[GMCnet] Alternator belt adjustor [message #137382] |
Wed, 03 August 2011 20:13 |
Thomas Pryor
Messages: 143 Registered: January 2011
Karma: 1
|
Senior Member |
|
|
Hi folks,
The alternator adjustor I have developed is now shown on the Jim K site as well as the Jeff Sirrum site. Jim B to follow shortly. The heart of my system is a patented gimballed drive block device that allows for all degrees of alignment.
The system requires only two common wrenches & no modifications the original GMC design. This this Adjustor is useful for both 403 & 455 as well as many other applications using the elliptical slot design.
I'm a past automotive engineer who retired in 2006 and hold the patent on the gimballed drive block mentioned earlier. Both the alternator belt adjustor and the similar
Design for the air compressor will be available in production quantities by Aug 15 thru the JIM'S and ALEX S.
I aquired a 1977 23 Birchaven and have invested untold numbers hours & dollars with Jim K, Jim B and Alex Sirrum. The mechanicals will be completed by mid sept, ready for a "barebones" ride close to home in Lake Wales, Fl
PLEASE Honor The development rights you would give any other GMC owner who tries to help the hobby.
Sent from my iPhone
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
Re: [GMCnet] Alternator belt adjustor [message #140499 is a reply to message #137403] |
Mon, 22 August 2011 17:41 |
|
mike miller
Messages: 3576 Registered: February 2004 Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
Mr ERFisher wrote on Wed, 03 August 2011 20:14 | On Wed, Aug 3, 2011 at 6:13 PM, Tom Pryor <tepryor@gmail.com> wrote:
> ....
> is now shown on the Jim K site as well as the Jeff Sirrum
> site. Jim B to follow shortly. The heart of my system is a
> patented gimballed drive block device that allows for all
> degrees of alignment. The system requires only two common
> wrenches & no modifications the original GMC design. This
> this Adjustor is useful for both 403 & 455 as well
> as many other applications...
cannot seem to find the link
|
<http://www.appliedgmc.com/prod.itml/icOid/1107>
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
Re: [GMCnet] Alternator belt adjustor [message #140505 is a reply to message #140499] |
Mon, 22 August 2011 17:53 |
Mr ERFisher
Messages: 7117 Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Not that one, the sirum link
FREE WIFI @ Mickey D
On Aug 22, 2011, at 3:41 PM, Mike Miller <m000035@gmail.com> wrote:
>
>
> Mr ERFisher wrote on Wed, 03 August 2011 20:14
>> On Wed, Aug 3, 2011 at 6:13 PM, Tom Pryor <tepryor@gmail.com> wrote:
>>> ....
>>> is now shown on the Jim K site as well as the Jeff Sirrum
>>> site. Jim B to follow shortly. The heart of my system is a
>>> patented gimballed drive block device that allows for all
>>> degrees of alignment. The system requires only two common
>>> wrenches & no modifications the original GMC design. This
>>> this Adjustor is useful for both 403 & 455 as well
>>> as many other applications...
>>
>> cannot seem to find the link
>
>
> <http://www.appliedgmc.com/prod.itml/icOid/1107>
> --
> Mike Miller -- Hillsboro, OR -- on the Black list
> (#1)'73 26' exPainted D. -- (#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
> http://m000035.blogspot.com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|