GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMC Swap Meet » WANTED - house water lighted rocker switch (Original type)
WANTED - house water lighted rocker switch [message #139307] Mon, 15 August 2011 16:16 Go to next message
carguy is currently offline  carguy   United States
Messages: 498
Registered: June 2006
Location: Coshocton OH
Karma: 0
Senior Member

I am looking for an original lighted house water pump switch.

Bill Brown - '77 Buckeye Cruiser
Coshocton OH
carguybill@sbcglobal.net
Re: WANTED - house water lighted rocker switch [message #140585 is a reply to message #139307] Tue, 23 August 2011 02:35 Go to previous messageGo to next message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
Bill, Those usually can be repaired. If you do not find a new one, ask me at the GMCMI rally to take yours apart.

Ken Burton


Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Re: WANTED - house water lighted rocker switch [message #140686 is a reply to message #139307] Tue, 23 August 2011 18:52 Go to previous messageGo to next message
carguy is currently offline  carguy   United States
Messages: 498
Registered: June 2006
Location: Coshocton OH
Karma: 0
Senior Member

Thanks Ken, but mine is working fine. I'm looking for another one to install in the head. Bill

Bill Brown - '77 Buckeye Cruiser
Coshocton OH
carguybill@sbcglobal.net
Re: WANTED - house water lighted rocker switch [message #140851 is a reply to message #140686] Thu, 25 August 2011 00:00 Go to previous message
Ken Burton is currently offline  Ken Burton   United States
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
Senior Member
OK, I thought yours was broken. If you do not find one, you could get a small lighted rocker from AutoZone or Radio Shack for under $5.00. You'll have to run one additional ground wire to it to get the internal light to work.

Here is the one I'm thinking of from Radio Shack. This one mounts by drilling one hole.

http://www.radioshack.com/product/index.jsp?productId=2103602




Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
Previous Topic: Curtis Body Pads
Next Topic: DODGE RIMS
Goto Forum:
  


Current Time: Tue Oct 01 14:27:27 CDT 2024

Total time taken to generate the page: 0.02955 seconds