GMCforum: GMCnet » [GMCnet] Need a relay lever core

Home » Public Forums » GMCnet » [GMCnet] Need a relay lever core

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Need a relay lever core [message #138885]

Sat, 13 August 2011 12:59

Kirk

Messages: 80
Registered: April 2008

Karma: 0

Member

Apparently I have an aftermarket relay lever installed which Dave Lenzi
can't rebuild. I'm looking for a rebuildable OEM relay lever. <<<You can
determine if your core is an original by checking to see that it only has
one grease fitting on it. It will be at the pivot point where it attaches to
the cross member. If yours has another grease fitting at the ball stud end
where the intermediate rod attaches, it is an aftermarket.>>> Dave is
looking for one too, I would appreciate any leads. Thanks,

Kirk - 49ers - N. Nevada
NdnKirk at Gmail dot com

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Kirk & Eloise Yeager - Motorcyclists/RVers/Dog Lovers - 77 Royale 455/TBI/3:55 - 49ers - N. Nevada - NdnKirk at Gmail dot com

Report message to a moderator

Re: [GMCnet] Need a relay lever core [message #138893 is a reply to message #138885]

Sat, 13 August 2011 14:22

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

Try GEMRECs, thats where I got mine

TZE@gemrec.com

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

[Updated on: Sat, 13 August 2011 14:24]

Report message to a moderator

Previous Topic:	fantastic fan problem
Next Topic:	Duracool revisted

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Oct 07 14:32:41 CDT 2024

Total time taken to generate the page: 0.00937 seconds