Bath Faucet diverter O rings [message #124863] |
Fri, 06 May 2011 16:35 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Our bath faucet looks and works great.. except the diverter for shower, it leaks lots into the sink.. wasting water.
The O rings look ok, but they must have issues. Anyone have the size for these two rings so I may source new ones?
thanks
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|
|
Re: Bath Faucet diverter O rings [message #124929 is a reply to message #124863] |
Fri, 06 May 2011 22:11 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I have exactly the same problem and have not been able to figure out what I did wrong when I replaced the O-rings. I loose as much water down the sink as I get to go through the shower.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: Bath Faucet diverter O rings [message #124944 is a reply to message #124863] |
Sat, 07 May 2011 07:51 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Hardie,
Unfortunately we don't have those stores on this side of the border and the kits i've seen are at industrial supply outlets at $$$
Dohhh! why don't I just take the little valve with me!! getting slowwwwww here!
Ken, thats about what we get too., yet everything looks good. Maybe someone replaced one ring with the wrong size in the past.
Trial and error I guess.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|