[GMCnet] Front brake lines [message #146270] |
Wed, 12 October 2011 08:32 |
Steve[3]
Messages: 13 Registered: September 2011
Karma: 0
|
Junior Member |
|
|
I tried to install the flex lines for the 80mm calipers from Applied last night, but wasn't sure how. Does anyone have a picture? I couldn't tell what the little bracket attaches to or how it attaches. Also not sure which is left and which is right.
Thanks
Steve Thomas
78 Eleganza II
Santa Cruz
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Front brake lines [message #146273 is a reply to message #146270] |
Wed, 12 October 2011 08:48 |
rvanwin
Messages: 325 Registered: April 2007 Location: Battlefield, MO
Karma: 6
|
Senior Member |
|
|
Steve[3 | wrote on Wed, 12 October 2011 08:32]I tried to install the flex lines for the 80mm calipers from Applied last night, but wasn't sure how. Does anyone have a picture? I couldn't tell what the little bracket attaches to or how it attaches. Also not sure which is left and which is right.
|
Steve,
I wrote this up for installation of the disk brake upgrade and JimK has included it on his website.
<http://appliedgmc.com/images/discbrakekit.pdf>
Part way down is a picture of how I attached the hose using the clips supplied. Some do not like drilling a hole into the upper control arm but I see no harm in doing so. Hope this helps.
Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
|
|
|
Re: [GMCnet] Front brake lines [message #146298 is a reply to message #146270] |
Wed, 12 October 2011 12:28 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
Steve[3 | wrote on Wed, 12 October 2011 06:32]I tried to install the flex lines for the 80mm calipers from Applied last night, but wasn't sure how. Does anyone have a picture? I couldn't tell what the little bracket attaches to or how it attaches. Also not sure which is left and which is right.
Thanks
Steve Thomas
78 Eleganza II
Santa Cruz
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
I have a few pics from my recent brake upgrade:
http://www.gmcmhphotos.com/photos/showphoto.php?photo=40168
http://www.gmcmhphotos.com/photos/showphoto.php?photo=40164
Between this and Randy's photos, it will be easier to figure it out. I too strugglad with this. [Note to Jim K.] These should be labled "right" and "left".
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
Re: [GMCnet] Front brake lines [message #146365 is a reply to message #146298] |
Wed, 12 October 2011 23:08 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
We find that we tend to think everyone can finger it out , so we tend
not to get too elaborate.
I will try to hire some people to go over these to help make it more
friendly to do.
I appreciate all the help we have received from people that have assisted us.
Thank you,
On Wed, Oct 12, 2011 at 10:28 AM, Carl Stouffer <carljr3b@yahoo.com> wrote:
>
>
> Steve[3
>> wrote on Wed, 12 October 2011 06:32]I tried to install the flex lines for the 80mm calipers from Applied last night, but wasn't sure how. Does anyone have a picture? I couldn't tell what the little bracket attaches to or how it attaches. Also not sure which is left and which is right.
>>
>> Thanks
>> Steve Thomas
>> 78 Eleganza II
>> Santa Cruz
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> I have a few pics from my recent brake upgrade:
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=40168
>
> http://www.gmcmhphotos.com/photos/showphoto.php?photo=40164
>
> Between this and Randy's photos, it will be easier to figure it out. I too strugglad with this. [Note to Jim K.] These should be labled "right" and "left".
> --
> Carl S.
> '75 ex Palm Beach
> Tucson, AZ.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|