| cruise troubleshooting assistance sought [message #141349] |
Sun, 28 August 2011 13:19  |
chasingsummer
Messages: 434
Registered: May 2011
Location: asheboro, nc
Karma:
|
Senior Member |
|
|
figure 59 on page 12-43 of 75-76 m.m.
first i disconnect brake switch as to not induce new problem.
i can put 12vdc on transducer at e/d brown wire and hear selonoid fire. i can also read the 40 ohms across this brown wire from transducer plug and plug at engage switch.
if i put the same 12vdc on brown wire which was removed from brake switch, and i activate engage switch, then shouldnt i also hear coil fire?
i put 12vdc on brown/white wire at engage switch which should be output of engage switch and i also dont hear coil fire.
any help and input is appreciated
bgk
brian
asheboro, nc
75 eleganza, 74 build
119k miles and counting,
DOG HOUSE
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
