Home » Public Forums » GMCnet » Free electronic ignition for an Onan generator (Not sure if it will fit the power drawer or not)
| Free electronic ignition for an Onan generator [message #127480] |
Wed, 25 May 2011 20:37  |
idrob
Messages: 645
Registered: January 2005
Location: Central Idaho
Karma: 0
|
Senior Member |
|
|
Some years ago when I had a SOB with a 6000 watt Onan (not a powerdrawer, like on the GMC) I purchased an electronic ignition for it from Camping World. For a number of reasons It was never installed and the rig is long gone now. Price was around $100 as I recall
I found it in the basement today. I believe it is a genuine Onan part, but the instructions do not have any brand on them at all, only that it is a Kit 160-1376 and the other number on the paper is C385a. It replaces the points on the Onan, but again, I am not sure what models or if it will fit the Power Drawer. I have the module and the instruction sheets. The sheets show how to time the original ignition points and then replace that point unit with this electronic module.
If anyone would like it to experiment with I would get it to you for $5 in postage as the only cost. Please don't ask for it if you have no idea of what to do with it. I would like it to go to a good home, and had some real use, or someone who was an avid experimenter and would like to tinker with it. Again, brand new, never installed.
As I was writing this post I did a Google search of the part number and found this article by Chuck Aulgur at a GMC rally in 1999, so it may fit the power drawer too.
http://www.gmcws.org/Tech/onan_electronic_ignition/onan_electronic_ignition.html
First reasonable email request will get it. profmail at wildblue dot net.
Rob Allen
former owner of '76 x-PB
|
|
|
|
| Re: [GMCnet] Free electronic ignition for an Onan generator [message #127481 is a reply to message #127480] |
Wed, 25 May 2011 20:40  |
Sammy Williams
Messages: 522
Registered: August 2010
Karma: -2
|
Senior Member |
|
|
If I had a gmc is ask for it. Lol s.Williams
On May 25, 2011 8:37 PM, "Rob Allen" <profmail@wildblue.net> wrote:
>
>
> Some years ago when I had a SOB with a 6000 watt Onan (not a powerdrawer,
like on the GMC) I purchased an electronic ignition for it from Camping
World. For a number of reasons It was never installed and the rig is long
gone now. Price was around $100 as I recall
>
> I found it in the basement today. I believe it is a genuine Onan part, but
the instructions do not have any brand on them at all, only that it is a Kit
160-1376 and the other number on the paper is C385a. It replaces the points
on the Onan, but again, I am not sure what models or if it will fit the
Power Drawer. I have the module and the instruction sheets. The sheets show
how to time the original ignition points and then replace that point unit
with this electronic module.
>
> If anyone would like it to experiment with I would get it to you for $5 in
postage as the only cost. Please don't ask for it if you have no idea of
what to do with it. I would like it to go to a good home, and had some real
use, or someone who was an avid experimenter and would like to tinker with
it. Again, brand new, never installed.
>
> As I was writing this post I did a Google search of the part number and
found this article by Chuck Aulgur at a GMC rally in 1999, so it may fit the
power drawer too.
>
>
http://www.gmcws.org/Tech/onan_electronic_ignition/onan_electronic_ignition.html
>
> First reasonable email request will get it. profmail at wildblue dot net.
>
>
> --
> Rob Allen
> former owner of '76 x-PB
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: Free electronic ignition for an Onan generator [message #127482 is a reply to message #127480] |
Wed, 25 May 2011 20:48 |
 |
WD0AFQ
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
| idrob wrote on Wed, 25 May 2011 20:37 |
Some years ago when I had a SOB with a 6000 watt Onan (not a powerdrawer, like on the GMC) I purchased an electronic ignition for it from Camping World. For a number of reasons It was never installed and the rig is long gone now. Price was around $100 as I recall
I found it in the basement today. I believe it is a genuine Onan part, but the instructions do not have any brand on them at all, only that it is a Kit 160-1376 and the other number on the paper is C385a. It replaces the points on the Onan, but again, I am not sure what models or if it will fit the Power Drawer. I have the module and the instruction sheets. The sheets show how to time the original ignition points and then replace that point unit with this electronic module.
If anyone would like it to experiment with I would get it to you for $5 in postage as the only cost. Please don't ask for it if you have no idea of what to do with it. I would like it to go to a good home, and had some real use, or someone who was an avid experimenter and would like to tinker with it. Again, brand new, never installed.
As I was writing this post I did a Google search of the part number and found this article by Chuck Aulgur at a GMC rally in 1999, so it may fit the power drawer too.
http://www.gmcws.org/Tech/onan_electronic_ignition/onan_electronic_ignition.html
First reasonable email request will get it. profmail at wildblue dot net.
|
Ill pay shipping for it Rob.
Was that reasonable email?
dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
|
| Re: Free electronic ignition for an Onan generator [message #127483 is a reply to message #127480] |
Wed, 25 May 2011 20:51 |
idrob
Messages: 645
Registered: January 2005
Location: Central Idaho
Karma: 0
|
Senior Member |
|
|
| idrob wrote on Wed, 25 May 2011 18:37 |
Some years ago when I had a SOB with a 6000 watt Onan (not a powerdrawer, like on the GMC) I purchased an electronic ignition for it from Camping World. For a number of reasons It was never installed and the rig is long gone now. Price was around $100 as I recall
If anyone would like it to experiment with I would get it to you for $5 in postage as the only cost.
As I was writing this post I did a Google search of the part number and found this article by Chuck Aulgur at a GMC rally in 1999, so it may fit the power drawer too.
http://www.gmcws.org/Tech/onan_electronic_ignition/onan_electronic_ignition.html
First reasonable email request will get it. profmail at wildblue dot net.
|
It has been spoken for now, and will go to a very good home of one of the most helpful GMC people on the net. I am happy for that.
Rob Allen
former owner of '76 x-PB
|
|
|
|
| Re: [GMCnet] Free electronic ignition for an Onan generator [message #127484 is a reply to message #127480] |
Wed, 25 May 2011 20:50 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Rob,
If that's the P/N in Chuck's article, it will work on the power
drawer. I found a good deal on one in Tacoma in 2000 and installed
it. It was an improvement over the points, but not nearly as much of
one as the Lawrence Gaskins method we now use. The problem with that
setup (also build by Pertronix, according to their tech) is that it's
operated by the same vertical plunger as the points -- the source of
the erratic timing problem.
If someone does want to install it, and doesn't have the later model
point setup suggested by Chuck, it can be mounted in another way:
Reverse its intended orientation about the plunger, then mark, drill,
and tap 2 new mounting holes in the block. Really quite easy.
That one failed after a couple of years, forcing me into the fortunate
need to follow Lawrence's lead -- he'd just published the method.
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI+ & EBL
www.gmcwipersetc.com
On Wed, May 25, 2011 at 9:37 PM, Rob Allen <profmail@wildblue.net> wrote:
>
>
> Some years ago when I had a SOB with a 6000 watt Onan (not a powerdrawer, like on the GMC) I purchased an electronic ignition for it from Camping World. For a number of reasons It was never installed and the rig is long gone now. Price was around $100 as I recall
>
> I found it in the basement today. I believe it is a genuine Onan part, but the instructions do not have any brand on them at all, only that it is a Kit 160-1376 and the other number on the paper is C385a. It replaces the points on the Onan, but again, I am not sure what models or if it will fit the Power Drawer. I have the module and the instruction sheets. The sheets show how to time the original ignition points and then replace that point unit with this electronic module.
>
> If anyone would like it to experiment with I would get it to you for $5 in postage as the only cost. Please don't ask for it if you have no idea of what to do with it. I would like it to go to a good home, and had some real use, or someone who was an avid experimenter and would like to tinker with it. Again, brand new, never installed.
>
> As I was writing this post I did a Google search of the part number and found this article by Chuck Aulgur at a GMC rally in 1999, so it may fit the power drawer too.
>
> http://www.gmcws.org/Tech/onan_electronic_ignition/onan_electronic_ignition.html
>
> First reasonable email request will get it. profmail at wildblue dot net.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Sat Nov 16 20:42:30 CST 2024
Total time taken to generate the page: 0.00783 seconds
|
GMCforum
Search
Help
Register
Login
Home
