| Onan Oil Pressure Switch [message #132520] |
Tue, 28 June 2011 20:53  |
hal kading
Messages: 642
Registered: February 2004
Location: Las Cruces NM
Karma: 4
|
Senior Member |
|
|
My Onan started leaking oil profusely this afternoon from the oil pressure shutdown switch. Not sure I'll find the ones listed in the 2008 interchange book here in Cody WY. What is the VW application that will fit? Onan is a 6 KW.
Hal Kading 77 Kingsley 455 (Old Faithful) spending a few days in Cody before heading to Southern WI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Onan Oil Pressure Switch [message #132538 is a reply to message #132528] |
Tue, 28 June 2011 21:22  |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Emery,
You've inadvertently provided conflicting information below see *****. I
believe the 1/8 x 27 is correct.
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Emery Stora
Sent: Wednesday, 29 June 2011 12:05 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Onan Oil Pressure Switch
NAPA # OP6283 = Borg Warner # S310
Light Type 3 - 8.3 psi
****** 1/8 x 27 NPT ******
Chrysler 62 - 78 & 82 - 85
Jeep 55 - 59
Numerous other Chrysler products circa 70s -
NAPA OP6074 or OP6282.should also work.
It has has to be a ***** 1/4" x 27 NPT ****** (national pipe thread - it
must be tapered pipe thread) Be careful, some have 28 thread per inch bolt
thread and that will not work.
I bought one at Autozone once but I don't have the number.
Emery Stora
On Jun 28, 2011, at 7:53 PM, Hal Kading wrote:
>
>
> My Onan started leaking oil profusely this afternoon from the oil pressure
shutdown switch. Not sure I'll find the ones listed in the 2008 interchange
book here in Cody WY. What is the VW application that will fit? Onan is a 6
KW.
>
> Hal Kading 77 Kingsley 455 (Old Faithful) spending a few days in Cody
before heading to Southern WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Emery Stora
77 Kingsley
Santa Fe, NM
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Onan Oil Pressure Switch [message #132540 is a reply to message #132520] |
Tue, 28 June 2011 21:23 |
|
|
What is a replacement oil pressure switch for the Onan?
NAPA # OP6282 = Borg Warner # S310 (Light Type 3 - 8.3 psi, 1/8 x 27 NPT,
Chrysler 62 - 78 & 82 - 85, Jeep 55 - 59, numerous other Chrysler products
circa 70s - 80s. The switch cost $5.99; the socket to install it cost $4.99.
Don't forget to get the socket 'cause it's almost impossible to install the
switch without it & easy with it. (Ken Henderson 1-19-00)
-----Original Message-----
From: On Behalf Of Hal Kading
Sent: Tuesday, June 28, 2011 8:54 PM
Subject: [GMCnet] Onan Oil Pressure Switch
My Onan started leaking oil profusely this afternoon from the oil pressure
shutdown switch. Not sure I'll find the ones listed in the 2008 interchange
book here in Cody WY. What is the VW application that will fit? Onan is a 6
KW.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
bdub
bdub.net
|
|
|
|
| Re: [GMCnet] Onan Oil Pressure Switch [message #132543 is a reply to message #132538] |
Tue, 28 June 2011 21:53 |
emerystora
Messages: 4442
Registered: January 2004
Karma: 13
|
Senior Member |
|
|
Rob
You are correct. I should have typed 1/8 instead oc 1/4. Thanks for
catching that
Emery
On Jun 28, 2011, at 8:22 PM, Rob Mueller <robmueller@iinet.net.au>
wrote:
> Emery,
>
> You've inadvertently provided conflicting information below see
> *****. I
> believe the 1/8 x 27 is correct.
>
> Regards,
> Rob M.
> Sydney, Australia
> AUS '75 Avion-The Blue Streak TZE365V100428
> USA '75 Avion-Double Trouble TZE365V100426
>
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Emery Stora
> Sent: Wednesday, 29 June 2011 12:05 PM
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Onan Oil Pressure Switch
>
> NAPA # OP6283 = Borg Warner # S310
> Light Type 3 - 8.3 psi
> ****** 1/8 x 27 NPT ******
> Chrysler 62 - 78 & 82 - 85
> Jeep 55 - 59
> Numerous other Chrysler products circa 70s -
>
> NAPA OP6074 or OP6282.should also work.
>
> It has has to be a ***** 1/4" x 27 NPT ****** (national pipe thread
> - it
> must be tapered pipe thread) Be careful, some have 28 thread per
> inch bolt
> thread and that will not work.
>
> I bought one at Autozone once but I don't have the number.
>
> Emery Stora
>
> On Jun 28, 2011, at 7:53 PM, Hal Kading wrote:
>
>>
>>
>> My Onan started leaking oil profusely this afternoon from the oil
>> pressure
> shutdown switch. Not sure I'll find the ones listed in the 2008
> interchange
> book here in Cody WY. What is the VW application that will fit? Onan
> is a 6
> KW.
>>
>> Hal Kading 77 Kingsley 455 (Old Faithful) spending a few days in Cody
> before heading to Southern WI.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> Emery Stora
> 77 Kingsley
> Santa Fe, NM
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Onan Oil Pressure Switch installation [message #133064 is a reply to message #133063] |
Fri, 01 July 2011 22:46 |
GMCNUSA
Messages: 283
Registered: August 2006
Location: Indianapolis, IN
Karma: 0
|
Senior Member |
|
|
[quote title=peabody wrote on Fri, 01 July 2011 23:36]
If you cannot use a socket then how to install? What size socket is needed??
/quote]
My oil pressure Switch on the Onan leaked so I replaced it this spring and I don't recall any problems removing or installing. I have way too many tools so if it needed something special I don't remember, but it was easy.
Larry Dilk
Indianapolis, IN
76 Eleganza II
Patterson 455,Turbo City TBI,
Just LOVE It!
|
|
|
|
| Re: [GMCnet] Onan Oil Pressure Switch installation [message #133067 is a reply to message #133064] |
Fri, 01 July 2011 22:54 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Youn need to use a socket that is 12 point.
It can easily be damaged if you apply pressure to only 2-4 places on the sensor.
On Fri, Jul 1, 2011 at 8:46 PM, Larry and Cheryl Dilk <lwd222@msn.com> wrote:
>
>
> [quote title=peabody wrote on Fri, 01 July 2011 23:36]
> If you cannot use a socket then how to install? What  size socket is needed??
>
>
>
>
> /quote]
> My oil pressure Switch on the Onan leaked so I replaced it this spring and I don't recall any problems removing or installing. I have way too many tools so if it needed something special I don't remember, but it was easy.
> --
> Larry Dilk
> Indianapolis, IN
> 76 Eleganza II
> Patterson 455,Turbo City TBI,
> Just LOVE It!
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Onan Oil Pressure Switch installation [message #133145 is a reply to message #133063] |
Sat, 02 July 2011 21:23 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
ChannelLocks<tm>.
--johnny
--- On Sat, 7/2/11, bill schurman <lizzie1243@hotmail.com> wrote:
From: bill schurman <lizzie1243@hotmail.com>
Subject: Re: [GMCnet] Onan Oil Pressure Switch installation
To: gmclist@temp.gmcnet.org
Date: Saturday, July 2, 2011, 3:36 AM
If you cannot use a socket then how to install? What size socket is needed??
William S. Schurman
P.O. 773325
Steamboat Springs, CO (Ski Town USA)
at the foot of Rabbit Ears Pass
970-846-4212
'78 Palm Beach TZE 168V100258
'90 SHO
'66 912
> From: hend4800@bellsouth.net
> Date: Fri, 1 Jul 2011 22:39:33 -0400
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Onan Oil Pressure Switch
>
> Hal,
>
> Want me to send you mine? No telling when I'll need it again since I
> don't have an Onan.
>
> Ken H.
>
>
> On Fri, Jul 1, 2011 at 10:30 PM, Hal Kading wrote:
> >
> >
> > I bought the special socket as well. Waste of money as there is no way to get it on the switch. Not enough room.
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
