Home » Public Forums » GMCnet » [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm.
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143269 is a reply to message #143261] |
Tue, 13 September 2011 21:53 |
Wayne
Messages: 106 Registered: August 2004
Karma: 0
|
Senior Member |
|
|
Hi,
Get in touch with Dave.
Dave Lenzi
- 810-653-3902 Steereing components, leveler linkage, leveler valve rebuilding, embossed copper exhaust gasket.
Idler Arm
Re-built Idler Arm made from your existing arm. The rubber bushing is removed from the cross member pivot end. This end is machined and fitted with an Ampco bronze bushing, hardened sleeve, thrust washers, and a grease fitting. The ball stud end is cut apart; a new urethane bushing is installed. A new threaded cap with thrust washer and grease fitting is installed.
$200.00 plus shipping.
I am as cheap as they come and I say its worth the money. This was the major cause of my road wander.
Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143283 is a reply to message #143267] |
Wed, 14 September 2011 07:05 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
jimk wrote on Tue, 13 September 2011 21:46 | Did you ever try Applied GMC?
We carry most everything.
Go to our site.
On Tue, Sep 13, 2011 at 10:28 PM, steve <mr34@pipeline.com> wrote:
> Hi
>  The Pittman arm in my 23 ft  Birch is 13 and half inches wide and is
> pretty lose and I don't want to chance driving it.
> will be willing to pay top dollar....
> Â I Checked with local parts stores. And also GM Â Dealers And had no
> luck:-(
>
> Steve
> 78 Birch \
> Helena
> Mt,
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
|
Even though Jim is out here at the rally, the above TELEPHONE number still works and I guarantee that Nick at Applied GMC will answer and help you.
Jim K. has them. 1-800-752-7502
http://www.appliedgmc.com/level.itml/icOid/484
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143289 is a reply to message #143283] |
Wed, 14 September 2011 08:49 |
Steve Phillips
Messages: 63 Registered: February 2004
Karma: 0
|
Member |
|
|
Hi Al
I made an error in measuring the Pittman Arm on my 23 Birch , it
should be 19 inches long.
It sound like I should be able to get one from on the net, which will
make me a Happy camper.
Steve
78 Birch
Helena
Mt
On 9/14/2011 6:05 AM, Ken Burton wrote:
>
> jimk wrote on Tue, 13 September 2011 21:46
>> Did you ever try Applied GMC?
>> We carry most everything.
>> Go to our site.
>>
>>
>>
>>
>>
>>
>> On Tue, Sep 13, 2011 at 10:28 PM, steve<mr34@pipeline.com> wrote:
>>> Hi
>>>  The Pittman arm in my 23 ft  Birch is 13 and half inches wide and is
>>> pretty lose and I don't want to chance driving it.
>>> will be willing to pay top dollar....
>>> Â I Checked with local parts stores. And also GM Â Dealers And had no
>>> luck:-(
>>>
>>> Steve
>>> 78 Birch \
>>> Helena
>>> Mt,
>>
>> Jim Kanomata
>> Applied/GMC, Fremont,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
> Even though Jim is out here at the rally, the above TELEPHONE number still works and I guarantee that Nick at Applied GMC will answer and help you.
>
> Jim K. has them. 1-800-752-7502
>
> http://www.appliedgmc.com/level.itml/icOid/484
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143291 is a reply to message #143289] |
Wed, 14 September 2011 09:01 |
peter bailey
Messages: 367 Registered: March 2009 Location: Gawler, South Australia
Karma: 0
|
Senior Member |
|
|
I am confused with the measurement of the Pitman Arm which is the arm
directly off the steering box which is no where near 19' long, should this
reference be the Drag Link?.
Peter Bailey
from Ozy (Aussie)
----- Original Message -----
From: "steve" <mr34@pipeline.com>
To: <gmclist@temp.gmcnet.org>
Sent: Wednesday, September 14, 2011 11:19 PM
Subject: Re: [GMCnet] Need a pitman arm // summer is about over and I hope I
can find a new pitmanarm.
Hi Al
I made an error in measuring the Pittman Arm on my 23 Birch , it
should be 19 inches long.
It sound like I should be able to get one from on the net, which will
make me a Happy camper.
Steve
78 Birch
Helena
Mt
On 9/14/2011 6:05 AM, Ken Burton wrote:
>
> jimk wrote on Tue, 13 September 2011 21:46
>> Did you ever try Applied GMC?
>> We carry most everything.
>> Go to our site.
>>
>>
>>
>>
>>
>>
>> On Tue, Sep 13, 2011 at 10:28 PM, steve<mr34@pipeline.com> wrote:
>>> Hi
>>>  The Pittman arm in my 23 ft  Birch is 13 and half inches wide and is
>>> pretty lose and I don't want to chance driving it.
>>> will be willing to pay top dollar....
>>> Â I Checked with local parts stores. And also GM Â Dealers And had no
>>> luck:-(
>>>
>>> Steve
>>> 78 Birch \
>>> Helena
>>> Mt,
>>
>> Jim Kanomata
>> Applied/GMC, Fremont,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
> Even though Jim is out here at the rally, the above TELEPHONE number still
> works and I guarantee that Nick at Applied GMC will answer and help you.
>
> Jim K. has them. 1-800-752-7502
>
> http://www.appliedgmc.com/level.itml/icOid/484
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1392 / Virus Database: 1520/3895 - Release Date: 09/13/11
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143413 is a reply to message #143289] |
Wed, 14 September 2011 20:06 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Steve,
I think that we need to get the steering linkage defined. Mant Man.
X-7525B, Section 9, Page 9-1, Fig 1 Show the layout of the linkage.
The Pitman Arm is the piece that is connect directly to the steering
box. The Drag Link is connected between the pitman and the relay
lever. The relay lever is connected to the intermediate Rod which is
supported on the passenger side by the idler arm. On either end of
the intermediate rod are the tie rod assemblies. The piece that you
appear to be describing is the drag link which is approximately 19 or
so inches long. Chances of finding one in good condition used is slim
and none. The Jim's may have a NOS unit or a used for sale every now
and then. Jim K sell the Dave Lenzi front end pieces and they are
better than new as they are beefed up and the drag link are now
adjustable. http://www.appliedgmc.com/prod.itml/icOid/653
J.R. Wright
GMC GreatLaker
78 Buskirk 30' Stretch
1975 Avion (Under Reconstruction)
Michigan
On Sep 14, 2011, at 9:49 AM, steve wrote:
> Hi Al
>
> I made an error in measuring the Pittman Arm on my 23 Birch , it
> should be 19 inches long.
>
> It sound like I should be able to get one from on the net, which will
> make me a Happy camper.
>
> Steve
> 78 Birch
> Helena
> Mt
>
> On 9/14/2011 6:05 AM, Ken Burton wrote:
>>
>> jimk wrote on Tue, 13 September 2011 21:46
>>> Did you ever try Applied GMC?
>>> We carry most everything.
>>> Go to our site.
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Sep 13, 2011 at 10:28 PM, steve<mr34@pipeline.com> wrote:
>>>> Hi
>>>>  The Pittman arm in my 23 ft  Birch is 13 and half inches wide
>>>> and is
>>>> pretty lose and I don't want to chance driving it.
>>>> will be willing to pay top dollar....
>>>> Â I Checked with local parts stores. And also GM Â Dealers And
>>>> had no
>>>> luck:-(
>>>>
>>>> Steve
>>>> 78 Birch \
>>>> Helena
>>>> Mt,
>>>
>>> Jim Kanomata
>>> Applied/GMC, Fremont,CA
>>> jimk@appliedairfilters.com
>>> http://www.appliedgmc.com
>>> 1-800-752-7502
>> Even though Jim is out here at the rally, the above TELEPHONE
>> number still works and I guarantee that Nick at Applied GMC will
>> answer and help you.
>>
>> Jim K. has them. 1-800-752-7502
>>
>> http://www.appliedgmc.com/level.itml/icOid/484
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143442 is a reply to message #143261] |
Wed, 14 September 2011 22:08 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Yes the Pitman arm on our coaches is a "dumb" piece in that it has no joints or wear items. The drag link has 2 smart business ends. The relay lever has one dumb end to accept the drag link and a smart end to attach to the center link, which is totaly "dumb" as no wear joints. Buy the Drag link from Dave L as it has bigger heavier duty ends and adjustable length so you can center the relay and idler to straight ahead with the tierods whlie setting toe, and then get the box on high point (steering wheel straight) with the adjustable drag link. All Daves products are true crafted pieces. The GM drag link should have been the heavier type Dave sells judging by how many are worn.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143455 is a reply to message #143291] |
Wed, 14 September 2011 23:40 |
Steve Phillips
Messages: 63 Registered: February 2004
Karma: 0
|
Member |
|
|
Pete
Sorry about saying the Pittman arm are in my e-mail I sent i really
meant THE DRAG LINK.
Steve
78 Birch
On 9/14/2011 8:01 AM, Peter Bailey wrote:
> I am confused with the measurement of the Pitman Arm which is the arm
> directly off the steering box which is no where near 19' long, should this
> reference be the Drag Link?.
> Peter Bailey
> from Ozy (Aussie)
> ----- Original Message -----
> From: "steve"<mr34@pipeline.com>
> To:<gmclist@temp.gmcnet.org>
> Sent: Wednesday, September 14, 2011 11:19 PM
> Subject: Re: [GMCnet] Need a pitman arm // summer is about over and I hope I
> can find a new pitmanarm.
>
>
> Hi Al
>
> I made an error in measuring the Pittman Arm on my 23 Birch , it
> should be 19 inches long.
>
> It sound like I should be able to get one from on the net, which will
> make me a Happy camper.
>
> Steve
> 78 Birch
> Helena
> Mt
>
> On 9/14/2011 6:05 AM, Ken Burton wrote:
>> jimk wrote on Tue, 13 September 2011 21:46
>>> Did you ever try Applied GMC?
>>> We carry most everything.
>>> Go to our site.
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Tue, Sep 13, 2011 at 10:28 PM, steve<mr34@pipeline.com> wrote:
>>>> Hi
>>>>  The Pittman arm in my 23 ft  Birch is 13 and half inches wide and is
>>>> pretty lose and I don't want to chance driving it.
>>>> will be willing to pay top dollar....
>>>> Â I Checked with local parts stores. And also GM Â Dealers And had no
>>>> luck:-(
>>>>
>>>> Steve
>>>> 78 Birch \
>>>> Helena
>>>> Mt,
>>> Jim Kanomata
>>> Applied/GMC, Fremont,CA
>>> jimk@appliedairfilters.com
>>> http://www.appliedgmc.com
>>> 1-800-752-7502
>> Even though Jim is out here at the rally, the above TELEPHONE number still
>> works and I guarantee that Nick at Applied GMC will answer and help you.
>>
>> Jim K. has them. 1-800-752-7502
>>
>> http://www.appliedgmc.com/level.itml/icOid/484
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1392 / Virus Database: 1520/3895 - Release Date: 09/13/11
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
Re: [GMCnet] Need a pitman arm // summer is about over and I hope I can find a new pitmanarm. [message #143473 is a reply to message #143442] |
Thu, 15 September 2011 08:03 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Steve, What you need is one of our catalogs for reference.
Call our Office for our Free catalog.
Correct parts are what were about and we have people that can help you
6 days a week.
On Wed, Sep 14, 2011 at 11:08 PM, John R. Lebetski <gransport@aol.com> wrote:
>
>
> Yes the Pitman arm on our coaches is a "dumb" piece in that it has no joints or wear items. Â The drag link has 2 smart business ends. The relay lever has one dumb end to accept the drag link and a smart end to attach to the center link, which is totaly "dumb" as no wear joints. Buy the Drag link from Dave L Â as it has bigger heavier duty ends and adjustable length so you can center the relay and idler to straight ahead with the tierods whlie setting toe, and then get the box on high point (steering wheel straight) with the adjustable drag link. Â All Daves products are true crafted pieces. The GM drag link should have been the heavier type Dave sells judging by how many are worn.
> --
> John Lebetski
> Chicago, IL
> 77 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
Goto Forum:
Current Time: Mon Oct 21 10:13:44 CDT 2024
Total time taken to generate the page: 0.05186 seconds
|