Yandia Combiner [message #134906] |
Sun, 17 July 2011 08:28  |
 |
cbwoodsr
 Messages: 1063 Registered: February 2004
Karma: 0
|
Senior Member |
|
|
Put a new one on, works but what is the blue and green wire for??
Only got Yandia instructions with it and it didnt mention them.
CBWood
77 Kingslay
MWC OK
ONLINE PARTS PROGRAM
www.GMCMHParts.com
|
|
|
|
|
|
|
|
Re: Yandia Combiner [message #134977 is a reply to message #134906] |
Sun, 17 July 2011 22:09  |
zhagrieb
 Messages: 676 Registered: August 2009 Location: Portland Oregon
Karma: 0
|
Senior Member |
|
|
Both green and blue are normally not used.
The green is for a remote control switch should you desire. You can connect a SPDT (center off) switch with the green to the common terminal, ground to one side, 12V to the other. 12V to the green wire will lock the combiner on, grounding the green will lock it off. In the center position the combiner operation is automatic.
The blue is only used when the charging circuit has no controlled voltage limits. It will protect gel cells by shutting the combiner off if voltage exceeds 14.2.
Glenn
Glenn Giere, Portland OR, K7GAG
'73 "Moby the Motorhome" 26'
[Updated on: Sun, 17 July 2011 22:33] Report message to a moderator
|
|
|