GMCforum: GMCnet » Thermo Vacuum Switch (TVS) question

Home » Public Forums » GMCnet » Thermo Vacuum Switch (TVS) question

Show: Today's Messages :: Polls :: Message Navigator

Thermo Vacuum Switch (TVS) question [message #140243]

Sat, 20 August 2011 18:58

larry.whisler

Messages: 356
Registered: August 2005

Karma:

Senior Member

I have heard that doing away/by passing the TVS is the way to go on these coaches.

So what is the "proper" way to plumb these vacuum lines when doing so?

There are 3 ports on the switch ( carb, vacuum advance, and tee line that goes to manifold and trans ).

If I run the spark advance directly to the ported spark port on the carb, I am left with an open port on the switch.

Per the manual, the TVS allows vacuum advance after the engine has reached operating temp.

And if anyone knows what the other ports do, I'd appreciate the knowledge.

larry whisler

Report message to a moderator

[Message index]

		Thermo Vacuum Switch (TVS) question By: larry.whisler on Sat, 20 August 2011 18:58
		Re: Thermo Vacuum Switch (TVS) question By: armandminnie on Sat, 20 August 2011 19:09
		Re: Thermo Vacuum Switch (TVS) question By: armandminnie on Sat, 20 August 2011 19:12
		Re: Thermo Vacuum Switch (TVS) question By: C Boyd on Sat, 20 August 2011 20:06
		Re: Thermo Vacuum Switch (TVS) question By: Chr$ on Sat, 20 August 2011 22:48
		Re: Thermo Vacuum Switch (TVS) question By: Ken Burton on Sun, 21 August 2011 04:03
		Re: Thermo Vacuum Switch (TVS) question By: larry.whisler on Sun, 21 August 2011 10:11
		Re: Thermo Vacuum Switch (TVS) question By: C Boyd on Sun, 21 August 2011 10:19
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: Billy Massey on Sun, 21 August 2011 10:28
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: larry.whisler on Sun, 21 August 2011 13:16
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: Dave Mumert on Sun, 21 August 2011 13:46
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: jhbridges on Sun, 21 August 2011 16:38
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: James Hupy on Sun, 21 August 2011 14:17
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: jhbridges on Sun, 21 August 2011 16:39
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: Jim Bounds on Mon, 22 August 2011 07:31
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: Ken Burton on Mon, 22 August 2011 00:37
		Re: [GMCnet] Thermo Vacuum Switch (TVS) question By: Mr ERFisher on Sun, 21 August 2011 04:53
		Re: Thermo Vacuum Switch (TVS) question By: JohnL455 on Sun, 21 August 2011 13:22
		Re: Thermo Vacuum Switch (TVS) question By: Chr$ on Sun, 21 August 2011 18:44

Previous Topic:	[GMCnet] Electrical problem...
Next Topic:	double alt pulley belts?

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 15:35:27 CST 2024

Total time taken to generate the page: 0.01088 seconds