GMCforum: GMCnet » Fuel Line Question

Home » Public Forums » GMCnet » Fuel Line Question (Sizing....)

Show: Today's Messages :: Polls :: Message Navigator

Fuel Line Question [message #131092]

Mon, 20 June 2011 13:03

Jon payne

Messages: 495
Registered: May 2008

Karma:

Senior Member

Hi all,

I am planning on dropping the fuel tanks later this summer. I would like to replace the fuel feed hoses with steel tubing. I have some doubts on the sizing of the hoses and tubing. I have read on GMCMOTORHOME.INFO page that the fuel feed hoses are 3/8" but does not mention if that is ID or OD. Looking at steel tubing the sizes are all in O.D.

Can someone please clarify the sizing of the rubber hoses? If different from steel tubing (ID vs OD) what is the proper steel tubing size for the fuel feed?

Thanks,
Jon

Jon Payne
76 Palm Beach
Westfield,IN

Report message to a moderator

[Message index]

		Fuel Line Question By: Jon payne on Mon, 20 June 2011 13:03
		Re: [GMCnet] Fuel Line Question By: Ken Henderson on Mon, 20 June 2011 13:30
		Re: [GMCnet] Fuel Line Question By: Jon payne on Mon, 20 June 2011 14:09
		Re: [GMCnet] Fuel Line Question By: USAussie on Mon, 20 June 2011 17:02
		Re: [GMCnet] Fuel Line Question By: Ken Henderson on Mon, 20 June 2011 18:47
		Re: [GMCnet] Fuel Line Question By: USAussie on Mon, 20 June 2011 19:04
		Re: [GMCnet] Fuel Line Question By: Ken Burton on Tue, 21 June 2011 00:33
		Re: [GMCnet] Fuel Line Question By: Ken Henderson on Tue, 21 June 2011 06:49
		Re: Fuel Line Question By: GeorgeRud on Mon, 20 June 2011 18:46
		Re: Fuel Line Question By: Duce Apocalypse on Tue, 21 June 2011 13:26

Previous Topic:	[GMCnet] New Isoloation Pads
Next Topic:	New oil specifications

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 24 05:22:15 CDT 2024

Total time taken to generate the page: 0.01790 seconds