GMCforum: GMCnet » Bathroom Module Attachment

Home » Public Forums » GMCnet » Bathroom Module Attachment

Show: Today's Messages :: Polls :: Message Navigator

Bathroom Module Attachment [message #140198]

Sat, 20 August 2011 11:48

bhayes

Messages: 263
Registered: March 2010

Karma: 1

Senior Member

I have the back area of my Eleganza "under construction" after replacing some rotted floor boards, and noticed that there's an angle bracket that attaches to the bathroom module framing and ceiling, as shown in this picture:

http://www.gmcmhphotos.com/photos/showphoto.php?photo=40240&title=dscf0132&cat=500

or

http://bit.ly/lmHycD

Is this how GMC attached the framing to the ceiling, or is this something a PO put in? Also, the fastener that attached the angle bracket to the ceiling is missing. Does anyone have any suggestions on what to use?

I ask this because the hole for the fan in my bathroom ceiling does not align with the fan. See this picture:

http://www.gmcmhphotos.com/photos/showphoto.php?photo=40241&title=dscf0133&cat=500

or

http://bit.ly/nDWFGm

I can push the bathroom module towards the wall and get it to align somewhat, but I don't have a good way of keeping the module in place.

Bryan Hayes
'76 Eleganza II
Salt Lake City, Utah

Report message to a moderator

Previous Topic:	Rear end Ride Height
Next Topic:	Re: [GMCnet] body restoration progress photos

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 30 01:19:29 CDT 2024

Total time taken to generate the page: 0.00724 seconds