Re: [GMCnet] Vapor Lock Question [message #128933] |
Mon, 06 June 2011 15:02 |
Richard Brown
Messages: 281 Registered: May 2009
Karma:
|
Senior Member |
|
|
Another thing to consider is what happened to me when I owned a 75 Chevy PU with HEI. It was doing the same thing. I thought it may have been vapor lock, but it turned out that the PO had installed a new module in the distributor without putting heat grease under it. Eventually it failed completely.I learned that when replacing the module be sure to spray some carb cleaner on a rag & clean the mounting surfaces thoroughly,including the bottom of the module, then put heat grease on the module & install
Richard & Carol Brown
1974 Eleganza SE
"DILLIGAF"
Lindale, Tx. 75771
903-881-0192
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Richard & Carol Brown
1974 Eleganza SE
1174 Hickory Hills Dr.
Murchison, TX. 75778
|
|
|