GMCforum: GMCnet » Ram Air System Redux

Home » Public Forums » GMCnet » Ram Air System Redux

Show: Today's Messages :: Polls :: Message Navigator

Ram Air System Redux [message #145654]

Wed, 05 October 2011 20:53

SThornbg

Messages: 127
Registered: September 2011

Karma:

Senior Member

I have seen a lot of comments in the archives re the ram air installations people have done, but I don't find any sketches or pictures to guide newbies along the way.

I am trying to put 4" water heater vent (flexible)on the stock air cleaner housing shorkle. The snorkle has the 4" flair at the end. I am not able to make the bend coming off of the snorkle due to the close proximity to a structural brace. I have tried a hard tin flex elbow and I have tried coming directly off the snorkle with the flexible vent. Neither way allows me to reset the air cleaner housing on the carburetor.

Any advice would be very much appreciated.......

Steve Thornburg
South Bend, IN
'77 Palm Beach 455

Steve Thornburg South Bend, IN 77 exPB 455 "Tinker Toy"

Report message to a moderator

[Message index]

		Ram Air System Redux By: SThornbg on Wed, 05 October 2011 20:53
		Re: Ram Air System Redux By: WD0AFQ on Wed, 05 October 2011 21:39
		Re: Ram Air System Redux By: John Sharpe on Thu, 06 October 2011 06:12
		Re: Ram Air System Redux By: WD0AFQ on Thu, 06 October 2011 13:45
		Re: [GMCnet] Ram Air System Redux By: Mr ERFisher on Wed, 05 October 2011 21:40
		Re: [GMCnet] Ram Air System Redux By: spiffycar on Thu, 06 October 2011 03:15
		Re: Ram Air System Redux By: Hardie Johnson on Thu, 06 October 2011 07:10

Previous Topic:	GMCWS 'Survivor II' Rally Day 5 photos
Next Topic:	Jerry Lee's GMC fire

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 10:27:58 CST 2024

Total time taken to generate the page: 0.01453 seconds