GMCforum: GMCnet » still figuring out timing- no torque

Home » Public Forums » GMCnet » still figuring out timing- no torque

Show: Today's Messages :: Polls :: Message Navigator

still figuring out timing- no torque [message #145277]

Sun, 02 October 2011 17:34

hertfordnc

Messages: 1164
Registered: September 2009
Location: East NC

Karma:

Senior Member

Thanks to everyone's advice last week i was able to get it running pretty good.
It runs cool, electric fan does its job, doesn't overheat, idles pretty smoooth.

So tonight i tried to move it- into gear, makes lots of noise, no power, not much movement and it backfires out the carb.

I will time it properly after i get it moved but that will probably involve getting under it to locate and raise the timing mark and it is in mud where it's at.

Dave & Ellen Silva Hertford, NC 76 Birchaven, 1-ton and other stuff Currently planning the Great american Road Trip Summer 2021 It's gonna take a lot of Adderall to get this thing right.

Report message to a moderator

[Message index]

		still figuring out timing- no torque By: hertfordnc on Sun, 02 October 2011 17:34
		Re: still figuring out timing- no torque By: hertfordnc on Sun, 02 October 2011 17:54
		Re: still figuring out timing- no torque By: WD0AFQ on Sun, 02 October 2011 23:00
		Re: still figuring out timing- no torque By: hertfordnc on Mon, 03 October 2011 04:24
		Re: still figuring out timing- no torque By: fred v on Mon, 03 October 2011 07:52

Previous Topic:	[GMCnet] power steering hoses?
Next Topic:	A/C noise when off

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 19:48:37 CST 2024

Total time taken to generate the page: 0.01212 seconds