Re: [GMCnet] Height Level Valve [message #128083] |
Tue, 31 May 2011 12:34 |
KB
Messages: 1262 Registered: September 2009
Karma:
|
Senior Member |
|
|
Wow, I'm always amazed at how other people pipe up with questions here
that just happen to be about something I'm facing...
We were working on our ride height yesterday. I'd already replaced
both leveling valves with new ones from JimK because the old ones were toast.
But, we still can't get the rear of the coach high enough. It's always about
1 to 1.5 inches too low. Judging by the drag damage on the rear frame,
this has long been a problem on this coach.
I can only guess that the mounting plates in the fender are in the wrong place.
My choices, I think are re-mount the valves, or use an adjustable link.
thanks,
Karen (now off to search for pictures of the adjustable links...)
1975 26' tail dragger
1973 23' yard ornament
>
> NOTE: Dave also sells adjustable links that replace the fixed length ones.
>
> Ken Henderson also sells adjustable length links:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Karen
1975 26'
San Jose, CA
|
|
|