| [GMCnet] Onan 6000 Flywheel [message #130917] |
Sun, 19 June 2011 17:16  |
Glen And Rose
Messages: 36
Registered: June 2011
Karma:
|
Member |
|
|
Folks,
I've spent several days cleaning the accumulated oil off of the Onan 6000 so that I can check all of the wiring, shut offs etc., and ultimately sort out why it won't crank from inside the coach. I think I have that all figured out already. But, I'm down to the flywheel and want to pull that so that I can clean behind it. Some of the oil in the hard to reach spaces behind the flywheel has been there long enough to almost be a lacquer. I can build a puller to fit the 4 tapped holes, no problem there and I can reverse that to push it back on very carefully. The center bolt that holds the flywheel to the crank shaft is my concern. Do you turn this CCW or is it CW to remove the bolt.
Glen
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
