|
Re: [GMCnet] general front end alignment question [message #142670 is a reply to message #142641] |
Wed, 07 September 2011 09:16 |
philipswanson
Messages: 282 Registered: January 2004
Karma: 0
|
Senior Member |
|
|
For now, have them set everything straight up but you are wasting your money on an alignment if you have not had the front end checked thoroughly for problems. You also want to maximize castor but if parts are loose, nothing will help but to replace them first. Offset control arm busings will help too if you have done the rest but only then.
Phil Swanson
|
|
|