.
|
Granted, I do not know how to pronounce "Custovation."
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146441 is a reply to message #146440] |
Thu, 13 October 2011 21:29 |
midlf
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
| k2gkk wrote on Thu, 13 October 2011 20:56 |
I've seen those and MAY even have one!
|
I also have a thread file. I could use it, if I could find it.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146474 is a reply to message #146449] |
Fri, 14 October 2011 09:18 |
midlf
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
|
Senior Member |
|
|
For me the greatest and most used tool is my LED headlight.
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146491 is a reply to message #146403] |
Fri, 14 October 2011 11:56 |
LNelson
Messages: 335
Registered: December 2008
Location: Springfield, MO
Karma: 0
|
Senior Member |
|
|
I bought a "tool" from Sporty's Pilot shop, actually I bought 3. Just think of the finger of a glove, with a little magnet imbedded in the fabric somehow. Have you ever had to reach around something, where you only had room for a finger tip, you could not see but you could feel....but you had to hold a "nut" up behind so you could insert the machine screw or bolt from the accessible side of whatever you were working on??? (I know that was a long sentence). Did you ever wish you had something sticky that would hold that little nut onto your index finger long enough to get the machine screw started???
Yes, someone makes these. Very handy in all applications of working "blind".
check out Sporty's.
Larry Nelson Springfield, MO
Ex GMC'er, then GM Busnut
now '77 Eleganza ARS WB0JOT
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146526 is a reply to message #146403] |
Fri, 14 October 2011 19:14 |
Chr$
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
|
Senior Member |
|
|
Yeah, only problem with the HF gauge set is it's for 134A only...
-Chr$: Perpetual SmartAss
Scottsdale, AZ
77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146539 is a reply to message #146526] |
Fri, 14 October 2011 20:27 |
|
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
Tom Hampton put the adapters on my valves for his testing.
Larry Davick
Fremont, California
The Mystery Machine
'76 (ish) Palm Beach
----- Original Message -----
From: "Chris Choffat" <cchoffataz@yahoo.com>
To: gmclist@temp.gmcnet.org
Sent: Friday, October 14, 2011 5:14:12 PM
Subject: Re: [GMCnet] Favorite Exotic Tools?
Yeah, only problem with the HF gauge set is it's for 134A only...
--
-Chr$: Perpetual SmartAss
Scottsdale, AZ
"The Escape Pod" A 77 Ex-Kingsley Featuring: Olds 455, Manny Power Drive, 3:21, Rockwell, Jim B QJET, Quadra bag. Still needs paint!
Photosite: Chrisc "It has Begun"
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146555 is a reply to message #146526] |
Fri, 14 October 2011 21:45 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Unless you intend to stick with R-12, having only R134a fittings should not
be a problem: Technically, absurd as it is, you're supposed to "convert" to
R-134a before you install Duracool -- so you'll have the correct fittings to
use with the R-134a gauges.
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI+ & EBL
www.gmcwipersetc.com
On Fri, Oct 14, 2011 at 8:14 PM, Chris Choffat <cchoffataz@yahoo.com> wrote:
>
>
> Yeah, only problem with the HF gauge set is it's for 134A only...
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146558 is a reply to message #146539] |
Fri, 14 October 2011 22:03 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
also makes it legal
gene
On Fri, Oct 14, 2011 at 6:27 PM, Larry Davick <ljdavick@comcast.net> wrote:
> Tom Hampton put the adapters on my valves for his testing.
>
>
> Larry Davick
> Fremont, California
> The Mystery Machine
> '76 (ish) Palm Beach
>
> ----- Original Message -----
> From: "Chris Choffat" <cchoffataz@yahoo.com>
> To: gmclist@temp.gmcnet.org
> Sent: Friday, October 14, 2011 5:14:12 PM
> Subject: Re: [GMCnet] Favorite Exotic Tools?
>
>
>
> Yeah, only problem with the HF gauge set is it's for 134A only...
> --
> -Chr$: Perpetual SmartAss
> Scottsdale, AZ
> "The Escape Pod" A 77 Ex-Kingsley Featuring: Olds 455, Manny Power Drive,
> 3:21, Rockwell, Jim B QJET, Quadra bag. Still needs paint!
>
> Photosite: Chrisc "It has Begun"
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146582 is a reply to message #146403] |
Sat, 15 October 2011 08:31 |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
As the work I do is different than most, I have many tools that most people have never seen, let alone might imagine exist. I will not bother you with most of them as you will never have need for these, but there are two that you should hear about.
I have a collection of straight and curved hemostats (little pliers that can lock) that are valuable in so many places when working on instrument and computer size wiring. If you don't have any, next time you are at a flea market - think about it.
The one that gets the most strange looks and requests to examine are my "QwickWedge" screwdrivers - I have a small assortment, but I carry two long ones (different sizes)in my kit. As I used to regularly add and remove ring terminals from barrier strips and such, these are the tool to have. They will let you remove the screw with the terminals on it, rearrange as required and return the screw and terminals with great ease and no lost screws. They are great anyplace you have to manage straight slot screws.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
|
|
|
|
| Re: [GMCnet] Favorite Exotic Tools? [message #146599 is a reply to message #146584] |
Sat, 15 October 2011 10:07 |
|
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
| RF_Burns wrote on Sat, 15 October 2011 09:55 |
Matt,
That then brings up the question, why are slot screws still being used on new products?
Barrier terminal strips are terrible for this. I toss them and replace with a Robertson screw.
Ok there is my nifty tool, Robertson screwdrivers and a selection of Robertson screws.
|
Bruce,
While I may like your plan, in my case, there is a serious problem with it. I have to leave everything I do on boats so it can be dealt with by anybody that needs to at any time, and maybe even underway. One does not find drivers for Roberson, Torx, Clutch or Posidrive in a normal boat's tool collection and never on a Swiss Army knife or Leatherman.
It is also difficult to find Robertson screws in 6 or 8-32 as plated brass binderheads.
What does really annoy me is that most of the barrier strip that are readily available these days are from China and definitely from hunger. The screws are those terrible things with accommodations for both straight and Phillips and do neither well at all, and the screw thread fit often will not hold design load.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
Goto Forum:
Current Time: Tue Nov 05 05:34:28 CST 2024
Total time taken to generate the page: 0.05065 seconds
|
GMCforum
Search
Help
Register
Login
Home
