[GMCnet] Onan backfire diagnostics [message #143049] |
Mon, 12 September 2011 02:12 |
Douglas Norton
Messages: 191 Registered: April 2008
Karma:
|
Senior Member |
|
|
So, my Onan quit during a 15 minute test run and would not restart except to backfire a lot. It backfired a couple of times and quit and would not start. I added fuel to the tank and it started but after a minute it began to kick and backfire. I changed plugs but the old ones had 15 minutes on them. The were very white and clean. The gen was running very hot too. I checked fuel and the pump put out 4 ounces in under 30 seconds. That works out to over 4 gallons an hour or many times possible demand.
The backfires came out the exhaust, some with flames, some black, some white, and some very loud. Before looking for a stuck valve or problem ignition, I will look to cleaning the carb.
1. If I am on the right track and will I need a kit?
2. are rebuilt Onan carbs available (Jim K is my first choice for a source if I fail a rebuild)
3. Some unnamed diy mechanic forgot he removed the fuel filter while making an emergency fuel line replacement a couple of years ago; do you think that mattered?
4. would a petronix upgrade be worth it?
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|