GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Anyone installed the "Silvertone" airbags? I think I have a problem
Anyone installed the "Silvertone" airbags? I think I have a problem [message #127798] Sat, 28 May 2011 15:42 Go to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
I have a leaky airbag so I ordered a set of Jim K's Silvertone airbags. Sorry Quadrabager but I like the idea of the OEM style.

Anyway I have one installed and at set height the airbag appears to be extended to max. According to Firestone the design length of this airbag (not including the extension for our application) is 9-10.5". Its sitting at 12.3" right now.

The max jounce lenght is 14.7", but I think thats unloaded height.

Compairing the cone from the uninstalled bag, its completely unrolled at this point. At my set height the distance between the bogie airbag arms is 14.75" and the extensions on the airbags are 2.625"

Does this sound right? If so I don't think I can raise it manually any higher than what it is now.

I called Applied but I guess Jim took one saturday off! Shocked

Any ideas?

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: A/C compressor
Next Topic: [GMCnet] Engine Cover
Goto Forum:
  


Current Time: Wed Sep 25 14:23:05 CDT 2024

Total time taken to generate the page: 0.11287 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software