GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Fuel sender location again and black list
[GMCnet] Fuel sender location again and black list [message #127825] Sat, 28 May 2011 18:41 Go to next message
SergeL is currently offline  SergeL   United States
Messages: 169
Registered: January 2011
Karma: 0
Senior Member
I have read almost all of the email's about the sender locations and printed
out drawings that people have been nice enough to draw out, unfortunately I
can not tell what length GMC these drawings are for. I have a 1973 26' unit,
could someone guide me to the proper drawings for measurements.

Do I have to pull the tanks or can I use a router and set the depth as not
to go in to deep to cut the hole ?, I don't want my wife to see a flash and
hear a big boom.


Any input would be appreciated.


I have signed in and asked to be put on the Black list a couple of times
over the last few months and I am still not on the list, besides filling out
the form and giving all the information, what else do I need to do? How
often does the list get updated?



Serge
1973 GMC 26'
Deming New Mexico
I have a full hookup spot for any one coming this direction
Within 1 mile of 2 state parks.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Fuel sender location again and black list [message #127828 is a reply to message #127825] Sat, 28 May 2011 18:44 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Roger Black,
Quit feeding me those GRITS and help this man get on you list.


On Sat, May 28, 2011 at 4:41 PM, Serge Leduc <greatmoments60@hotmail.com> wrote:
> I have read almost all of the email's about the sender locations and printed
> out drawings that people have been nice enough to draw out, unfortunately I
> can not tell what length GMC these drawings are for. I have a 1973 26' unit,
> could someone guide me to the proper drawings for measurements.
>
> Do I have to pull the tanks or can I use a router and set the depth as not
> to go in to deep to cut the hole ?, I don't want my wife to see a flash and
> hear a big boom.
>
>
> Any input would be appreciated.
>
>
> I have signed in and asked to be put on the Black list a couple of times
> over the last few months and I am still not on the list, besides filling out
> the form and giving all the information, what else do I need to do? How
> often does the list get updated?
>
>
>
> Serge
> 1973 GMC 26'
> Deming New Mexico
> I have a full hookup spot for any one coming this direction
> Within 1 mile of 2 state parks.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: [GMCnet] Fuel sender location again and black list [message #128035 is a reply to message #127825] Mon, 30 May 2011 23:06 Go to previous message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
did you read here?
http://gmcmotorhome.info/Fuel.html#senders

they are all called out
gene


On Sat, May 28, 2011 at 4:41 PM, Serge Leduc <greatmoments60@hotmail.com>wrote:

> I have read almost all of the email's about the sender locations and
> printed
> out drawings that people have been nice enough to draw out, unfortunately I
> can not tell what length GMC these drawings are for. I have a 1973 26'
> unit,
> could someone guide me to the proper drawings for measurements.
>
> Do I have to pull the tanks or can I use a router and set the depth as not
> to go in to deep to cut the hole ?, I don't want my wife to see a flash and
> hear a big boom.
>
>
> Any input would be appreciated.
>
>
> I have signed in and asked to be put on the Black list a couple of times
> over the last few months and I am still not on the list, besides filling
> out
> the form and giving all the information, what else do I need to do? How
> often does the list get updated?
>
>
>
> Serge
> 1973 GMC 26'
> Deming New Mexico
> I have a full hookup spot for any one coming this direction
> Within 1 mile of 2 state parks.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Previous Topic: Dana compressor air filter issue
Next Topic: Re: [GMCnet] 1970 Ultra Van - well worth a look
Goto Forum:
  


Current Time: Mon Sep 23 10:32:28 CDT 2024

Total time taken to generate the page: 0.01449 seconds