| Bath Fan Cutouts/ Carrier V low profile [message #138842] |
Sat, 13 August 2011 09:24  |
petemosss
Messages: 221
Registered: August 2008
Location: Jacksonville, Florida
Karma: 0
|
Senior Member |
|
|
Hey all, Looking for the pics or numbers for a 14 x 14 cutout for a bath fan. Cant seem to get through normal birdfeeder search. googling site wasn't much better.
Chri$ or anyone else: What was the clearance issue with the fantastic fan and the a/c unit?
Thanks! Pete
Pete
74 Canyon Lands 26' "Emery"
|
|
|
|
| Re: Bath Fan Cutouts/ Carrier V low profile [message #138879 is a reply to message #138842] |
Sat, 13 August 2011 12:31  |
GeorgeRud
Messages: 1380
Registered: February 2007
Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
The Carrier Low Profile unit is longer than most AC units, so it sits back a bit further than the original AC.
If you remove the original bathroom fan, you can check to see how much room you have to mount the 14x14" fan - I don't think there is much wiggle room.
I'm going through the same issues with my coach as I have a Carrier Low Profile and would like to put a Fantastic Fan in the bath. To further complicate things, I also have to check the positioning of the fridge vent and ladder rails before making any cuts. I would try to dry fit things before cutting holes in the roof as these things can be tight up there.
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
