| [GMCnet] GMC alignment kit and instructions now complete [message #141277] |
Sat, 27 August 2011 19:17  |
glwgmc
Messages: 1014
Registered: June 2004
Karma:
|
Senior Member |
|
|
Hi Gary,
The kit will work with any coach that has Alcoa wheels whether stock front end, hub spacers, one ton conversion, disk brake rears, reaction arm, etc. I did not make it to fit the old steel wheels. A user could make their own standoff plates to fit steel wheels if they want to, but most are so bent and warped that I'm not sure you could get a good indication of the plane where the rim is supposed to be, so aligning to a bad planer surface would not produce a good result. Hence, I won't make standoffs for those old 16.5 wheels.
See you at SOOR.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
Visitors always welcome!
glwork@mac.com
http://jerrywork.com
541-592-5360
Founder of the Southern Oregon Guild
www.southernoregonguild.org
Member of the Siskiyou Guild
www.siskiyouguild.org
---------------------------
Message: 11
Date: Sat, 27 Aug 2011 10:27:08 -0700
From: Gary Berry <duallycc@gmail.com>
Subject: Re: [GMCnet] GMC alignment kit and instructions now complete
To: gmclist@temp.gmcnet.org
Message-ID:
<CADgJ_HTo+xdxKiZ9L+7Y79aW3U3yZxPFOJ_0BrLNvbAK7Zs5Xw@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
Hey Jerry;
I haven't looked at your manual as yet but I have a question. Will
this kit work with either the stock components (both front and rear)
or if you have updated components (like 1-ton frontend, rear disc
brakes, reaction arm, etc)? Hope to see you at the SOOR.
--
Gary and Diana Berry
73 CL Stretch in Wa.
-------------------------------------------
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
