GMCforum: GMCnet » seeking permission

Home » Public Forums » GMCnet » seeking permission

Show: Today's Messages :: Polls :: Message Navigator

seeking permission [message #145048]

Thu, 29 September 2011 20:04

chasingsummer

Messages: 434
Registered: May 2011
Location: asheboro, nc

Karma: 0

Senior Member

i sent an email to someone who has a waterjet . i am thinking about keychains,
i received a responce reference to auto cad file
after searching i see that the henry davis site has a few. presently i am down loading software, which i hope will allow me to few these diagrams.
do i need henry davis's permission to share these files with someone?
if so, can anyone help me obtain that.
i have seen a few post reference to keychains, made me wish i had a nice one. nothing against what i have seen on line, but i sent a couple emails "fishing" i was thinking maybe 1/4 inch aluminum profile, ? ? i dont know what all is truely possible, but i do know that a water jet is a real nice machine.

any input?
thanks bgk

brian asheboro, nc 75 eleganza, 74 build 119k miles and counting, DOG HOUSE

Report message to a moderator

Re: seeking permission [message #145049 is a reply to message #145048]

Thu, 29 September 2011 20:14

carguy

Messages: 498
Registered: June 2006
Location: Coshocton OH

Karma: 0

Senior Member

FWIW, we have a water jet.

Bill Brown - '77 Buckeye Cruiser
Coshocton OH
carguybill@sbcglobal.net

Report message to a moderator

Re: [GMCnet] seeking permission [message #145162 is a reply to message #145049]

Sat, 01 October 2011 13:58

Byron Songer

Messages: 1912
Registered: August 2007
Location: Louisville, KY

Karma: -2

Senior Member

Your GMC key fobs displayed and available at Goshen looked great. I like
mine. It's special.

Byron

-----Original Message-----
From: Bill Brown <carguybill@sbcglobal.net>
Organization: GMCnet
Reply-To: <gmclist@temp.gmcnet.org>
Date: Thu, 29 Sep 2011 20:14:39 -0500
To: <gmclist@temp.gmcnet.org>
Subject: Re: [GMCnet] seeking permission

>
>
>FWIW, we have a water jet.
>--
>Bill Brown - '77 Buckeye Cruiser
>Coshocton OH
>carguybill@sbcglobal.net
>_______________________________________________
>GMCnet mailing list
>Unsubscribe or Change List Options:
>http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

-- Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net

Report message to a moderator

Re: seeking permission [message #145169 is a reply to message #145048]

Sat, 01 October 2011 15:04

Hardie Johnson

Messages: 483
Registered: January 2004
Location: Raleigh NC

Karma: 0

Senior Member

To view ACAD (dxf or dwg) files for free, go to
http://www.solidworks.com/sw/support/downloads.htm
and download Draftsight. It will give you the full functionality of ACAD for free.
Most outline cutting machines can be driven from these files.

Hardie Johnson "Crashj"
1973 26 foot Glacier, White Thing
Raleigh NC

Report message to a moderator

Re: [GMCnet] seeking permission [message #145204 is a reply to message #145169]

Sat, 01 October 2011 20:45

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Hardie,

This is a great program, thanks for providing the link!

Regards,
Rob M.

-----Original Message-----
From: Hardie Johnson

To view ACAD (dxf or dwg) files for free, go to
http://www.solidworks.com/sw/support/downloads.htm
and download Draftsight. It will give you the full functionality of ACAD for free.
Most outline cutting machines can be driven from these files.

Hardie

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

[GMCnet] Lights [message #146106 is a reply to message #145169]

Mon, 10 October 2011 20:37

Messages: 16
Registered: September 2011

Karma: 0

Junior Member

I've been troubleshooting my Electro-level II system, new air bags (4 bag
system) installed. The Right side leaks down. Drawing on other's
experience, should I keep hunting leaks, or just replace all the air hoses
to the right side? If replacing hoses, does anyone have a source for color
coded air hose?

Edward Botwinik
1978 Palm Beach 403

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Lights [message #146107 is a reply to message #146106]

Mon, 10 October 2011 20:48

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Do not replace the hoses unless you find one that is damaged. Replace the ends of the hoses with brass connectors from Parker. You can find the connectors at a good auto parts store or also at NAPA for double the price.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: [GMCnet] Lights [message #146119 is a reply to message #146107]

Mon, 10 October 2011 21:50

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

We carry all the colors of tubing.
Sometimes the leak is in the solenoid valves when rust gets on the valve seal.
It takes a spanner wrench to open and check only the ones on that side.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Re: seeking permission [message #146135 is a reply to message #145048]

Tue, 11 October 2011 07:14

Erv Troyer

Messages: 125
Registered: February 2004
Location: Lagrange, IN

Karma: 0

Senior Member

On Thu, 29 September 2011 20:04 Brian (chasingsummer@triad.rr.com) wrote:
>>>>>>>>>>>>>>>>>>>>
i received a responce reference to auto cad file.
after searching i see that the henry davis site has a few. presently i am down loading software, which i hope will allow me to few these diagrams.
do i need henry davis's permission to share these files with someone?
if so, can anyone help me obtain that.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Brian,

Those AutoCAD drawings were originally done by me, and they are free for the taking. Some GMCers have modified these for their own coach, and added paint colors, etc.

Erv Troyer Lagrange, IN
74 Sequoia
reo43@aol.com

Report message to a moderator

Re: [GMCnet] Lights [message #146160 is a reply to message #146106]

Tue, 11 October 2011 10:02

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

There is wireless air which may be cheaper

Gene

FREE WIFI @ Mickey D

On Oct 10, 2011, at 6:37 PM, Ed <edb_us@hotmail.com> wrote:

> I've been troubleshooting my Electro-level II system, new air bags (4 bag
> system) installed. The Right side leaks down. Drawing on other's
> experience, should I keep hunting leaks, or just replace all the air hoses
> to the right side? If replacing hoses, does anyone have a source for color
> coded air hose?
>
> Edward Botwinik
> 1978 Palm Beach 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: seeking permission [message #146166 is a reply to message #145169]

Tue, 11 October 2011 11:54

fred v

Messages: 999
Registered: April 2006
Location: pensacola, fl.

Karma: 0

Senior Member

Hardie Johnson wrote on Sat, 01 October 2011 15:04

i cannot find Draftsight on that page.???

Fred V
'77 Royale RB 455
P'cola, Fl

Report message to a moderator

Re: [GMCnet] seeking permission [message #146169 is a reply to message #146166]

Tue, 11 October 2011 12:46

Dave Mumert

Messages: 272
Registered: February 2004
Location: Olds, AB, Canada

Karma: 0

Senior Member

Try here for the SolidWorks free CAD package
http://preview.tinyurl.com/3nsepe8

Or here for the SolidEdge free package
http://preview.tinyurl.com/4xg8arm

I actually prefer the SolidEdge software but I suspect that is because what
I learned first, both are very complete 2D CAD systems.

Dave

> Subject: Re: [GMCnet] seeking permission
>
> Hardie Johnson wrote on Sat, 01 October 2011 15:04
> > To view ACAD (dxf or dwg) files for free, go to
> > http://www.solidworks.com/sw/support/downloads.htm
> > and download Draftsight. It will give you the full functionality of ACAD
for
> free.
> > Most outline cutting machines can be driven from these files.
>
> i cannot find Draftsight on that page.???
>
> --
> Fred V

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	[GMCnet] Surge Protector
Next Topic:	[GMCnet] wanted: 16" rims and tires for sale

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 15:47:47 CST 2024

Total time taken to generate the page: 0.01983 seconds