Home » Public Forums » GMCnet » NON GMC, NOT AT ALL, looking for truck part (Seeking the CAR Guys in the know for a part supplies at a decent price)
| NON GMC, NOT AT ALL, looking for truck part [message #141703] |
Tue, 30 August 2011 12:27  |
Larry C
Messages: 1168
Registered: July 2004
Location: NE Illinois by the Illino...
Karma:
|
Senior Member |
|
|
First, I apologize for interrupting the GMC RV string.
Some months back, I took my 1986 CHEVROLET K10 Custom Delux pickup with a 5.0 Liter engine from storage.
If anything is an example why vehicles must be driven, it was the rusty condition that it was in when I brought it home. It was only stored a few years but it might as well have been a decade.
I have replaced and POR15'd rust like crazy to try to restore some service life back to the truck, yes, I do have an attachment to it. I had to replace both front inner FENDER WELLS as they were metal and rusted through. The replacements look pretty good and was a great improvement to the truck.
But, when I had the Passenger side Inner Wheel Well off, I found the RADIATOR SUPPORT had rusted through, it failed and the radiator had dropped a half inch. This is the ONLY structural body part that is bad and as this truck runs like it was just off the assembly line, well she runs really sweet-hows that? , I have decided to try to find a replacement. It only bolts in so it seems to be a task I might take on. After a few of the GMC projects, this one should fit right in to the craziness, you think?
The Truck has the 4 headlamp system and I may be interested in the bolt mounting system as well, else I will cut the bolts and replace from ACE IS THE PLACE, hardware.
The biggest problem seems to be they will sell the part but they want a fortune for the shipping. I have determined I will not replace this body part until next year, the radiator has been supported around the failure so time is on my side, for once.
If any of you car guys have any places that commonly offer parts at a decent price, I'd appreciate any assistance.
You could answer here, or send me an Email.
SLAWRENCE111 (@) YAHOO (dot) COM
Thanks guys, I know this isn't really GMC related so pardon my interuption. 
Gatsbys' CRUISER  08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
|
 |
|
NON GMC, NOT AT ALL, looking for truck part
By: Larry C on Tue, 30 August 2011 12:27 |
|
|
Re: [GMCnet] NON GMC, NOT AT ALL, looking for truck part
|
|
|
Re: NON GMC, NOT AT ALL, looking for truck part
By: Don A on Tue, 30 August 2011 15:52 |
|
|
Re: NON GMC, NOT AT ALL, looking for truck part
|
|
|
Re: NON GMC, NOT AT ALL, looking for truck part
By: Larry C on Wed, 31 August 2011 17:09 |
Goto Forum:
Current Time: Wed Oct 30 10:19:34 CDT 2024
Total time taken to generate the page: 0.01247 seconds
|
GMCforum
Search
Help
Register
Login
Home
