Home » Public Forums » GMCnet » [GMCnet] Tachometer
| [GMCnet] Tachometer [message #131500] |
Wed, 22 June 2011 16:52  |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I've no need for the 10 inch high dollar 10K rpm tachs for the coach. I found a small one for cheap - Sun's budget line - which goes to 8K. Now, I can't see any reason whatsoever to twist this thing beyond 4K, so I'm in the process of renumbering the dial and running it in 4cyl mode, where the 8 cyl pulsetrain will make it read double. Might pin it coming down Monteagle east of Gnashville, but otherwise, 4K should be plenty.
Next time I get over to home, I'll see if someone at the airport has a leftover MAP gauge, meantimes I managed to find a combo vacuum/boost one that will at least keep my foot out of it.
--johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Tachometer [message #131502 is a reply to message #131500] |
Wed, 22 June 2011 17:25  |
|
|
If you hit the top end coming down Monteagle in either direction let me know
to not be around. I hate seeing road kill.
By the way, last Saturday some hotshot driver in a 4x4 SUV managed to flip
his Chevy in the rain. He was Heading down toward Nickajack and about
half-way to the truck pullout. Some fools think they have more traction in a
4x4 than they really do. I'll bet the same guy always slid to a stop in snow
and wondered why he didn't have improved handling when slowing since he had
better luck taking off.
Agree, 4K rpms is enough. I seldom get above 3400. Even then I'm thinking a
liftoff is eminent.
--
Byron Songer
1978 GMC Royale
Louisville, KY
http://www.gmceast.com
http://web.me.com/bnsonger
Johnny Bridges wrote:
> I've no need for the 10 inch high dollar 10K rpm tachs for the coach. I found
> a small one for cheap - Sun's budget line - which goes to 8K. Now, I can't
> see any reason whatsoever to twist this thing beyond 4K, so I'm in the process
> of renumbering the dial and running it in 4cyl mode, where the 8 cyl
> pulsetrain will make it read double. Might pin it coming down Monteagle east
> of Gnashville, but otherwise, 4K should be plenty.
> Next time I get over to home, I'll see if someone at the airport has a
> leftover MAP gauge, meantimes I managed to find a combo vacuum/boost one that
> will at least keep my foot out of it.
>
> --johnny
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
|
| Re: [GMCnet] Tachometer [message #131512 is a reply to message #131500] |
Wed, 22 June 2011 18:04 |
Gary Worobec
Messages: 867
Registered: May 2005
Karma: -1
|
Senior Member |
|
|
You might want to consider the TachVac. A bunch of us did a group buy a
while back and got these. Nice and small and having the RPM and the VAC on
the same gauge makes sense from a diagnostic point of view.
http://www.gmcmotorhome.com/tech/tachvac/index.html
Thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
----- Original Message -----
From: "Johnny Bridges" <jhbridges@ymail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Wednesday, June 22, 2011 2:52 PM
Subject: [GMCnet] Tachometer
I've no need for the 10 inch high dollar 10K rpm tachs for the coach. I
found a small one for cheap - Sun's budget line - which goes to 8K. Now, I
can't see any reason whatsoever to twist this thing beyond 4K, so I'm in the
process of renumbering the dial and running it in 4cyl mode, where the 8 cyl
pulsetrain will make it read double. Might pin it coming down Monteagle east
of Gnashville, but otherwise, 4K should be plenty.
Next time I get over to home, I'll see if someone at the airport has a
leftover MAP gauge, meantimes I managed to find a combo vacuum/boost one
that will at least keep my foot out of it.
--johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
| Re: [GMCnet] Tachometer [message #131523 is a reply to message #131522] |
Wed, 22 June 2011 19:18 |
k2gkk
Messages: 4452
Registered: November 2009
Karma: -8
|
Senior Member |
|
|
I wasn't able to decipher which model number
might have been the Tach-Vac.
I want one, also!
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~~ ~ ~ (TZE166V101966) ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
----------------------------------------
> From: gtw5@earthlink.net
> To: gmclist@temp.gmcnet.org
> Date: Wed, 22 Jun 2011 17:15:45 -0700
> Subject: Re: [GMCnet] Tachometer
>
> I can;t recall who set the deal up. But if he chimes in maybe there might be
> GMC discount.
>
> Thanks,
>
> Gary Worobec
> Director, Product Development
> PAXTON/PATTERSON
> (O) 951-763-0518
> (C) 773-230-6226
> gtw5@earthlink.net
> www.paxtonpatterson.com
>
>
>
> ----- Original Message -----
> From: "Desmond" <980@opg.org>
> To: <gmclist@temp.gmcnet.org>
> Sent: Wednesday, June 22, 2011 4:17 PM
> Subject: Re: [GMCnet] Tachometer
>
>
> >A Tach-Vac is exactly what I want.
> >
> > Looking at that site they look like they're about $300. Is that the right
> > cost for one of these or is there another way?
> >
> > DC
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Tachometer [message #131537 is a reply to message #131523] |
Wed, 22 June 2011 20:27 |
Gary Worobec
Messages: 867
Registered: May 2005
Karma: -1
|
Senior Member |
|
|
JimK carries them I think.
http://www.appliedgmc.com/prod.itml/icOid/739
Thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
----- Original Message -----
From: "D C *Mac* Macdonald" <k2gkk@hotmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Wednesday, June 22, 2011 5:18 PM
Subject: Re: [GMCnet] Tachometer
>
> I wasn't able to decipher which model number
> might have been the Tach-Vac.
>
> I want one, also!
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~~ ~ ~ (TZE166V101966) ~ ~ ~~
> ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
>
>
> ----------------------------------------
>> From: gtw5@earthlink.net
>> To: gmclist@temp.gmcnet.org
>> Date: Wed, 22 Jun 2011 17:15:45 -0700
>> Subject: Re: [GMCnet] Tachometer
>>
>> I can;t recall who set the deal up. But if he chimes in maybe there might
>> be
>> GMC discount.
>>
>> Thanks,
>>
>> Gary Worobec
>> Director, Product Development
>> PAXTON/PATTERSON
>> (O) 951-763-0518
>> (C) 773-230-6226
>> gtw5@earthlink.net
>> www.paxtonpatterson.com
>>
>>
>>
>> ----- Original Message -----
>> From: "Desmond" <980@opg.org>
>> To: <gmclist@temp.gmcnet.org>
>> Sent: Wednesday, June 22, 2011 4:17 PM
>> Subject: Re: [GMCnet] Tachometer
>>
>>
>> >A Tach-Vac is exactly what I want.
>> >
>> > Looking at that site they look like they're about $300. Is that the
>> > right
>> > cost for one of these or is there another way?
>> >
>> > DC
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Tachometer [message #131540 is a reply to message #131523] |
Wed, 22 June 2011 20:33 |
|
|
I thought Bill Brown had his hands around this.
carguybill@sbcglobal.net
Of course, JimK @ Applied has them on his website
http://www.appliedgmc.com/level.itml/icOid/451
~$300 is what to expect.
I taught my wife to watch the vac as well as the tach when going up hill.
She's more conscientious than I about not letting the vac get to 6. Of
course, there are times I've had to open the trap door in the floor and
start swing the pedals into position.
--
Byron Songer
1978 GMC Royale
Louisville, KY
http://www.gmceast.com
http://web.me.com/bnsonger
D C *Mac* Macdonald wrote:
>
> I wasn't able to decipher which model number
> might have been the Tach-Vac.
>
> I want one, also!
>
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> ~~ ~ D C "Mac" Macdonald ~ ~~
> ~ ~ Amateur Radio - K2GKK ~ ~
> ~ ~ USAF and FAA, Retired ~ ~
> ~ ~ ~ Oklahoma City, OK ~ ~ ~
> ~~ ~ ~ "The Money Pit" ~ ~ ~~
> ~~ ~ ~ (TZE166V101966) ~ ~ ~~
> ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
> ~ www.gmcmhphotos.com/okclb ~
> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
>
>
> ----------------------------------------
>> From: gtw5@earthlink.net
>> To: gmclist@temp.gmcnet.org
>> Date: Wed, 22 Jun 2011 17:15:45 -0700
>> Subject: Re: [GMCnet] Tachometer
>>
>> I can;t recall who set the deal up. But if he chimes in maybe there might be
>> GMC discount.
>>
>> Thanks,
>>
>> Gary Worobec
>> Director, Product Development
>> PAXTON/PATTERSON
>> (O) 951-763-0518
>> (C) 773-230-6226
>> gtw5@earthlink.net
>> www.paxtonpatterson.com
>>
>>
>>
>> ----- Original Message -----
>> From: "Desmond" <980@opg.org>
>> To: <gmclist@temp.gmcnet.org>
>> Sent: Wednesday, June 22, 2011 4:17 PM
>> Subject: Re: [GMCnet] Tachometer
>>
>>
>>> A Tach-Vac is exactly what I want.
>>>
>>> Looking at that site they look like they're about $300. Is that the right
>>> cost for one of these or is there another way?
>>>
>>> DC
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
|
| Re: [GMCnet] Tachometer [message #131541 is a reply to message #131500] |
Wed, 22 June 2011 20:34 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Johnny,
JimB helped me install one of these panels under the steering column:
http://www.appliedgmc.com/prod.itml/icOid/501
with these cheap Harbor Freight Gauges:
http://tinyurl.com/6a8ke43
http://www.harborfreight.com/catalogsearch/result/?¤tpage=2&RequestDat
a=CA_AttributeSelected&ResultsPerPage=27&defsortcols=&q=gages&category=&mode
=grid&AttribSel=Brand='Nitrous'&category=&CatPath=All+Products%2F%2F%2F%2FUs
erSearch%3Dgages
I got them on sale for $19.99 each; I am FULLY aware that they are probably
not as accurate as Stewart Warner, VDO, Sun, etc; however, I reckon they're
good enough as I also have the OEM instruments and a Digi-Panel. BTW they do
read close to the Digi-Panel.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Johnny Bridges
Sent: Thursday, June 23, 2011 7:53 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Tachometer
I've no need for the 10 inch high dollar 10K rpm tachs for the coach. I
found a small one for cheap - Sun's budget line - which goes to 8K. Now, I
can't see any reason whatsoever to twist this thing beyond 4K, so I'm in the
process of renumbering the dial and running it in 4cyl mode, where the 8 cyl
pulsetrain will make it read double. Might pin it coming down Monteagle
east of Gnashville, but otherwise, 4K should be plenty.
Next time I get over to home, I'll see if someone at the airport has a
leftover MAP gauge, meantimes I managed to find a combo vacuum/boost one
that will at least keep my foot out of it.
--johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
| Re: [GMCnet] Tachometer [message #131550 is a reply to message #131500] |
Wed, 22 June 2011 21:17 |
PettyVTX
Messages: 363
Registered: April 2011
Location: Winder Ga.
Karma: 1
|
Senior Member |
|
|
I installed the Harbor freight guages. Between the 2 stock guages Tach on the bottom and the vac on top i think i use the vac guage more than any other guage. Im like Marvin Gaye I wanna know whats goin on
Ted
Ex Avion now looking for a 23'
Jeep Wrangler Towd
|
|
|
|
|
|
| Re: [GMCnet] Tachometer [message #131570 is a reply to message #131537] |
Wed, 22 June 2011 23:52 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
We have been selling them with range that makes sense.
On Wed, Jun 22, 2011 at 6:27 PM, Gary Worobec <gtw5@earthlink.net> wrote:
> JimK carries them I think.
>
> http://www.appliedgmc.com/prod.itml/icOid/739
>
> Thanks
>
> Gary and Joanne Worobec
> 1973 GMC Glacier
> Anza, CA
> ----- Original Message -----
> From: "D C *Mac* Macdonald" <k2gkk@hotmail.com>
> To: <gmclist@temp.gmcnet.org>
> Sent: Wednesday, June 22, 2011 5:18 PM
> Subject: Re: [GMCnet] Tachometer
>
>
>>
>> I wasn't able to decipher which model number
>> might have been the Tach-Vac.
>>
>> I want one, also!
>>
>> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
>> ~~ ~ D C "Mac" Macdonald ~ ~~
>> ~ ~ Amateur Radio - K2GKK ~ ~
>> ~ ~ USAF and FAA, Retired ~ ~
>> ~ ~ ~ Oklahoma City, OK ~ ~ ~
>> ~~ ~ ~ "The Money Pit" ~ ~ ~~
>> ~~ ~ ~ (TZE166V101966) ~ ~ ~~
>> ~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
>> ~ www.gmcmhphotos.com/okclb ~
>> ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
>>
>>
>> ----------------------------------------
>>> From: gtw5@earthlink.net
>>> To: gmclist@temp.gmcnet.org
>>> Date: Wed, 22 Jun 2011 17:15:45 -0700
>>> Subject: Re: [GMCnet] Tachometer
>>>
>>> I can;t recall who set the deal up. But if he chimes in maybe there might
>>> be
>>> GMC discount.
>>>
>>> Thanks,
>>>
>>> Gary Worobec
>>> Director, Product Development
>>> PAXTON/PATTERSON
>>> (O) 951-763-0518
>>> (C) 773-230-6226
>>> gtw5@earthlink.net
>>> www.paxtonpatterson.com
>>>
>>>
>>>
>>> ----- Original Message -----
>>> From: "Desmond" <980@opg.org>
>>> To: <gmclist@temp.gmcnet.org>
>>> Sent: Wednesday, June 22, 2011 4:17 PM
>>> Subject: Re: [GMCnet] Tachometer
>>>
>>>
>>> >A Tach-Vac is exactly what I want.
>>> >
>>> > Looking at that site they look like they're about $300. Is that the
>>> > right
>>> > cost for one of these or is there another way?
>>> >
>>> > DC
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Tachometer [message #131586 is a reply to message #131541] |
Thu, 23 June 2011 06:25 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
That's the direction I'm headed - I'm interested in trends. I like to see MAP trending up, and engine speed out of the lug range. Absolutes in this situation aren't as important. When the lottery comes in, complete new dash. Until then, I'll have to soldier on with the original plus a couple of necessary add - ons.
--johnny
--- On Thu, 6/23/11, Rob Mueller <robmueller@iinet.net.au> wrote:
From: Rob Mueller <robmueller@iinet.net.au>
Subject: Re: [GMCnet] Tachometer
To: gmclist@temp.gmcnet.org
Date: Thursday, June 23, 2011, 1:34 AM
Johnny,
JimB helped me install one of these panels under the steering column:
http://www.appliedgmc.com/prod.itml/icOid/501
with these cheap Harbor Freight Gauges:
http://tinyurl.com/6a8ke43
http://www.harborfreight.com/catalogsearch/result/?Ītpage=2&RequestDat
a=CA_AttributeSelected&ResultsPerPage=27&defsortcols=&q=gages&category=&mode
=grid&AttribSel=Brand='Nitrous'&category=&CatPath=All+Products%2F%2F%2F%2FUs
erSearch%3Dgages
I got them on sale for $19.99 each; I am FULLY aware that they are probably
not as accurate as Stewart Warner, VDO, Sun, etc; however, I reckon they're
good enough as I also have the OEM instruments and a Digi-Panel. BTW they do
read close to the Digi-Panel.
Regards,
Rob M.
USAussie - Downunder
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Johnny Bridges
Sent: Thursday, June 23, 2011 7:53 AM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Tachometer
I've no need for the 10 inch high dollar 10K rpm tachs for the coach. I
found a small one for cheap - Sun's budget line - which goes to 8K. Now, I
can't see any reason whatsoever to twist this thing beyond 4K, so I'm in the
process of renumbering the dial and running it in 4cyl mode, where the 8 cyl
pulsetrain will make it read double. Might pin it coming down Monteagle
east of Gnashville, but otherwise, 4K should be plenty.
Next time I get over to home, I'll see if someone at the airport has a
leftover MAP gauge, meantimes I managed to find a combo vacuum/boost one
that will at least keep my foot out of it.
--johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Tachometer [message #131604 is a reply to message #131512] |
Thu, 23 June 2011 07:23 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I looked at it. It was a little pricey for what I'm attempting to do. But would make a nice clean installation.
--johnny
--- On Wed, 6/22/11, Gary Worobec <gtw5@earthlink.net> wrote:
From: Gary Worobec <gtw5@earthlink.net>
Subject: Re: [GMCnet] Tachometer
To: gmclist@temp.gmcnet.org
Date: Wednesday, June 22, 2011, 11:04 PM
You might want to consider the TachVac. A bunch of us did a group buy a
while back and got these. Nice and small and having the RPM and the VAC on
the same gauge makes sense from a diagnostic point of view.
http://www.gmcmotorhome.com/tech/tachvac/index.html
Thanks
Gary and Joanne Worobec
1973 GMC Glacier
Anza, CA
----- Original Message -----
From: "Johnny Bridges" <jhbridges@ymail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Wednesday, June 22, 2011 2:52 PM
Subject: [GMCnet] Tachometer
I've no need for the 10 inch high dollar 10K rpm tachs for the coach. I
found a small one for cheap - Sun's budget line - which goes to 8K. Now, I
can't see any reason whatsoever to twist this thing beyond 4K, so I'm in the
process of renumbering the dial and running it in 4cyl mode, where the 8 cyl
pulsetrain will make it read double. Might pin it coming down Monteagle east
of Gnashville, but otherwise, 4K should be plenty.
Next time I get over to home, I'll see if someone at the airport has a
leftover MAP gauge, meantimes I managed to find a combo vacuum/boost one
that will at least keep my foot out of it.
--johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Tachometer [message #131635 is a reply to message #131586] |
Thu, 23 June 2011 09:00 |
|
|
Have you bought the winning ticket yet? If not, I'll send you some money so
we can share the profit if that's OK with you. Shucks, might as well send
enough to buy two winning tickets.
--
Byron Songer
1978 GMC Royale
Louisville, KY
http://www.gmceast.com
http://web.me.com/bnsonger
Johnny Bridges wrote:
> That's the direction I'm headed - I'm interested in trends. I like to see MAP
> trending up, and engine speed out of the lug range. Absolutes in this
> situation aren't as important. When the lottery comes in, complete new dash.
> Until then, I'll have to soldier on with the original plus a couple of
> necessary add - ons.
>
> --johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Byron Songer
Full-timing to enjoy the USA
Former owner but still an admirer
GMC paint schemes at -
http://www.songerconsulting.net
|
|
|
|
| Re: [GMCnet] Tachometer [message #131642 is a reply to message #131635] |
Thu, 23 June 2011 09:30 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Send the bux, I'll buy you as many as you wanna oay for. I only buy when the money odds exceed the winning odds. And when I >do< win, the Bureau of Standards needs to get one of those chambers at 0C and controlled atmosphere and put me in it with a plaque which says "Standrd Sorry S.O.B.". I'll show yall what 'sorry' really is!
Kanomata will rent me a competent mechanic to follow the GMC and keep it up. Songer Consuiting will rent me a kid to make all my decisions.
"Kid, what do I want for breakfast?" "You want eggs over hard and a waffle". Then "Kid, what do I wear today?" "You want your nice pants, you're showing this afternnon. Then you're gonna have some beer and relax." Etc.
--johnny
--- On Thu, 6/23/11, Byron Songer <bsonger@songerconsulting.net> wrote:
From: Byron Songer <bsonger@songerconsulting.net>
Subject: Re: [GMCnet] Tachometer
To: gmclist@temp.gmcnet.org
Date: Thursday, June 23, 2011, 2:00 PM
Have you bought the winning ticket yet? If not, I'll send you some money so
we can share the profit if that's OK with you. Shucks, might as well send
enough to buy two winning tickets.
--
Byron Songer
1978 GMC Royale
Louisville, KY
http://www.gmceast.com
http://web.me.com/bnsonger
Johnny Bridges wrote:
> That's the direction I'm headed - I'm interested in trends. I like to see MAP
> trending up, and engine speed out of the lug range. Absolutes in this
> situation aren't as important. When the lottery comes in, complete new dash.
> Until then, I'll have to soldier on with the original plus a couple of
> necessary add - ons.
>
> --johnny
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
Goto Forum:
Current Time: Wed Oct 23 00:22:08 CDT 2024
Total time taken to generate the page: 0.01560 seconds
|
GMCforum
Search
Help
Register
Login
Home
