GMCforum: GMCnet » [GMCnet] Engine Cover

Home » Public Forums » GMCnet » [GMCnet] Engine Cover

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Engine Cover [message #128323]

Thu, 02 June 2011 11:53

Arthur Mansfield

Messages: 290
Registered: April 2010

Karma:

Senior Member

I just realized the front of my engine cover is not held down by anything. There are two large bolts in the front that are not attached to anything. I guess the bolts used to have something to do with the hold down. I was thinking of purchasing a piece of 1/16 sheet metal that goes under the engine cover and extends up under the floor to hold the cover down in the front and held in place with the two large bolts. Is this the way it is supposed to be done.

I am planning to make a new engine cover next year.

I realized the problem when I replaced the seal on the cover.

ART & DORIS
76 EL
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Engine Cover By: Arthur Mansfield on Thu, 02 June 2011 11:53
		Re: [GMCnet] Engine Cover By: James Hupy on Thu, 02 June 2011 12:08
		Re: [GMCnet] Engine Cover By: Donovan-formerly Jase386 on Thu, 02 June 2011 12:35
		Re: [GMCnet] Engine Cover By: jimk on Thu, 02 June 2011 13:20
		Re: [GMCnet] Engine Cover By: Arthur Mansfield on Thu, 02 June 2011 15:23
		Re: [GMCnet] Engine Cover By: WD0AFQ on Thu, 02 June 2011 15:31
		Re: [GMCnet] Engine Cover By: jimk on Fri, 03 June 2011 00:04

Previous Topic:	Anyone installed the "Silvertone" airbags? I think I have a problem
Next Topic:	[GMCnet] mailing list

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Sep 25 16:13:45 CDT 2024

Total time taken to generate the page: 0.01292 seconds